Pat Norris Archery

Sig Sauer Stabilizing binoculars ready to ship to you. Stops vibration for clearer views of animals or targets.

SIG SAUER ZULU 6 HDX PRO STABILIZING BINOCULAR 16X42 or 20X42 The most advanced optical image stabilization solution with a lifetime warrantee and ECONO SHIPPING. This set is for 16X42 or 20X42 Pat is now shooting archery and seeing where his arrows are in the target with the Zulu 6 PRO 16X50 Sig Sauer Stabilizing Binocular and he loves them. BOWHUNTERS now yo...

Have you tried the Get Level System that screws into the stabilizer bushing and also the arrow rest hole..
I just got another batch in stock! https://patnorrisarchery.com/products/get-level-threaded-5-16x24-for-bows?_pos=1&_psq=get&_ss=e&_v=1.0

REDDING was a fun shoot seeing many old friends and making some new ones. My booth stayed pretty busy and the archers liked my new PNA Pin nocks that sell for $12.88 a dozen. Couple that with my new PNA Pin Nock INSTALL/REMOVAL TOOL for 7.88 and you have a winning combination. For more info or to purchase go to my website Patnorrisarchery.com

I started carrying these threaded level bubbles to help set your bow in a bow vise absolutely veritical so that you can level your sight level and set your second and third axis on your sight.
The are imported but seem to checkout with good quality. $44.50 for a set of two.

Get level threaded 5/16X24 bubble for bows Imported threaded levels for Stabilizer hole and arrow rest hole. Two levels per package. Simple way to level your bow to the vertical position for setting sight axis' while you have your bow in a bow vise. Sets riser and bow string at the same time. To get a bow vise click link In stock and shipped...

A picture from out of the past. I know who he is, how many of you know who this archer is....

Carbon Arrow TRYOUT TESTING Kit Please see picture below.
Carbon Arrow TEST kit 4 arrow shafts your choice of two spines.

For Trad or Compound. Featuring Pat Norris Signature Series Carbon Arrow Shafts.

Most archers start looking at the arrow selection charts, usually coming up with two sizes of Carbon arrows that may fit their set up. Different Archers will shoot different spine arrows from the same bow weight and arrow length. To help you decide I have a selection package.

To save you time and money I have designed a COMPLETE arrow and point try out kit.

This package can be 300-350 spine, 350- 400 spine, 400-500 spine, 500-600 spine, 600-700 spine. Changing point weight helps to fine tune the spine of the shaft. Cutting to different length also helps to fine tune your shaft.

As an example: One kit is explained below.

I'll sell you 4 0.245 Pat Norris Signature Series Carbon shafts 2 ea, 500 spine and 2 ea, 600 spine with SWAPT 8/32 threads inserts (12 grains) and 2, 85 grain 2, 100 grain and 2, 120 grain HARDENED TOOL STEEL screw in points. You can experiment and find the correct length and point weight the best combination for your form and set up. Once you have determined your perfect set up then you can purchase just that size carbon shafts and SWAPT screw in points in the weight you want.

All my shafts come with PIN INSERTS AND my PNA PIN H NOCKS included no extra charge!

Complete Kit for $52.50 with FREE shipping

Do you have access to a cut off saw for cutting arrows to length? If not, I can custom cut them to length for $.75 per shaft. If you need a fletching tool I recommend the Goat Tuff Fletcher – economical and does a perfect fletch. Click for the Goat Tuff fletcher

It must be the month for the Micro Adjust Springy arrow rest.
Here are 105 going to one of my distributors 08-11-2025. You can get yours from your local Archery Shop from Hawaii to Maine or they are available from Pat Norris Archery, 3 Rivers Archery, Lancaster Archery, and Archery Supplies of Australia.
Complete with Instructions

FINALLY, the last piece of Pat's X-Factor 44 inch axle to axle bow has now been finished. I now have 3 sizes of Eccentric Wheels to cover draw lengths from 24 to 32 inches. The wheels are now scribed to make module adjustments easier to set. The Modules draw stops have been lengthened and flattened to make a solid back wall. The axles fit through sealed ball bearings.
For those of you that have a bow on order I am now fully in work mode to get your bow to you. Thank you for your patience while the final parts of the puzzle have be made right here in the USA.
for more information call me at 530-362-0423

Good News if you are looking at a bow press. I finally got the Howard "LEGACY" press I have been using for the last couple of years up on the website. Please take a look.

BOWPRESS and accessories, Tools Pat Norris, the owner, has a wonderful reputation in the archery industry.