Pro-Race Engineering

18/09/2026

Latest edition onto our webstore is Mahle pistons available for TFSI EA113 & TSI EA888's.

They also offer thermal barrier coated versions which greatly reduces heat transfer, improves performance & adds a layer of insulation to the piston crown to protect against thermal shock.

https://prorace-engineering.co.uk/product-category/engine-build-parts/pistons/mahle-pistons/

05/09/2026

Simple inexpensive upgrade!

02/09/2026

DSG DQ200 Upgraded Clutch with Kevlar Discs up to 470 Nm for 1.5 TSI EVO

This particular clutch is rated for 20-30% more torque capacity compared to the stock clutch. However, it has been tested successfully in applications with up to 470 Nm of torque.

Upgraded DSG DQ200 clutch with kevlar discs for the 1.5 TSI EVO — rated up to 470Nm of torque, the right upgrade for tuned 1.5 TSI cars running stage 1+...

21/08/2026

It's not just aftermarket bearings we offer on EA888's

We can and do still supply Genuine TSI EA888 Bearings both for the block and cap side in all colours.

Payl8r maximum borrowing amount £1500.00 please see the below calculator : please select the option at checkout. Subject to affordability assessments. PRO-RACE ENGINEERING LTD is an Introducer Appointed Representative of Social Money LTD t/a Payl8r. Missed payments may affect your credit file, futu...

19/08/2026

A Wavetrac rear diff for a MK7 Golf R that has recently been machined and fitted. The crownwheel has to be cut off the original diff and also drilled to be able to be fit onto the new wavetrac diff. Please send any enquiries to [email protected]

19/08/2026

Genuine TSI EA888 Gen 3 Water Pump now listed on our webstore.

We recommend using OEM and good quality components for vital areas of your build like this.

We recommend using OEM and good quality components for vital areas of your build like this.

18/08/2026

Elring 1.8T Bottom End Gasket Set

Save the hassle & cost of buying each necessary parts individually.

The kit includes oil filter seal, both top and bottom seals, sump plug and many more!

Elring 1.8T 20v bottom-end gasket set — OE-spec replacement set covering all bottom-end gaskets needed for a VAG 1.8T 20v rebuild (06A and ALT/BFB block...

14/08/2026

Genuine Honda Con Rod Bolt K-Series K20A K20Z for Stock Rods (Sold Individually)

HONDA Con Rod Bolt. As with all Honda parts expect perfect fit and function every time. Part number 13204-PRB-A01. Suitable for K-series found in Civic Type R EP3 / FN2 and Integra DC5. The price is per bolt.

HONDA Con Rod Bolt. As with all Honda parts expect perfect fit and function every time. Part number 13204-PRB-A01. Suitable for K-series found in Civic Type R EP3 / FN2 and Integra DC5. The price is per bolt.

11/08/2026

Maxx ECU EGT (TYPE-K) amplifier 0-5v out

EGT-K is a precision thermocouple amplifier providing high accuracy temperature measurement in the range of 0-1250 C. It converts thermocouple type-k non-linear millivolts signal to 0-5V linear (4mV/ ?C) output so it’s compatible with most industrial applications and data-loggers. It has built-in cold junction compensation so any length wires can be used.

MaxxECU EGT amplifier (Type-K) 0-5V output. Single-cyl EGT logging. Genuine. Stock & lead times: see page or call 01621 473023 / [email protected].

06/08/2026

Exhaust Manifold Fl**ge for Honda/Acura K-series motor If you are looking to build you own exhaust manifold for your k series engine, you need to start with the proper fl**ge. These exhaust manifold fl**ges will make the manifold-building process go much smoother. Made right here in united kingdom, these fl**ges are precisely laser cut from 12mm thick steel. These are a must for the DIY manifold builder!

Honda K20 12mm stainless exhaust manifold fl**ge. Anti-warp motorsport spec. Stock & lead times: see page or call 01621 473023 / [email protected].