Lachlan O'Hara Racing

!!HERE IT IS !!🏎️👑

Our new racecar is finally here. for all of you who guessed it. It's a Nissan Silvia s13 running a brand new fully built SR20 engine.

This car is going to undertake a complete makeover. From inside to out. By the time we are done it's not even going to be recognisable.

Stay tuned as we build this weapon over 2023. To get it ready for Sports sedans for 2024. It's going to be wild journey 💣🏁🏁

🫢NEW RACECAR ALERT...🤫

Can you figure out which car this engine bay belongs to?🙈

Stay tuned to find out😉📺

Well that's a wrap for us in the RX8 Cup Series.

We couldn't wrap up though without thanking all of our sponsors and partners over the last 4-5 years, without all of your support, we wouldn't have made half the races we did.

Of all those who have helped, we'd like to especially thank OccSafe Australia Pty Ltd. Mal and Amy have been by our sides over the past 4 years, ensuring we were always able to get on track. Mal and Amy try to make it to as many races as they could in support of Lachlan, often jumping on tools, shouting coffees, grabbing fuel and the list goes on.

We can't thank you enough for your support, encouragement, generosity and most importantly friendship. We know we'll stay in touch regardless, but sincerely, Thank you.

Lachlan, Scott and Ang.

The time has come for us to move on from our RX8 Cup Car.

For sale is our 2004 Mazda RX8 Cup Car. This car is a regular in the top 5 on track with multiple podiums, but due to a lack of time to race it is time to move it on. It meets all current specs and is ready to roll straight onto the track and go racing for the remainder of the 2022 season or take some time and make it your own, ready for 2023

Included:
• Motorsport Australia Log Booked
• Engine: Engine was replaced last year and has only done 1 race meet since install. The engine has high compression (around 100 on both rotors) and is very punchy. Starts hot and cold
• AGI National Roll Cage
• Cold Air Intake
• Ryan Rotary Coil Pack and MSD Leads
• All RX8 Control Items fitted
• New front lower control arms with new upper and lower offset bushes
• All sound deadening removed
• Sparco Race Seat
• Schroth 6 point Enduro Race Harness
• Window Net
• NACA Duct
• Front Brake ducting/cooling
• 1 Race meet old brake pads
• New Fuel pump
• New spark plugs (1 race meet)
• 1 x set black control rims
• 1 x set Gunmetal grey control rims
• 8 x Nankang AR1’s
• Second fuel pump to prevent fuel surge
• LED rain light
• 2nd Oil Cooler
• Light weight Lithium battery
• N Pass Radiator
• Race/Button clutch
• Microtech Dash (wired to steering wheel)
• Radio antenna and wired radio button to steering wheel
• Steering wheel hook
• High quality “Lifeline” Quick release steering wheel hub
• S-Sport Italian Made Suede Steering Wheel
• All high quality fluids replaced at last meet – diff, gearbox and engine

Spares include (from what I can remember)
• Front doors (left and right)
• Rear doors x 3
• Spare bonnet (has a slight crease from flipping up)
• Spare bumpers and spare boot lid
• Lots of engine components – too many to list
• Tubs of other bits and pieces including brake parts, suspension arms, spare hubs plus more)
There’s probably more I’ve forgotten – please send me a message if you have any questions. Happy to try and help with transport if required

To see the car in action https://youtu.be/YXC-NgkqeCw

$24500

RX8 Cup Series 2020 Round 1: Race 4 | Drive through the pack This was the final race for us for the weekend. After a DNF in race 3 I had to start from the rear of the grid. Made my way to 4th then through it off the ...

The time has come for us to move on from our RX8 Cup Car.

For sale is our 2005 Mazda RX8 Cup Car. This car is a regular in the top 5 on track, but due to a lack of time to race it is time to move it on. It meets all current specs and is ready to roll straight onto the track and go racing for the remainder of the 2022 season or take some time and make it your own, ready for 2023

Included:
• Motorsport Australia Log Booked
• Engine: Engine was replaced last year and has only done 1 race meet since install. The engine has high compression (around 100 on both rotors) and is very punchy. Starts hot and cold
• AGI National Roll Cage
• Cold Air Intake
• Ryan Rotary Coil Pack and MSD Leads
• All RX8 Control Items fitted
• New front lower control arms with new upper and lower offset bushes
• All sound deadening removed
• Sparco Race Seat
• Schroth 6 point Enduro Race Harness
• Window Net
• NACA Duct
• Front Brake ducting/cooling
• 1 Race meet old brake pads
• New Fuel pump
• New spark plugs (1 race meet)
• Second fuel pump to prevent fuel surge
• LED rain light
• 2nd Oil Cooler
• Light weight Lithium battery
• N Pass Radiator
• Race/Button clutch
• Microtech Dash (wired to steering wheel)
• Radio antenna and wired radio button to steering wheel
• Steering wheel hook
• High quality “Lifeline” Quick release steering wheel hub
• S-Sport Italian Made Suede Steering Wheel
• All high quality fluids replaced at last meet – diff, gearbox and engine

Spares include (from what I can remember)
• Front doors (left and right)
• Rear doors x 3
• Spare bonnet (has a slight crease from flipping up)
• Spare bumpers and spare boot lid
• Lots of engine components – too many to list
• Tubs of other bits and pieces including brake parts, suspension arms, spare hubs plus more)
There’s probably more I’ve forgotten – please send me a message if you have any questions. You will need your own trailer.

$24500
https://www.my105.com/25400

Unfortunately due to work commitments we can't make the next round of the RX8 CUP SERIES. We wish all the competitors all the best for the round and will be back on track for the next race at Winton. Thankyou to our supporters and sponsors

OccSafe Australia Pty Ltd
Tanau and Associates
Brooker Group
AirShot Media
Envirotek International

🏁!!! DAY 2 WRAP UP!!!🏁

Many ups and downs today.

Race 2- started 6th and finished 5th we had some fuel issues but managed to bring her home!

Race 3- Started in 5th and got a great start, car was sitting pretty in p3 untill the car decided to fowl plugs leaving us rolling down the main straight, really sucks but we where able to creep home too 12th.

Race 4- starting 12th best start of the weekend was sitting in 6th by the end of the first lap car was a rocket, we once again where sitting in the top 3, sadly driver error i made a mistake on the last lap and came home in 8th.

Goods and bads to take home from this weekend, we know the cars fast and i am feeling more and more comfortable.

Cant thank dad and mum enough for taking the long journey down and for all there support as well as dad jumping on the spanners constantly this weekend

Big shoutout to mal and amy from OccSafe Australia Pty Ltd for there constant support of us over the past 4 years. and the help they gave us all weekend.

a huge thankyou too all our other sponsors with out you i would not have been able to hit the track this weekend!
Tanau and Associates
Brooker Group
Envirotek International
AirShot Media

bring on RD 2 in. few months time 🦾👌👏🏿

Starting p6 for race two today.

We have fixed the issues with the car so fingers crossed shes feeling good.

big thanks to Marcus ladelle for helping with some setup changes.

also a massives thanks to our sponsors for getting us here.

OccSafe Australia Pty Ltd
Tanau and Associates
Envirotek International
Brooker Group