Airgun Regulators

https://www.ebay.co.uk/itm/127623963608

Option 1:

Regulator Testing & Workshop Setting Tool inc Gauge.
To fit RAW action block's with 3/4" 16tpi UNF (USA Thread)
( To the layman: The male thread upon your regulator, that screws into the action block, will measure just under 19mm across the outside diameter and there will be 16 threads per inche = 25.40mm )

Option 2:

Regulator Testing & Workshop Setting Tool - Adaptor Only
To fit RAW action block's with 3/4" 16tpi UNF (USA Thread)
No Gauge - Has 1/4"BSP Compression Fitting, to install your own gauge.
( To the layman: The male thread upon your regulator, that screws into the action block, will measure just under 19mm across the outside diameter and there will be 16 threads per inche = 25.40mm )

Option 3:

Regulator Testing & Workshop Setting Tool inc Gauge.
To fit RAW action block's with 3/8" BSP-P
( Early RAW production, just after Theoben closure )
( To the layman: The male thread upon your regulator, that screws into the action block, will measure just under 16.6mm across the outside diameter and there will be 19 threads per inche = 25.40mm )

Option 4:

Regulator Testing & Workshop Setting Tool - Adaptor Only
To fit RAW action block's with 3/8" BSP-P
( Early RAW production, just after Theoben closure )
( To the layman: The male thread upon your regulator, that screws into the action block, will measure just under 16.6mm across the outside diameter and there will be 19 threads per inche = 25.40mm )

Option 5:

Spare 200bar / 3000psi Gauge Only
1/4"BSP Compression Fitting.

Have I Closed Down !!!

Yes & No: Airguns has been a hobby for 34 years now. Since I 1st built up an air rifle as an after school project (You wouldn't be doing that at school these days) & my main hobby for 29 years (After I damaged my Pelvis, prior to this No1 Was Bike Racing).

I guess that many with long term interests have, 'Come-Gone & Come-Gone again', At periods both 'Loved & Hated' them and on occasions they have 'Taken over and got a bit out of hand'.

Well I find all three to be the case at present and found that I am sadly very behind with other jobs that need doing around the home & with the family. Most importantly for me a Book or these days a Web-site, Local History (Not Guns ) that I promised Dad, I'd help him with - Then he died :-(.

So with 1500 Regulators to build up for various companies for Easter, an operation last week and so much more to do. I decided to knock Airgun's on the head for a short period. I need to get into some Rythem of being switched on for two weeks off for a week or similar.

Robert

https://www.ebay.co.uk/itm/115435645977

"NEW" Version of the Falcon / Titan P*P Air Rifle Pressure Gauge & Quickfill. Now is BLACK, with Twist Port Cover & Fosters 8mm Snap Probe.

https://www.ebay.co.uk/itm/115435777290

Whatever happened to these Badge Names Below? I thought that they were manufactured by Retray in Turkey (T20 being the 1st) then marketed 2018-20!!! under different names in different countries. I recall the regulators were 'Less Said The Better', and so owners / shops purchased a new MK9 Lancets to suit. However I haven't heard the names across my e-mail / tel for a few years now.

https://www.ebay.co.uk/itm/116346879327 New Tool Nut for BSA's - Made some of these after a lad a few weeks ago, came to see me as he had tried to drill one of the locking rings out and needle to say made a mess of the Locking Ring & Reservoirs Thread :-(

My 1st Ever P*P Build "Alien", That was 30 Years ago. It was 18 Shot, Lever Action. Camo-stock with Built In Lamp & Fold Down Bi-Pod. O and you could clip two magazines into the stock. Also Chromed, not Chemical Blacked.

Very sad to see the news that Jonnie Erwin has passed away :-( We were in the same Engineering and other classes at Lutterworth Grammar School, a life time ago. Always a wit, always smiling :-) RIP Jonnie

Hopefully shutting down for a period 'Yipppey' at end of May for a holiday of 4-8 weeks. May have to return every 2 weeks and so shop 'May' be on for 24-48 hours only over that period. I will be away on my boat and so don't get stroppy about no mail reply, airguns is a hobby not my job - I wont have WAP, G3-4-5, Internet or what ever it is, as not into that stuff 'Sorry'.

5000+ More Bubble Air Mail Bags for Regulator Shipping. Need more space :-)

Reel sent in to our Instagram channel by southeast_shooting_uk, our mk10 bottle regulator in a Kral Jumbo Hi Cap.
Shot in a 6mph gusting crosswind and with uncleaned and unweighted pellets through a multi shot magazine.

If you're on Instagram give a follow to southeast_shooting_uk. We could expect to see some more testing and results since fitting our regulator.
https://www.instagram.com/southeast_shooting_uk/

You can also follow us on Instagram here:
https://www.instagram.com/laneregulators/

Watch this reel by southeast_shooting_uk on Instagram