Recoil Rider Revolver Grips

Recoil Rider Revolver Grips Revolver grips made for EDC. Carry snag-free without the recoil. Veteran owned. Made in Alabama, USA.

Customer Spotlight: Fellow wheelgunner Gabriel tried Recoil Riders and sent us this feedback: "Took me about 30 seconds ...
09/08/2026

Customer Spotlight: Fellow wheelgunner Gabriel tried Recoil Riders and sent us this feedback: "Took me about 30 seconds to install on a Ta**us 605. If you shoot 357, these grips are basically a necessity. For me, its non negotiable. I wouldn't use any other grips. They're not magic- but IMO they cut down felt recoil about 15%, easily."

Much appreciated, Gabriel.
---
https://recoilrider.com/products/ccw-grips-for-taurus-856



Best regards,
David
Owner, Recoil Rider

Customer Spotlight: Fellow wheelgunner Daniel tried Recoil Riders and sent us this feedback: "Put these on my new LCR 9m...
09/08/2026

Customer Spotlight: Fellow wheelgunner Daniel tried Recoil Riders and sent us this feedback: "Put these on my new LCR 9mm. The OE R***r grip only allowed a two finger hold. Having shot the weapon before purchasing, I was aware I needed a three finger grip for the “snappy” 9mm. Others offered such but, either with a rubbery feel or a straight, longer backing. All of which are not pluses fir pocket carry. These CCW grips are designed with an angle allowing for three fingers while not lengthening the overall grip. Really ingenious as the weapon is covered by the holster while giving me full grip to retrieve it while being fully concealed in the pocket. The material is such that it slides out of the holster with no hang up(like a soft rubber does) and is cushioned on the palm for taming that 9mm snap. I have to say this is the grip for the LCR 9mm, addressing all needs."

Much appreciated, Daniel.
---
https://recoilrider.com/products/ccw-grips-for-ruger-lcr-and-lcrx



Best regards,
David
Owner, Recoil Rider

Customer Spotlight: Fellow wheelgunner Steven tried Recoil Riders and sent us this feedback: "I’m glad I stumbled across...
09/07/2026

Customer Spotlight: Fellow wheelgunner Steven tried Recoil Riders and sent us this feedback: "I’m glad I stumbled across Recoil Rider. Outfitted two LCRs. One with the boot and one with the CCW grip. Marked improvement over the factory Hogue grips in both form and concealability. Less tacky and just “feel” better in the hand. My next purchase will be a CCW grip for a SP101."

Much appreciated, Steven.
---
https://recoilrider.com/products/ruger-lcr-and-lcrx-boot-grips



Best regards,
David
Owner, Recoil Rider

Customer Spotlight: Fellow wheelgunner Humberto tried Recoil Riders and sent us this feedback: "I bought the ryder grip ...
09/06/2026

Customer Spotlight: Fellow wheelgunner Humberto tried Recoil Riders and sent us this feedback: "I bought the ryder grip for my 442 hoping that it would do the job & the name of the company goes a long way with the product, it really makes the shooting of 38spl +p comfortable"

Much appreciated, Humberto.
---
https://recoilrider.com



Best regards,
David
Owner, Recoil Rider

Customer Spotlight: Fellow wheelgunner michael tried Recoil Riders and sent us this feedback: "Awesome grip, it definite...
09/05/2026

Customer Spotlight: Fellow wheelgunner michael tried Recoil Riders and sent us this feedback: "Awesome grip, it definitely changed grip angle for my Kimber K6xs, should be standard factory grip for Kimber"

Much appreciated, michael.
---
https://recoilrider.com/products/ccw-grips-for-kimber-k6xs



Best regards,
David
Owner, Recoil Rider

Customer Spotlight: Fellow wheelgunner Charlie tried Recoil Riders and sent us this feedback: "So about these grips (j f...
09/03/2026

Customer Spotlight: Fellow wheelgunner Charlie tried Recoil Riders and sent us this feedback: "So about these grips (j frame boot)
Are they the prettiest grips you can buy? No. (Though I dig how they look) They do however do what they say they will do. They make shooting full house loads out of a 640 Smith possible; recoil is still stout there is no getting around that with 357 mag in a snub nose. However they do allow for rapid fire and quick follow up shots. I would compare the recoil close to 2.5 inch gp100 or a 2.5 inch 686. Out of a small j frame that's pretty damn good. The thing I like most though is the slight change in grip angle. This allows (for me at least) to find my front sight faster and makes it have a more natural point of aim.
Installation: easy just watch the YouTube video
My only complaint about these grips is that I want them for a k frame so I hope those are in production
All in all damn good grips good price been super happy with them"

Much appreciated, Charlie.
---
https://recoilrider.com/products/s-w-j-frame-boot-grips



Best regards,
David
Owner, Recoil Rider

Customer Spotlight: Fellow wheelgunner Edward tried Recoil Riders and sent us this feedback: "I just bought a new SDR-A ...
09/03/2026

Customer Spotlight: Fellow wheelgunner Edward tried Recoil Riders and sent us this feedback: "I just bought a new SDR-A and wanted to upgrade the stock grips so it wouldn't stick to my skin. Everyone recommended Recoil Rider grips so I figured I'd try them out...and they were right! Perfect grip angle, doesn't stick to my skin at all, and eats recoil like a champ. If you have an SDR or SDR-A you need to get them!"

Much appreciated, Edward.
---
https://recoilrider.com/products/diamondback-sdr-ccw-grips



Best regards,
David
Owner, Recoil Rider

Customer Spotlight: Fellow wheelgunner RS83 tried Recoil Riders and sent us this feedback: "Worth it. I’ve purchased mul...
09/02/2026

Customer Spotlight: Fellow wheelgunner RS83 tried Recoil Riders and sent us this feedback: "Worth it. I’ve purchased multiple grips for my UC 442. This one is hands down the best for recoil management and it makes shooting 50 rounds with a snubby as close to pleasant as you can get. Fits amazing in my front pocket and point of aim is a definite upgrade. Just wish we had a few other color options 😂"

Much appreciated, RS83.
---
https://recoilrider.com/products/s-w-j-frame-boot-grips



Best regards,
David
Owner, Recoil Rider

Customer Spotlight: Fellow wheelgunner Adam tried Recoil Riders and sent us this feedback: "I ordered these by mistake, ...
08/20/2026

Customer Spotlight: Fellow wheelgunner Adam tried Recoil Riders and sent us this feedback: "I ordered these by mistake, thinking I was ordering the boot grips. I’m glad I did, because the extra little bit of grip you get for the pinky is perfect. The cushion of the grips is money. The recoil is still there, but the uncomfortable sting that snubbies deliver is gone. I’m outfitting the rest of my snubbies with these grips. The added length doesn’t inhibit pocket carry and the grips don’t grab or cling to the inside of the pocket."

Much appreciated, Adam.
---
https://recoilrider.com/products/ccw-grips-for-smith-wesson-j-frame



Best regards,
David
Owner, Recoil Rider

Address

Prattville, AL

Website

Alerts

Be the first to know and let us send you an email when Recoil Rider Revolver Grips posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Recoil Rider Revolver Grips:

Shortcuts

Share

Category