Metal Skull Robotics - 金属头骨机器人

Battlebots 2018 Reality rear wheel | eBay This wheel is custom build for Reality and has been used in all battles of the 2018 season of Battlebots. A: The wheel was red when new, but it had such amazing traction on the Battlebots arena floor, the floor paint is now embedded in the wheel.

Here's the livestream to the DRG - FMB Worldcul Qualifier. Be sure to follow us!

Everything is ready for the DRG & FMB tournament in Gent next week. Will we see you there?

Here's the video of the second fight with Solstice. We we're quite nervous, the opponent had a fierce weapon. The fight took quite long and we soon ran out of air. Eventually the robot stopped due to the link that desoldered. Investigation showed that one of the motors had a small shortage and drawed way too much amps.

FMB @ Chinajoy, Shanghai - Solstice fight 2 FMB @ Chinajoy, Shanghai - Solstice fight 2

We've finally found the time to reflect on the FMB competition held in Shanghai China, at Chinajoy. For this competition we build a new featherweight, Solstice, which is our first full pressure flipper.

Below is the video of our first fight. We won by a OTA, which nobody thought was possible.

Very satisfied with the result. We'll upload the other fights soon.

FMB @ Chinajoy, Shanghai - Solstice fight 1 Video of the first fight of our new featherweight Solstice at the FMB World Qualifier held in Chinajoy, Shanghai.

All ready for FMB Shanghai!

Solstice is done! Just in time for the FMB competition next week in Shanghai, China. So relieved we managed to design and build this amazing machine in such short notice.

Last part we machined is the flipperarm. It started of as a solid billet of EN-AW7075 weighing almost 6kg. Final weight is about 600gr.

We thought it would be tun to gather pictures of all machine's we've build so far. Great fun to see the progress from the first wooden machine build back in 2004.