Factory Finish NI

Motorcycle and Automotive parts refinishing service. Set-up by Steven Beattie - a motorcycle enthusi It also looks cool!!

Follow me on Instagram factoryfinishni_

Vapour blaster up and running.... DM for pricing

Cerakote - What is it? Have you ever wondered how the factory teams get their bikes and parts looking so good in exotic different colours? Sometimes its hard anodising or akadizing - but most of the time its Cerakote. Cerakote is a polymer ceramic coating far superior to any other coatings on the market. It

is particularly suitable for parts that need an extra hard wearing finish. It is tolerant specific unlike standard paint and powder coat, is does not affect threads, bearing surfaces, passageways or interference fit parts including gasket surfaces. Perfect for tight tolerance applications and typically eliminates the need for masking. It is very high temperature resistant up to 1000 degrees Celsius! Can be used on engines, exhausts, brake calipers - basically can be applied to anything metallic and to plastic parts. Very high chemical resistance & excellent durability properties with extreme resistance to wear. There are over 100 colours available - I can get a particular colour in 48 hours if requested and I don't have it. Price List guide below -
Outer Clutch Cover £25
Inner Clutch £40
Water Pump Cover £10
Ignition Cover 2 Stroke £20
Stator Cover 4 Stroke £35
Rocker Cover £25
Hub £40
Caliper £25
Brake/Clutch Master cylinders with cover £25
Brake Hanger rear £15
Brake Hanger front £10
Triple Clamps £60
2 Stroke Cylinder heads - starting at £15
2 Stroke Cylinders - Starting at £40
Crankcases - £POA
Brake lever - £15
Suspension Linkage - £20
Suspension Knuckle - £15
Shock absorber bodies - starting at £50
Fork lugs £25 ea
4 stroke cyl heads £POA
Air boxes £POA
Swing arm starting at £80*
Wheels rims starting at £70 per wheel*
Fork Tubes £70ea
Swingarms £POA

Vapour blasting charged on time spent in machine. Above prices are based part being supplied ready to start coating process (all bearings and seals removed), removal of scratches and chips in metal surfaces where possible are extra if requested

I Can do oil filter covers, engine plugs, footpeg brackets, bar mounts, engine mounting plates.....anything else just ask. The parts should be supplied to me stripped down and clean/free from oil and grease. All bearings and seals removed - I can remove bearings, seals, and strip & rebuild brake calipers/master cylinders if required at additional cost. Parts can be dropped off/collected at my premises or leave your parts at...
Norman Watts
Stephen Russell Motocross
Spence racing
Russell's motorcycles

22/02/2026

This took a while. Spent more money on it than its worth....sure that's nothing new 🤣 Anyway turned out good.

2003 VOR450 MX (Vertemati Off Road)

25/01/2026

Been busy lately.....not so many posts but I haven't went away....

My mates 08 RM250 needed some love in the parts department...so whilst it was down it got some vapour blasting and Cerakote Sniper Grey 🎯.

Some new shiney bolts and a Doc Wob pv cover and it's ready for some fun times again.

The elves might have helped a bit. 🎅

06/12/2025

3/3.

2003 KTM 250SX

The first of the winter projects ✔

27/11/2025

Yamaha YZ Rinaldi brake pedals.....machined from billet and come with titanium tip 🤗

DM StormWorks Garage to purchase.....limited numbers so be quick.

E.A. Blythe & Co Precision Engineering

25/08/2025

Drumlanrig Classic Twinshock 2025.....

Great event.

Thanks to Adrian Lappin for the use of the brilliant big 4 stroke Husqvarna. It performed flawlessly all Weekend.

Managed to get 7th overall in the under 50s so pretty happy about that.

Good craic with the rest N.Ireland crew who were over for the weekend.

Thanks to Madmaxmedia for the pictures.

17/08/2025

Thomas Merton won the Tommy Stewart in year 2000 for the first time (and again in 2012).

25 years later on a 24 year old bike at Saul yesterday he's still having fun. The Husqvarna CR250 stuck it well and sounded class.

Good practice for Farleigh Castle for September.

Class event, well done to all involved in organising and running it and to all that participated. 👏

20/06/2025

Old school thumper ⚡

19/06/2025

What's thyz 🧐.....

Darren Lecky

StormWorks Garage

E.A. Blythe & Co Precision Engineering

14/06/2025

Great night last night at the NI Classic Scrambles Club at Craigalent. Mega weather, track was class, good racing and good craic 🍻

Thanks to all that helped to make it happen.

Pity the heavens opened and ruined it for today, but we got a good run last night.

12/06/2025

The pink mean machine 😈 and it's pilot. TM on the TM

30/05/2025

50mm Marzocchi FBF clamps for the Husqvarnas.....🔥

E.A. Blythe & Co Precision Engineering
StormWorks Garage

Claim ownership or report listing

Want your business to be the top-listed Gym/sports Facility in Armagh?

Click here to claim your Sponsored Listing.

Location

Armagh

Contact the business

Click here to send a message to the business

Telephone

+447407064840

Website

http://www.factoryfinishni.co.uk/

Address