Beaton Firearms

Directions Website Contact the business

Beaton Firearms Beaton Firearms is an established Perth, Western Australia based family business.

Unfortunately, We're going to be closed until Monday the 26th of October. We hope everyone has a fun weekend!
22/10/2026

Unfortunately, We're going to be closed until Monday the 26th of October. We hope everyone has a fun weekend!

Bill's old Bridgeport mill is 75 years old or more, and the adjustable tapered wedge that takes the movement out of the ...
22/10/2026

Bill's old Bridgeport mill is 75 years old or more, and the adjustable tapered wedge that takes the movement out of the cross slide had bottomed out of adjustment.
You would have seen the plate Zaine was surface grinding last week? Well that plate is now fitted and is doing its job perfectly. No more wobbly bed.

09/10/2026

We've been a bit quiet on here lately.
Sorry about that. We'll try and let you know what's been going on sometime.

In the mean time, here's a tapered wedge we are surface grinding. This surface grinder let's us make lots of cool stuff.

A client brought this Wi******er pump action sh***un to us - unfortunately it had a bulge in the barrel. Not wanting to ...
21/08/2026

A client brought this Wi******er pump action sh***un to us - unfortunately it had a bulge in the barrel. Not wanting to go through the onerous process of getting a replacement, they asked us if we could source a replacement barrel. We asked around and no one had a barrel to suit that they would sell, so the only other option is to make a barrel fit.

Bill was able to machine up an adaptor so an Adler barrel could be fitted into the Wi******er breach block that contains the locking lugs. Once timed so the Headspace is correct and the mag tube lug is in the right position, he's machined the recesses for the extractors and now it's time to test fire it.

Tikka T3x ri**es in magnum calibers have relitively short magazines. This r***e was in 300 Win Mag, but Bill converted i...
07/08/2026

Tikka T3x ri**es in magnum calibers have relitively short magazines. This r***e was in 300 Win Mag, but Bill converted it to 300PRC.
TSE barrel with a 1/8" twist means it will handle even the javelin shaped Hornady ELDM 250gr.
300PRC factory ammo will fit in the mag, but you can't eject a loaded round. Bill carefully opened up the ejection port without removing any material from the locking area.

Some graphite black by Rohan, our Cerakote guy, and it's heading out to Kal to belt some camels.

Congrats to Aaron for Winning the Nocpix Lumi BinosThanks for everyone who came to the Nocpix night and had a gander at ...
23/07/2026

Congrats to Aaron for Winning the Nocpix Lumi Binos

Thanks for everyone who came to the Nocpix night and had a gander at some of these awesome optics. Now our display is up and running everyone can come through and see just how impressive these thermal optics are and why they are dramatically improving the success of hunters across the state.

Got the new Nocpix cabinet set up.Will be announcing the winner of the thermal binos tomorrow, so keep your eyes peeled!
22/07/2026

Got the new Nocpix cabinet set up.

Will be announcing the winner of the thermal binos tomorrow, so keep your eyes peeled!

Stolle Actions -Panda F Class actions are a single shot aluminium action with a steel insert for the barrel thread and l...
20/07/2026

Stolle Actions -

Panda F Class actions are a single shot aluminium action with a steel insert for the barrel thread and locking lug area. With a big square bottom, the aluminium body adds to the rigidity of the action while keeping the weight down. Available in right hand or left hand, with right port; left port; dual port and mini port, to suit nearly any caliber.
The Atlas Tactical is Stolle's R700 clone, but with lots of extra features. Now with a one piece bolt and handle too, for extra strength. Double pinned recoil lugs, for those doing switch barrels and wanting the lug to not bind. A full 3.85" magazine cut-out in long action, for those seating their projectiles right out. Awesome actions for the competition shooter or the hunter

Bit of a debate between smith's this week - do you chamber and thread, or thread and then chamber?Which way you do it se...
12/07/2026

Bit of a debate between smith's this week - do you chamber and thread, or thread and then chamber?

Which way you do it seems to be determined by -
1. What tooling and measuring equipment you like to use
2. What processes you follow
3. How you were taught to fit barrels
4. What feels most comfortable

The proof of the pudding is always in the eating - the outcome is what's important.

Personally, I prefer to chamber first and then set the tennon length and thread. If it's a tricky one, or something I'm not familiar with, I leave the shoulder length short and then slowly trim the shoulder back until the Headspace comes into spec. I can do this precisely with my digital readout.

Training applicants for Corporate Licenses is part of what we do.On Tuesday the 30th of June we trained 10 people from C...
02/07/2026

Training applicants for Corporate Licenses is part of what we do.

On Tuesday the 30th of June we trained 10 people from CBH to safely and ethically use fi****ms for grain protection. Our tailored courses provide comprehensive, relevant information and includes live fire coaching in fi***rm marksmanship.

Tuesday was a bit wet and wild, but these trainees passed with flying colours. Thanks again to WARA Pinjar for allowing us to hire their facilities.

Address

Sampson Street
Maddington, WA
6109

Opening Hours

Monday 9am - 5:30pm
Tuesday 9am - 5:30pm
Wednesday 9am - 5:30pm
Thursday 9am - 5:30pm
Friday 9am - 5:30pm
Saturday 9am - 5:30pm

Website

Alerts

Be the first to know and let us send you an email when Beaton Firearms posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Beaton Firearms:

Shortcuts

Share

Category