United Ndt Training & Inspection Centre

"United NDT Training and Inspection Centre is the leading Training Institute and Inspection Company and prepares his product design. o PIPING INSPECTOR.

UNITED NDT TRAINING & INSPECTION CENTRE

A CAREER IN INSPECTION

‘Safety’ and ‘Reliability’ of any product is of utmost importance in today’s world. Any product, whether a washer or an aircraft, is expected to satisfactorily perform a specific function for some minimum period. To achieve this result, the designer studies the load requirement, operating environment, etc. However, a product coul

d prematurely fail during service due to several factors such as wrong design, mistakes during manufacturing, exposure to unexpected loads in service, changes in environment, etc. This premature failure can lead to simple stoppage of work or to a catastrophe. In all such cases, there is an economic loss and sometimes loss of life also. In order to minimize and where possible to avoid such unexpected failures, ‘QUALITY ASSURANCE’ and ‘QUALITY CONTROL’ are of utmost importance. Broadly speaking, ‘quality assurance’ means setting up a proper manufacturing sequence such that only ‘good’ products will be produced and ‘quality control’ is the program of checking or monitoring the functioning of various manufacturing steps. These ‘quality control’ checks could be simple Visual Inspection involving appearance check or dimensional measurement or it could involve using sophisticated NDT tests such as Radiography or ultrasonic. Today, it is expected that all personnel involved in the manufacturing industry as well as operators of various types of plants (power generation, petrochemical, etc.) and users of major industrial products are well aware of Inspection fundamentals. Right from the designer to the maintenance engineer, the knowledge of Inspection is becoming indispensable. In the early days of industrialization, such knowledge was gained by experience only. However it is well established now that proper knowledge can be efficiently acquired only by undergoing professional, organized training including both theory & practical and ‘hands on’ experience in the field. Also, it is not enough just to acquire the required knowledge and skill, but it is equally important to ‘prove’ that the acquired ‘knowledge and skill’ can be used properly. This ‘proving’ requirement has led to various ‘CERTIFICATION’ programs for specific sets of inspection skills. The most popular inspection certifications available today are:

o NDT INSPECTOR. o WELDING INSPECTOR

o COATING / PAINTING INSPECTOR. o PRESSURE VESSEL INSPECTOR. o LEAD AUDITOR

As regards job opportunities, maximum scope is for the ‘NDT INSPECTOR’ followed by the ‘WELDING INSPECTOR’ and ‘PAINTING INSPECTOR’.

Ø The most popular certification scheme for NDT Inspector is the program recommended by AMERICAN SOCIETY FOR NON DESTRUCTIVE TESTING (ASNT). The ASNT program is well accepted in many parts of the world, including Middle East, where many job opportunities are available. Under all certification schemes, certification is available in individual NDT methods. The NDT methods in maximum use are:

Ø Visual Testing.

Ø Radiographic Testing.

Ø Ultrasonic Testing.

Ø Liquid Penetrant Testing

Ø Magnetic Particle Testing.

Ø Radiographic film interpretation.

Ø The most popular certification schemes for WELDING INSPECTOR are the program recommended by AMERICAN WELDING SOCIETY (AWS-CWI) and THE WELDING INSTITUTE (CSWIP).

Ø The most popular certification schemes for PAINTING INSPECTOR are the program recommended by NATIONAL ASSOCIATION OF CORROSION ENGINEERS (NACE Level I & Level II) and THE WELDING INSTITUTE (BGAS 3/2). It is obvious that the job opportunities increase in proportion to the number of different certifications an individual has. In India, Training and Certifications are offered by several Institutions and even by many individuals. One should choose the training organization carefully based on the faculty, equipment and market acceptability.

03/06/2026

CAREER OPPORTUNITY – SAUDI ARABIA

United NDT Training & Inspection Centre invites experienced NDT professionals to apply for opportunities with a leading Oil & Gas project in Saudi Arabia.

Interview Location: Kochi, Kerala
Client Interview: 4th Thursday – June 2026

Positions Available:

RT Technician – 5 Years Experience

UT Technician – 3 Years Experience

PMI Technician – 3 Years Experience

PWHT Technician – 3 Years Experience

NDT Testing Technician – 3 Years Experience

Benefits:

Food Provided

Accommodation Provided

Transportation Provided

Insurance

Overtime as per Company Policy

Send Your Resume:
[email protected]

Contact:
+91 9544100035 / 28

Address:
United NDT Training & Inspection Centre
2nd Floor, Santha Building
Chathangattu Rd, Palarivattom
Kochi, Kerala – 682025

Website:
www.unitedndt.co

Selection is subject to client requirements and interview performance. Terms and conditions apply.

UTTechnician PMITechnician PWHTTechnician NDTTesting QAQC EngineeringJobs InspectionJobs KochiJobs GCCJobs CareerOpportunity HiringNow

03/06/2026

30/05/2026

30/05/2026

Hiring For Saudi Arabia

Client Interview at Cochin on 04th June 2026

-RT Technicain
-UT Technician
-PMI Technician
-PWHT Technician
-NDT Technician

Send CV to [email protected]

28/05/2026

🌙✨ Eid al Adha Mubarak! ✨🌙

On this blessed occasion, we extend our heartfelt wishes to all our clients, partners, students, and well-wishers. May this Eid fill your lives and the lives of your loved ones with peace, happiness, prosperity, and countless blessings. 🤍

May your Eid celebrations be filled with joy and gratitude. 🌟

25/05/2026

URGENT REQUIREMENT – REFRACTORY INSPECTION SPECIALIST | OMAN

We are seeking experienced Refractory Inspection Professionals for refinery turnaround activities.

Requirements:
• API 936 Preferred
• Refractory Inspection / Design Experience
• Oil & Gas Industry Background
• Knowledge of ASTM & API Standards

Apply Now:
[email protected]

www.unitedndt.co

United NDT Training & Inspection Centre. InspectionJobs TurnaroundProjects OmanJobs UnitedNDT

25/05/2026

NOW HIRING – COATING / PAINTING INSPECTOR | OMAN

Excellent opportunity for experienced Coating Inspectors in Oil & Gas Refinery Turnaround Projects.

Requirements:
• BGAS-CSWIP Grade 2 or NACE Level 2
• EPC / Refinery Experience
• SSPC, ASTM & ISO Knowledge
• Shutdown & Turnaround Experience Preferred

Apply Today:
[email protected]

www.unitedndt.co

United NDT Training & Inspection Centre RefineryJobs InspectionJobs TurnaroundProjects OmanJobs UnitedNDT

25/05/2026

HIRING – TA SUBJECT MATTER EXPERT (ASSET INTEGRITY SME) | OMAN

Opportunity for highly experienced Asset Integrity Professionals in major refinery turnaround projects.

Requirements:
• API 510 / 570 / 653 Mandatory
• ASNT Level II Certification
• 15+ Years Oil & Gas Experience
• Strong Turnaround Integrity Management Experience

Send Your CV:
[email protected]

www.unitedndt.co

United NDT Training & Inspection Centre TurnaroundProjects OilAndGasJobs RefineryJobs InspectionJobs OmanJobs UnitedNDT

25/05/2026

URGENT HIRING – MECHANICAL INSPECTOR | OMAN

We are hiring experienced Mechanical Inspectors for major Oil & Gas Refinery Turnaround Projects in Oman.

Requirements:
• API 510 Certification
• ASNT Level II (Minimum 3 Methods)
• Shutdown & Turnaround Experience
• Refinery / Petrochemical Inspection Background

Immediate Mobilization.

Send Your CV:
[email protected]

www.unitedndt.co

United NDT Training & Inspection Centre TurnaroundProjects InspectionJobs NDTJobs OmanJobs EngineeringJobs UnitedNDT

Claim ownership or report listing

Want your business to be the top-listed Gym/sports Facility in Kochi?

Click here to claim your Sponsored Listing.

Location

Kochi

Contact the business

Click here to send a message to the business

Telephone

+919544100037

Website

http://www.unitedndt.co/

Address

32/110 – B/C , Raj Tower, Chathangattu Road, Palarivattom, Cochin/25
Kochi
682025

Opening Hours

Monday	9am - 5:30pm
Tuesday	9am - 5:30pm
Wednesday	9am - 5:30pm
Thursday	9am - 5:30pm
Friday	9am - 5:30pm
Saturday	9am - 5:30pm
Sunday	9am - 1pm

United Ndt Training & Inspection Centre

Share

Location

Contact the business

Telephone

Website

Address

Opening Hours