IBIM Consulting, 105 Stones Road, Sunnybankhills (2026)

24/07/2026

I am running a live webinar on Sequence Planner inside Trimble Connect. Built for the site management team.

This application gives full control to the site team, so they can manage planning and revisions themselves.

I released the beta version last week.
Based on demand, I have already shared it with 300+ construction and Tekla clients who asked to test it.

I am running two sessions with new updates on 29th July to cover different time zones.

Registration Link

1st session : 6:00 AM AEST (29th July)
9:00 PM UK / 10:00 PM CET / 4:00 PM US Eastern / 1:00 PM US Pacific (28 July)
https://topmate.io/ibimconsulting/2210547

2nd Session : 3:30 PM AEST | 29 July · 11:00 AM India · 1:30 PM Singapore · 7:30 AM Central Europe
https://topmate.io/ibimconsulting/2210560

I will walk through real workflows, the recent improvements, and exactly how this helps your site team and your construction delivery.

If you want to see the full application in action, join me.

Tekla Structure & Structural Designer Users Tekla Structures User's Australia Trimble Inc.

17/07/2026

If you manage steel er****on, you already know this.
The sequence never stays the same.

Sometimes, Rain delays a pour.
Wind shuts down the crane.
Deliveries reach site late.
Now everything you planned has to move.

Here is the problem.
Most site team depend on someone else, or on a tool where everything is manual.
We all know every revision costs time.
And time on site is money.

That is why I built the Sequence Planner inside Trimble Connect.

You manage the sequence yourself.
Weather changes, you adjust it on the spot.
You have complete control because it lives in Trimble Connect.
Everyone on the project sees the same thing.
Site team. Fabricator. Engineer.

I released the beta version two days ago.

The response has been overwhelming, with new requests coming in.
So the beta is free for the first 100 requests, until 14th of August.

Test it, give me your feedback, tell me what else you need.
Based on the feedback so far, We have updated the following requests:
Date range reports, so you know exactly which members go up on which day.
Sequence numbers visible right there in the view.

Comment SEQUENCE and DM me for early access.

https://www.facebook.com/share/v/18AmmE9w1H/

15/07/2026

Who knows the er****on sequence better?
The site team. Or the detailer.
The answer is obvious.

The site team knows better which member goes up first.
They know which sequence saves days.
And which one stalls a crane.

But here is the problem.
The people who know the sequence do not control it.
They mark it up through a third party.
Or manage it manually in another application.
Every revision means double handling.
Every double handling costs time and money.

So we built something different.
Er****on sequencing. Live inside Trimble Connect.
The site team sets the sequence themselves, directly in the model.
Revisions are managed by the site team, not sent back and forth.
No third party apps. No manual rework.
Everything under Trimble Connect.

The result?
Full control sits with the people who hold the knowledge.
The site team becomes independent.
That is the principle.
Sequence knowledge and sequence control should sit in the same hands.

The beta version is ready.
I am opening it to a small group of site teams who want to run it on a live project.
You test it in real conditions. You tell me what breaks.
Your feedback shapes the final release.

If that sounds like your kind of project, send me a DM with the word "Sequence"

Tekla Structure & Structural Designer Users Tekla Structures User's Australia

11/07/2026

Guesswork on site is unprofessional...

If you don't know which assemblies goes first, second, third and so on.

We all know that er****on sequence is one of the most critical parts of construction.

Once Assemblies are delivered to the site, it becomes the site team’s responsibility job to put things up in the right order.

If that order is not crystal-clear, things get messy fast on site.

Here is how this tool inside Tekla solves it:

You can assign sequence numbers to all assemblies with a single click but for better control it is best to work group by group

You can set the direction, the sequence follows

You can assign numbers in your own custom order instead.

Stage and sequence numbers are assigned directly to assembly user defined attributes so everything stays inside the model

Generate a full report straight out of Tekla for the site team

Create an animation so the crew can watch the entire er****on sequence play out before a single piece goes up

Works for both steel and precast detailing projects.

If your site team is still figuring out er****on order through phone calls and guesswork this tool fixes that at the source.

09/07/2026

Lose or gain...

It depends on what you implement in your workflow.

Yes. Firms are not losing work to better detailing companies. But losing it to better automation.

While you are working on the project, IBim clients have already completed with automation tools.

If you want to know how. I am running a live webinar tomorrow 10th July at 1pm AEST.

I will show 24 automation tools running live on a real Tekla model.

Truss built in two clicks with full control
Fly Brace for Truss with purlin cleats added automatically
Truss Splice connecting top and bottom chord with stiffener and galv holes built in
Joining Plate for truss and rafter with galv holes added in seconds
Complete shed modelled with every connection in two clicks
Roof and Wall Cladding generated in under 5 seconds
Flashing Profiles built through the sketch editor
Plus 16 more tools for warehouse and shed detailing shown live on the day.

Er****on sequence inside Trimble Connect will also be presented tomorrow.

If your team is still modelling connections one by one this is the session that shows you what is possible in seconds instead of hours.

Seats are limited.

Registration link : https://topmate.io/ibimconsulting/2185878

27/06/2026

$200 gift voucher who wants it...

But first, a question most Tekla users cannot answer.

How much is manual work actually costing you right now?

Not a guess. The real number.

Here is why nobody knows it:

✅ It never shows up as an expense, so it never gets questioned

✅ It hides inside the week, a few hours at a time

✅ Everyone is too busy doing the work. So, it does not get measured.

✅ That is exactly how a fabricator bleeds tens of thousands a year and never feels the cut.

When I invited my clients to run my ROI calculator, the results were shocking to them.

Most were wasting more than 40 times their tool investment doing things manually.

And One client told me he never realised it and this calculator opened his eyes.

Here is what it shows you in two minutes:

Your true annual cost of manual work

🔓 The savings sitting on the table

🔓 The hours you would reclaim every month

🔓 Your real ROI if you automated it

🔓 The clients who ran it are now keeping that time and money instead of burning it.

Here is the chance to win $200.

Go to https://shop.ibimconsulting.com.au/packages and

Click "Your Time And Cost Savings Calculator."

Run your own numbers and save your results.

Take a snapshot of your result and email it to [email protected].

Every person who enters gets the Master GA Drawing application free. No catch.

And one lucky winner gets a $200 gift voucher.

Open to Tekla users worldwide. Winner will be announced on Monday the 6th of July.

Two minutes. One number. It might be the most expensive thing you have never measured.

Run it now before entries close.

Monday	08:00 - 17:00
Tuesday	08:00 - 17:00
Wednesday	08:00 - 17:00
Thursday	08:00 - 17:00
Friday	08:00 - 17:00

IBIM Consulting

Share

Telephone

Website

Opening Hours

Listing takedown request