Artisan Equine Australia

Call Website

Artisan Equine Australia Custom-built horse walkers and treadmills. Designed for racehorses, thoroughbreds, rehab and daily horse exercise. Trusted by horse trainers across the country.

Australian-made, fully tailored to your setup, and backed with real after-sales support. Artisan Equine specialises in the fabrication and maintenance of high-quality equine training equipment like horse treadmills, walkers, crushes, and supporting products like stable mats. All of our products are manufactured in Australia in our Keysborough based factory. We have been supporting our customer across Australia, both for their Artisan Equine equipment and any other brand of horse training machines such as HorseGym and Magnum Equine.

Jess Mangan at the Equine Sport Institute in Brixton, New Zealand, now has a fully rebuilt HorseGym T4 galloping treadmi...
20/10/2026

Jess Mangan at the Equine Sport Institute in Brixton, New Zealand, now has a fully rebuilt HorseGym T4 galloping treadmill supplied by Artisan Equine.

This machine went through a complete rebuild in our Keysborough workshop before we were happy to send it off.

We gave it a full once-over, with a new belt, new bedplate and a host of other components, upgrades and additions. The treadmill then got loaded into a container, travelled over the ditch on a ship, went through quarantine and finally arrived on location in Brixton.

What a journey! Jess works in equine rehabilitation, and treadmill work is a great fit for that.

In the new year we’ll have a couple more used treadmills similar to this one available, so contact us for more details if you’re interested.

We also have our Essentials Horse Treadmill range if you prefer purchasing a brand new horse treadmill in a lower price range, without compromising quality.

Give us a call on 0431 437 127 or shoot us a message, and we can discuss what you need.

Made by hand. Built to last. Backed for life.

Comment "WALKER" below, and we will send you the link to our calculator to price up your customised horse walker in seco...
08/10/2026

Comment "WALKER" below, and we will send you the link to our calculator to price up your customised horse walker in seconds.

Every stable is set up differently, so you should only pay for what you actually need. Our Artisan Equine Essentials Horse Walker gives you the freedom to choose your horse number, diameter and bay width, all based on your personal requirements.

The base kit comes straight out of our Keysborough, Victoria workshop with a heavy-duty slew bearing, belt drive, and fully hot-dip galvanised frame.

From there, you decide whether to add our standard walls, legs, cut-to-size rubber mats, and whether you want us to install it or set it up yourself with our complete DIY fastener kit.

Want to talk about your horse walker build? Give us a call directly on 0431 437 127.

Made by hand. Built to last. Backed for life.

Canola season in the Riverina Murray on the way to Jerilderie.Never get sick of this. Endless fields of yellow as far as...
23/09/2026

Canola season in the Riverina Murray on the way to Jerilderie.

Never get sick of this. Endless fields of yellow as far as you can see, and not a cloud in the sky. One of the little things that makes the long drives worthwhile.

The new Hyundai van is settling in nicely too.

5-horse Premium Walker delivered and sitting on site at Scott and Rachel Wessel's place in Clonbinane, Victoria.This one...
01/09/2026

5-horse Premium Walker delivered and sitting on site at Scott and Rachel Wessel's place in Clonbinane, Victoria.

This one's a 12-metre unit with a roof, fully hot-dip galvanised and built right here in Keysborough. It's on site and ready to go, with installation coming up shortly.

Looking forward to getting out there and getting it commissioned.

Want to talk through a walker build for your setup? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

We’re excited about this first narrow bay Premium Walker installed and commissioned at Paul Sweeney and John Bourke’s st...
24/08/2026

We’re excited about this first narrow bay Premium Walker installed and commissioned at Paul Sweeney and John Bourke’s stables in Jerilderie, NSW.

About 19 months ago, we installed a Premium treadmill for him about 19 months ago, and now he's added a walker to the setup. This one's a 12-metre, 6-horse unit with narrow bays, fully hot-dip galvanised and built right here in Keysborough.

I think we need to hone in on the features of the Premium walker, such as being of a mono-rail construction. The narrow bay design is something some trainers specifically ask for.

It prevents horses from turning around in their bays, keeping them moving forward and focused on the work rather than testing their boundaries. They sometimes ask for it.

Let's not take away from the standard bay model, which is our preference.
A few finishing touches still to go with the wiring and walking surface mats, and then this one will be fully operational.

Need to say that Paul is organising this himself, otherwise people will think we just didn’t get around to it. Good to be back at Paul's place and see the treadmill still doing its job alongside the new walker.

Want to talk through a walker or treadmill build for your setup? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

24/08/2026

Comment “WALKER” in the comment section and you can find out how much an Essentials Horse Walker costs for the horse walker setup you need.

Use our online price calculator to choose your horse numbers, walker diameter, bay width, walls, rubber, walking surface, and installation. You can see the indicative price real-time as you choose your options.

Try it now.

If you have more questions, give us a call on 0431 437 127 or shoot us a message and we’ll be happy to assist you.

Made by hand. Built to last. Backed for life.

The stainless steel out-stands are installed. These are the mini-walls and bracketry that were fixed to the inner and ou...
21/08/2026

The stainless steel out-stands are installed. These are the mini-walls and bracketry that were fixed to the inner and outer pool walls that keep the horses safely off the concrete as they move around.

Every outstand is individually measured to keep the gap between the dividers and the walls consistent all the way around, not less than 75mm and not more than 85mm. Too wide, a horse can get a leg or nose caught as the gap closes. Getting this right took 36 individual sets of measurements to account for the normal irregularities associated with concrete works.

Still to come are the gates and the entrance way, and then this water walker will be ready to go.

Want to talk through a water walker or custom build for your setup? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

18/08/2026

The first step is to choose the number of horse bays. Then choose the walker diameter. We offer different diameter options for a given number of horse bays. Then choose whether you want standard bay width, or the narrow bay option.

With that, you have the mechanical heart of the machine covered. It has the centre pivot, arms, and dividers. We also include the electrical control box and VSD inverter, and mounting stand which drives the motor. The bolt kit and comprehensive instructions are also included. Everything is there to have the centre pivot operating.

From there, you can look at the other options. Standard walls, tall walls with 50 x 50 x 5mm mesh up top, rubber for the walls, a rubber walking surface mat kit (when installed on concrete).

You’re able to choose whether you’d like installation for the various components too.

You have so much freedom to customise your walker according to what you need for your horses and stable.

Every steel component is hot-dip galvanised throughout and built in Australia. Once manufactured, we ship them out to your location, anywhere within Australia and New Zealand.

Find out how much the horse walker you have in mind costs. Go to our website or comment “WALKER” in the comment section and we’ll send you the link to the Horse Walker Price Calculator.

Got more questions? Give us a call on 0431 437 127 or shoot us a message. We’ll be happy to help you out.

Made by hand. Built to last. Backed for life.

Out at Hunters Lodge in Glendon Brook, NSW to visit Cade Hunter.Cade bought a used HorseGym treadmill from us recently, ...
17/08/2026

Out at Hunters Lodge in Glendon Brook, NSW to visit Cade Hunter.

Cade bought a used HorseGym treadmill from us recently, and we made the trip out for the first post-sale check-up to make sure everything was running as it should. That's just part of how we do things — the sale doesn't end at the handover.

What struck me most about this visit was Cade himself. He's a young bloke who has built something seriously impressive out at Glendon Brook. The stables are outstanding, the facilities are well thought out, and the whole property has been put together with real care and attention to detail. But more than the bricks and mortar, it's his energy and passion that stands out. The kind of enthusiasm and drive that makes you feel good about the industry and the people coming through it.

It's always good to get out and meet the people behind the enquiries. This one was a highlight.

Give Cade and Hunters Lodge a follow — well worth it.

Want to talk through a treadmill purchase or service for your setup? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

Hunters Lodge Breaking & Pre Training

Out at Cross Park in Lower MacDonald, NSW for some minor repairs on a walker we installed a couple of years ago.The driv...
04/08/2026

Out at Cross Park in Lower MacDonald, NSW for some minor repairs on a walker we installed a couple of years ago.

The drive in is something else — autumn leaves lining the property entrance and hills in the background. One of those places that reminds you there are worse offices to work out of.

The walker itself is holding up well. A couple of minor things to sort out, which we did on the day, and it's back running as it should. That's what regular attention does — keeps small things from becoming big ones.
We'll be back for the ferry crossing photos shortly.

Need a service or repair on any brand of walker or treadmill? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

Address

33 Atlantic Drive
Keysborough, VIC
3173

Telephone

+61431437127

Website

Alerts

Be the first to know and let us send you an email when Artisan Equine Australia posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category