04/11/2018
Manual sliding door spare parts!
PAD Automatic Door Ltd. is one of the biggest expert manufacturer of automatic sliding doors and revolving doors. We have been in this business for years.
Automaic sliding door and revolving door make people's life more convenient!
04/11/2018
Manual sliding door spare parts!
Manual sliding door, after you open it, it shall return automatically! It is often used in domestic place.
3-layer telescopic door
08/06/2018
PAD show room is under construction, Here are the designs of it! Welcome to comment on it! If you have any good idea of our show room, just feel free to tell me! If at last we use your idea, we will provide you gift-- one set or more automatic door operator for free!
06/06/2018
https://www.youtube.com/watch?v=f_wCiP8AVao&t=177s
PAD1000 automatic sliding door operator installation video
PAD1000 automatic sliding door operator installation video You can see how it is composed and if you are interested in it, contact me! my wechat: roly55555 my skype: rolybest my facebook: paddoor
06/06/2018
https://www.youtube.com/watch?v=NNX0YjLyw1I&feature=youtu.be
PE18C automatic sliding door operator installation You can see how this device is composed of. Welcome to inquiry from us! my wechat: roly55555 skype: rolybest email: [email protected]
06/06/2018
https://www.youtube.com/watch?v=XH02VpARqBY&feature=youtu.be
PAD2008 automatic sliding door operator installation video PAD2008 automatic sliding door operator
26/05/2018
PAD HEAVY DUTY AUTOMATIC SLIDING DOOR!
12/05/2018
BURN-IN TEST
what is "burn-in test"?
It means that: We provide the control PCB boards some abominable envoroments connected with heating and electricity, making their inner potential problems exposed quickly, and then we test its electrical parameters and choose the bad control boards out!
All PAD control PCB board will be tested for 72 hours and choose the good-quality one out. Every Control PCB board will be tested with 4 steps:
1 check its current, it shall be under 220V, and the current shall be 0.02A in the machine, and the light should be flash once every second.
2 Bult-in test.
3 before assembled, test it on the machine to check whether it works with the capacity 154KG/leaf or not.
4 after assembled, re-check it again with the capacity 154KG/leaf again.
All these 4 steps are just for the check on production. After all is prepared, our quality control staff shall check all the goods again.