Jay Wolfe Metalwork

Come and see our stainless tanks at The Crick Boat Show this weekend - weather looks hot but our tanks are hotter 😎

Come and visit us at the Crick Boat Show at the Crick Marina from the 22nd to the 25th of May!

We make marine fuel tanks in all sorts of shapes and sizes here! This pair of saddle tanks measure 4 metres long.
We adjust our construction methods to suit the use and environment the tanks will be installed in. These tanks have been designed so that all welded joints are a fillet or lap joint for strength. The Alloy grade is 5083-H0, meaning all filler rods etc must be compatible with the parent metal. Our machined bosses allow hosetails to be screwed in place for fuel feed and returns.
We make holding tanks out of both aluminium and stainless steel - either to customer drawings or as is often the case, using the original failed tank as a pattern.

We originally designed and supplied a set of these mixing vessels to a customer over 10 years ago.
They came back for more as their operations have expanded.
Made here in the uk and mixing products as far away as malaysia!

Part way through a project to supply nearly 30000 litres adblue storage in these bunded tanks

When you visit imola on your holidays and unexpectidly bump into a s**t load of tanks you have made

No filter these tanks have been dipped, pickled and passivated for maximum corrosion resistance

Building some rails with the lad. Good job the workshop prep gave me half a chance of getting them done over a weekend!

Precision Engineering - 1 of 3 water storage tanks (21m3) expertly manoeuvred through our workshop doors (with mm clearance!) and then flipped over. Top Job Jason Lewis Andrew Fairey and Rees