DDT Rc Racing

DDT Rc Racing Rc Racing reports and product reviews. Vlogs and pics.

The outdoor season is coming to an end!A few pics from last weekends nitro endurance race in Skarpnäck, Stockholm. A fun...
05/10/2026

The outdoor season is coming to an end!

A few pics from last weekends nitro endurance race in Skarpnäck, Stockholm. A fun race with a few bonus challenges - suddenly driving the track backwards or co-driving with a team mate. I had a lot of fun at this even though my own performance met an all time low. Good friends, great food and a lot of track time.

See you all at next years endurance race!

28/09/2026

Talented driver and local hero Fredrik Peters takes us around the offroad in Skarpnäck, Sweden. A track with loads of different features, grip levels and jump sections. The surface is a mix of dirt and astro turf.

27/09/2026

Full mayhem at the 6-hour-endurance race in Skarpnäck, Sweden. 5 teams with 3-5 drivers in each team. Super fun to end the summer season with a slightly different race format!

Last race of the year!6-hour team endurance race in Skarpnäck!
27/09/2026

Last race of the year!
6-hour team endurance race in Skarpnäck!

Winner of The Swedish Superbike Cup in 2026!I did my first RC car race back in 2003 and have loved it ever since. I also...
24/09/2026

Winner of The Swedish Superbike Cup in 2026!

I did my first RC car race back in 2003 and have loved it ever since. I also raced with FPV Drones and competed at the highest level with 3D helicopters. What I enjoy the most is the learning process. And earlier this year I felt like a new challenge would be fun so I got myself an RC Bike – something completely new and nothing like cars.

Let me summarize my experience from the first season racing Rc Bikes with all its pros and cons.

The driving
Driving an RC Bike is really fun. Smooth stick inputs is the key to going fast. The biggest difference to a car, besides the fact the you control the lean angle to turn and not the wheel, is that you can’t brake very hard. The stopping distance is twice as long. And it’s the same with acceleration – too fast with too much power makes the bike wheelie and flip over. The upside with this is that the bikes goes with great flow around the tracks and this creates great racing. No one brakes in front of you; no one turns in on you or smashes into your rear end. Of course, there is race incidents – but nowhere close to car racing.

The Cost
The initial cost is quite high due to the non-existing secondhand market. There is also no entry level bikes – two big brands which both are premium. And since you can run cheap electronics, and rarely break any parts, the running cost is very low. A set of new tires for each race is all you need – the tires then last for the practice days until next race.

The weather
One of the biggest upsides with bikes is that the weather is not a factor. Warm, cold, windy or rain – we drive not matter what. And the bikes works just fine. Running a nitro buggy in a rain race is stressful and requires loads of hours for cleaning afterwards. And on-road classes are not very fun due to the total lack of grip. When running rc bikes you don’t really care to check the weather forecast ahead of a race – of course there can be more or less challenging weather but the race will always be run to the end and you will be able to drive and have fun.

The complexity
This is the biggest downside of Rc Bikes. And I don’t mean the actual design of the bikes – it’s the total lack of available information. There is no reviews, build videos or set up tips on YouTube. No guides how to trouble shoot a problematic bike. The only written information I have been able to find regarding setups is 10-year-old pdf document. Which was translated from German to English. I have also studied some old post in forums trying to get a better understanding of how to maximize the setup. Of course, you can ask your fellow friends but the answers are often of big variety so the best way is to test, learn and draw your own conclusions.

Race format and run time
If you want a lot of track time, bikes is a perfect choice. 10 minutes heats in practice and qualification and 3 x 15 minutes finals. And during practice days you can go 15-20 minutes each stint and if you bring 2-3 batteries you can basically drive nonstop. And the race format is really relaxed (at least in Sweden). We run 4 qualification heats with your top 3 laps counted each time. So, this gives you room to try setups, different tires and ways to drive. At some point I even walked down from the rostrum to do some adjustments to the bike and then went back up again and continued the qualification heat. It’s also a great challenge to first aim for pure speed in qualification and the bring out consistency in the finals.

The wrenching time
Since 1:8 nitro offroad been my main class the past years I am getting slightly out of motivation when it comes to all the hours needed to prepare, clean and maintain the car. It is at least 6-8 hours before each race for maintenance work of the car, gluing tires, clutch work etc. With the bikes you rebuild and put new oil in one shock, one steering damper and the forks. Maybe you will replace a couple of bearings, a belt and the steering shaft. The tires comes pre-glued. Maximum 30 minutes of work ahead of each race. So, the time required between the track days is very low.

The community
The number of bike drives is low compared to participants in rc car races. But the small group of enthusiasts is very helpful and friendly. I specially want to give Mikael Bredberg a shout out – without all his help in the beginning I am not sure I would have the energy to push thru the initial learning phase. And also, a big thanks to Karl Helgen who has been my partner in crime the entire season!

Win at the season final in Norrköping!Fun track, great people and tricky conditions with ever changing weather condition...
20/09/2026

Win at the season final in Norrköping!

Fun track, great people and tricky conditions with ever changing weather conditions. Dry track mixed with sunshine and rain showers. I did better this time with setup changes and managed to win 3 of 3 finals. Great fun!

08/09/2026

It doesn’t matter what form of racing we are talking about - the start and first lap is very crucial. In this clip we see Hampus Broman with high pace first lap at the Large Scale nationals in Eskilstuna, Sweden. He gets a gap to the rest of the field already after a few corners. Interesting race with a rain shower 10 minutes in forcing the drivers to go to the pit for a change to rain tires. Congrats to Hampus for your win a national title!

06/09/2026

Do you prefer stick transmitter for your RC car? Or the more popular version with wheel and trigger? Its hard to say that one style is better then the other and no one can really say that of them got a clear advantage. Wheel and trigger is the more common - but some of the best drivers in the world (like Davide Ongaro) uses stick transmitter. Which do you prefer? And why?

2nd place at this weekends RC Bike race in Eskilstuna!Its was very tricky conditions with weather constantly changing. W...
01/09/2026

2nd place at this weekends RC Bike race in Eskilstuna!

Its was very tricky conditions with weather constantly changing. Wet track, dry track and rain mixed with sunshine. The grip level was never the same and finding a fast setup without sacrificing consistency was super hard.

The hardest part was to set the right length on the crash bars (they determine the max lean angle). Too short and you crash every lap and too long just makes ju slow.

Since this was my first time racing bikes in conditions like this I took a conservative approach with the crash bars. Wrong choice can make you go from hero to zero in no time.

Going 2-2-1 in the finals gave me a 2nd place overall. I am a little bummed that I did had more guts to aim for speed over consistency but still happy with what I learned over the weekend. Bike was great and I did my best in these conditions. A few seconds behind the winner in final 1 and 2 is still not far from succés.

I gained a lot of experience and had a great time with my friends!

Congrats Mattias Elmerfors for the win and Mikael Bredberg for 3rd.

28/08/2026

1:8 scale pan cars has been the F1 class of RC cars since the 1970´s. The fastest and most advanced cars for the most talented, and dedicated, drivers. And the cars have been powered by 3.5cc nitro engines since the beginning. Nowadays the engines produces roughly 3hp and 40 000 rpm and the cars reaches speeds up to 130 km/h. Finetuning the engines to find a balance between power and run time has always been a big part of being successful. About 10 years ago the first electric versions was introduced. And on paper they should be outperforming the nitro cars – more power, less tuning, less maintenance, cheaper and easier to setup. But somehow the electric class has never been a success. While nitro´s still attracts large number of drivers to go to races, the electric cars only attracts a few drivers at club level. How come? We are living in a age where real cars are transitioning into electricity. And we see the same trend in full scale motorsports – fuel as a source of power is till superior to electricity. Or is it the sound, the smell and feeling of a real engine that’s makes the experience of motor sports so sensational? What do you think?

Adress

Stockholm

Webbplats

Aviseringar

Bli först med att veta: vi skickar ett mejl när DDT Rc Racing publicerar nyheter och kampanjer. Din e-postadress används inte till något annat, och du kan avsluta prenumerationen när som helst.

Genvägar

Dela