Schreibeis Built

A rig we recently built. Tons of routing options, limitless tones. Theres a fair amount to unpack on this one so we'll roll out more info a board at a time.

The Nerdy Stuff:

-Both boards are controlled via an Mastermind GT/16 on a third board (not shown) 

-When used in combination this rig allowes for wet/dry/wet routing. A mixture of direct signal via the Tone King Imperial preamp and live amplifiers. These could also be configured for other setup and signal routing types

-Effects routing handled via (2) RJM MEGX units. One on each board.

- compatt/x ISOPlus Splitter to assist in routing between the boards and multiple amps quietly and efficiently 

-Built on (2) aero series boards complete with Creation music risers. The risers have been modified for some extra clearance below. 

-Custom Schreibeis Built routing boxes allow these board to be used together or independently if needed. These route all the inputs, outputs, MIDI and linking cables to convient locations on the rear of the boards. As well as providing phantom power to The RJM Mastermind GT controller via a built in Phantom power injector. 

-All powered via PSUs

- cabling, squareplug, connectors

More specific details on each board soon!

Want to build your own dream rig??
Get a quote and Get Built:
Www.schreibeisbuilt.com

Under the hood of a recent build.

Plenty of power thanks to multiple
Power supplies.

TRS MIDI control also with the assist from Strymon

canvas on Acoustic DI duty

Custom routing interface to handle AC power, selectable dual guitar inputs, dual amp outputs, XLR MIDI in, Preamp DI output.

More info soon!

www.schreibeisbuilt.com

We've been very busy.

www.schreibeisbuilt.com.

TRS to dual mono splitter/merger interface for our most recent build.

Get Built
www.schreibeisbuilt.com

Recent build we did for a local Client.

The Nerdy Stuff:
-Built on a x tour compact board and riser combo.

-Powered via Zuma power supply

-The brains of the operation, G3 Atom, handles looping and preset duties

- Custom routing interface to make I/O and powering the board a breeze. The interface not only routes the audio to an easy to reach place on the back of the board, it also allows the client to power everything from a single, locking AC cable that powers not the Zuma and memory man delay.

- and cable paired with and btpa connectors for solid, reliable connections

What to have your rig built?
Contact us!
www.schreibeisbuilt.com

Send // Return

Get Built
www.schreibeisbuilt.com

Quick small but mighty bass flyrig we recently did recently. Complete with lots of I/O in a small footprint

The Nerdy Stuff:
-Built on a Board nano. This rig fits in a Tick 2.0 for easy carry on luggage.

-Rolls personal monitor amp to allow for in ear mixes as well as bass monitoring.

-Custom Built I/O for all board connections including Bass Input / Headphone out / XLR Monitor L/R Inputs / Bass DI out / and AC power in.

- Everythjng is power via the Preamp

-We also included dual USB ports on the back of the board for usb powered lights to light up the board, setlist, ect.

-Not pictured is a dual loom we built to have allow the headphone mix and input cable to be consolidated into a single tidy unit.

Make you fly gig easier and Get Built!
www.schreibeisbuilt.com

Routing solution from a recent fly board we built.

Sometimes you have to fit a lot in limited amount of space. This was one of those times.
More soon!

Get Built
www.schreibeisbuilt.com