Fox Fire Factory

V2 ATL’s/Foxhole- these are different from V1 Fox holes primarily in that the have a smaller cutout (slot). I did not plan on making ATL’s with cutouts because the extra milling for tap relief already reduces weight and makes the liners less stable with cutouts. I went back to the drawing board and redesigned my best selling liner design FOXHOLE and reducing the size addressed both my concerns. These weigh a little less than 1.2 oz which is right about where V1’s weighed. They are lighter than solid ATL’s which are about 1.4 oz per set.
And of course my original multi platform liners offer the ability to use Krakens with recommended hardware(CEPHALOMOD, Fox Fire original concept).

Made to order - just hit me up.

V2- RINGERS- these ringers are exactly like TINGERS in that they are thin spacers that only work with “FLOATIES” ( one set of four included). V1 RINGERS were thicc kit style that required thick kit hardware to work. Although I am a very big fan of thicc kits as the make it easier to get your Rep to not tap, I no longer sell them as kits with the appropriate hardware and I think that confuses people, so I made it easier. You ca use v2 ringers (just like tingers) using standard Rep hardware on reps. I recommend using them with my ATL liners but standard setups will work.

If you don’t have ATL’s and want to use Ringers or Tingers on a thick kit, you can purchase an additional set of Floaties from me and stack them! Yes you can use two sets of Floaties stacked and swap out standard hardware to thicc kit hardware and you now have a very acoustic thicc kit!

Krakens on my Cephalomod only work on thicc kits.

As always thanks for the support .
Let’s build something beautiful together. 🦊🔥

These are grade 5 Titanium channel bits housed in a CF polymer sandwhich block.
These are the first of its kind, another FFF original concept! The idea is to make more affordable options and to make other platform blocks that will accept these zingers. This Listing is for Rep or Cephalomod only.

Runs on Thicc kit:
Recommended hardware is .188” long shoulder pins for Rep or .312” length dowel pins (.125” thickness)for Cephalomod(krakens) and .030” washers.
Hardware not included(Available @ thetruelink.com

Slide 1:Cephalomod ATL-solid liners with milling to increase the space between liners and “steel”. This creates a space that channel spacers can “float” in to create that tuning fork type vibration/sound.

Slide 2 : shown with V4 titanium channel spacers
Slide 3: Kraken with aluminum half channels (thicc kit style).
Slide 4: Stock scorpion tip tanto with aluminum half channel .

I had a lot of fun with this one. This is a complete Custom AB. Alt AB is old, 2017-2018.

Weighs 4.4 oz . Ti slabs with milling for tap relief and weight reductions. Has custom CF half floating half channels. It also has the zen location for Reps (needs thicc kit zens and washers).

Rep Aluminum Rep scales, flippers finish.
Link to my shop in my bio. You can buy direct with in USA $65 shipped conus or listed through Etsy for international and or other payment options through Etsy. I can make other designs, what other designs would be cool as aluminum scales?

Have you ever wanted to try modding your Kraken but didn’t know where to start? Do you have extra Rep scales laying around? This is for you. Cephalomod Kits come with titanium liners , a set of dowel pins(zen pins for kraken) a set of thicc washers and some PLA spacers to get you started.
Add your surplus Rep scales and and Live Kraken( trainer tip hits spacers).

I had surplus ti liners that I was asked to make for Reps that had little gap or would handle slap. Install the included zen pins on the top zen pin hole and use Rep scales to build yourself a G10 kraken using your favorite Rep scales!

I really want to see more Cephalomod builds so LETS GO!

This is gauging interest to see if I should offer kits. I am giving the hardware away for free and including printed spacers.

*kit does not include pivots or spacer hardware.

“Let’s build something beautiful together!”
FFF

Link in bio

New Cephalomod liner design!
I’m sure you can tell what this was inspired by.

I’m calling this one design Classic as it’s my take on the designs we all know and love.

The Kraken has three of the blade shapes that match up nicely and the Cephalomod liners will of course take Rep blades as well.

This design was modeled to pair up well with my Foxhole slotted scales but I Can’t wait to see what you build with them.

Weight is about 1.4 oz a set and this build in the video ended up weighing 4 oz on that configuration .

I’m working on a few sets. Direct orders take priority and I’ll list any at my Etsy if I need to.
Will also take orders for Ti Foxhole scales. Made to order.

Let’s build something beautiful together.

Custom Build -current weight is 4.3+oz with slight handle bias

Parts used:
* modded V2 channel Reaper blade fitted to Rep handles with a bushing swap to accept 3/16” standard pivots .312” length.
* standard Rep Zen pins
*.020” washers , .312” length spacer barrels , ..156” length shoulder pins (aka zen pins)
*KitSune liners with added blade clearance milling
*custom KitSune scales with added undermilling for weight reduction.
*FFF V4 titanium channel spacers ( might ply around with different spacer configurations.

*All hardware besides bushings are from .truelink

*bushings are from

Built for me but open to offers.

Custom V2 Xolo chandwich build.
Parts used:
*modded v2 Xolo blade fitted to Rep platform. Bushing swap to accept 3/16” pivots. .020” washers
* Toltec liners to mimic the Xolo milling
* .fire.factory custom Foxhole liners
* .fire.factory V4 ti channel spacers
The pivots and spacer barrels are .312” length

This build ended up weighing 4 oz and has a neutral balance and has a very unique sound to it. It’s a “one off “ and will most likely never build another like it.
I just wanted to share and document this one here. I’ve been wanting to do something like this for a long time and recently the stars aligned to make it happen! A special thanks to Black for helping me make this happen.

Check it out! I’ve made some custom washers to make floating Neo Spacers. Why Neo spacers? Well I want to make cross platform mods more accessible to YOU! Some blades for example tanto kraken and kraken trainer blades will hit Rep platform spacers. On Bowie blades you can just use thicc Rep spacers (need to be thicc kit to work on Cephalomod) but not on straight spine blades. You can also use V1 Galvanis blades Nabalis Hydra blades and with bushing swap… you can even use V2 Da Purge and V2 Rebola blades( new sand which blades should also work with its own hardware accommodations).

I’ve recently started making floating half channel spacers that will become more available moving forward. These floating spacers are only for Neo /Cephalomod system. That’s because instead of making one for Rep and different ones for other platforms I just wanted to simplify it. They will NOT work on Rep scales unless they are modded or yiu can get to make you some with the bottom hole cut out to accommodate 3/16” hardware at bottom, he has done it for some before. There was someone else trying to make 3d printed scales for Cephalomod but they gave up on the project. I can and will be making titanium Cephalomod scales in some of my designs .

If you have not seen or heard the floating half channel spacers before look out for upcoming post. They have a very unique sound . I’ve made and sold a handful but I plan on making titanium ones moving forward.
Thanks for reading this long ass post lol and as always thank you so much for fueling my ingenuity and creativity!

Let’s build something beautiful TOGETHER! 🦊🔥