PCP Shop India

Airforce Condor Regulator with Dual Gauge V2
Airforce Condor Regulator with Dual Gauge V2 (First of its Kind for the Airforce and Gunpower Airguns)

We have upgraded the regulator internals for more consistent shots and lesser wait time between shots.

Would like to thank our customers for their feedback so we could make further improvements and upgrades based on your requirements to our regulators.

Have upgraded the fill ports and micro gauges to larger threads from our previous models so it adds more life to the regulators as well.

Enhanced the looks of the regulators and it's much more sturdier than before and can handle up to 300 bar of input pressure.

Output range of the regulator can be internally adjusted from 100 bar to 250 bar.

We have been working on this for quite some time and have been periodically testing these regulators for utmost performance. We can proudly say that our regulators are now available for sale and will do a great job on the Airforce condor and the Gunpower airguns.

Dual Gauge design:

No more guessing what pressure the regulator is set at. Gauge shows you the output (Regulated pressure) as well as the input pressure. (Tank pressure). No more keeping track of shot counts or guessing and working hard to know the cut off pressure of your regulators. Set the regulator to the sweet spot, speed your pellets performs the best and just watch for the regulated gauge to trip below what it was set for.

Foster fill ni**le on the regulator for quick fill or tethering your airgun.

This regulator ensures that your tank retains the quick install and disconnect feature. You don't want to be looking for the Spin-Loc Tool when you want to get started or done shooting.

Larger pre chamber on our regulators in which we have combined both power and consistent shot count.

Built like a tank and tested to 300 bar(working pressure) for safety. We however recommend a working pressure of 250 bar which help the o-rings last longer. The burst pressure for these regulators are beyond 620 bar so they are very safe for use.

Sturdy gauges with metallic body for the wilderness with the airforce and gunpower airguns.

You also know if your regulator has developed a leak, this has been a daunting task is the past.
One day of shooting, the zero of your airgun changes and you think the regulator is the culprit. Could be true also might not have been the regulators fault at all. No more guessing.

Now many users would be concerned that it increases the length of pull due to the 2 and 1/2 inches length of the regulator. So we came up with a solution for that too. Just screw on these regulators to the 400 cc buddy bottle and you would be retaining your LOP. So the next thing that worries me is , Oh I'd have to reduced the capacity of the tank from the standard 460 cc to 400cc.

Okay so let's get to the math :
The 400 cc bottles we have are rated to 225bar so you would be filling to a higher pressure, than the max fill of 200 bar on the standard tank. And the next point is the most important one. When you have a regulator, you have a pre-chamber with regulated output of air. The air from the pre-chamber is unleashed on the strike of the valve by the hammer. By setting the regulator at its sweet spot, desired pressure, timing the valve by using the right hammer weights and spring pre-load, you are wasting very little air or none. You efficiently make use of the air which counts for every shot. Thus the smaller tank gives you approximately the same no. of shots than the 460 cc tank (200bar) or even better. This is not to stir a debate that smaller tanks are better :) But priority here was to retain Length of Pull.

Each regulator is filled to 300 bar for 24 hours before they ship to ensure they are free of leaks.
The best raw materials have been used to machine this regulator and to ensure we have a light, durable, safe and proven product. They have been chosen, designed with materials and specs to the highest tolerances for the right job.
Safety is the highest priority for any of the products we manufacture.

Write to us if you need any further info on these regulators. Contact Us

Highly recomend u install these regualtors on our "Buddy Bottle - BARE - 500cc 250BAR M18 x 1.5 Thread" for better results when compared to standard airforce or gunpower tanks as our tanks are rated to 250 bar and u will enjoy the higher shot count.
If Length of Pull is a concern then, you should be looking at buying our 225 bar compact tanks "Buddy Bottle - BARE - 400cc 230BAR M18 x 1.5 Thread" . These tank along with the regulators would be of the same length of a standard Airforce or Gunpower tank.

If you need the ultimate shot count then the anwer to it is our "1 Ltr Luxfer Carbon Composite Cylinders 300BAR (61cu)(1000cc)"

If you have your own tank with M18 x 1.5 threads, then it would be a direct fit as well.

Not sure about the combo with your existing valve :
for some the priority is high power,
for others its average power and higher shot count and
we have few who would want low power, a quiet backyard friendly setup with an endless shot count.

Price on request

Male to Male QD Foster/Coupler

Specifications:

Male to Male quick-disconnect coupling/foster
Made from Quality Stainless Steel
Rated for 5,000 psi

A must for those using portable compressors to fill their scuba or scba tanks.

Description :

Used to Interconnect female foster/coupler to female foster/coupler. Quality Stainless Steel. Our QC02 fittings will also connect directly to the female quick disconnect coupler supplied by most popular rifles such as Daystate, Crosman, Benjamin etc.

Contact us if you need any further customization and we shall be happy to get it done for you.

Price on Request

300 BAR DIN to Male QD Adapter for Scuba/SCBA Tank filling

Suitable for both 200 bar and 300 bar DIN cylinders.
Stainless Steel DIN Fittings attaches directly to scuba or scba tank with male foster/qd on the open end.
Male coupler/foster will couple directly to female fosters/couplers and make it easy for filling air into the tanks with our
or any other compatible compressor.
Always make sure the male and female coupler has been seated well before filling air into the scuba tanks or the hose may whip, if not seated properly.

DIN Adapter and male coupler/foster is made out of stainless steel to last a lifetime.
Interconnect in between is made of heavy duty brass and these adapters can withstand 600bar.
Always check your tanks and fill only upto the recommended and rated pressure.
Use safety precautions when filling high pressure air.

Price on request

Heavy Duty Portable Compressor rated 300 bar with Auto Shut Off.
Heavy Duty Portable Compressor rated 300 bar with Auto Shut Off. (0 to 300 bar)

Introducing one of its kind "Heavy Duty Portable Compressor rated 300 bar with Auto Shut Off."

Now you need not worry about not having a source to fill your scuba or scba cylinders.

This heavy duty compressor will fill your 6 ltr Carbon Fiber, Steel or Aluminum Tank is just about 30 minutes.

No need of any industrial power supply for powering this unit.

Works on normal 230V with any 8 Amps socket.

Faster and efficient fills with dual mode water cooled system.

Lower maintenance and portable design without compromising on speed and efficiency.

Has an auto cutoff feature so u can be rest assured about the max fill this compressor will fill to.

This compressor can fill from 0 to 300 bar which is 0 to 4351 psi.

Ships with quick coupler and 3 feet longer hose to get you started right out of the box.

Ships with spares for any future maintenance requirements, backed by our support for help needed with this heavy duty compressor.

Don't be fooled by the size, it's weigh about 28 kgs and is very sturdy built with a heavy duty protective guard for carry and to protect the internals of the compressor.

Dimensions of the compressor are 17.1 in X 15 in X 15 in

MUST READ THE MANUAL AND FOLOW INSTRUCTIONS PROPERLY BEFORE FILLING.

ITS VERY IMPORTANT TO FOLLOW SAFETY PRECAUTIONS WHILE FILLING HIGH COMPPRESSED AIR.

MUST BE HANDLED OR SUPERVISED BY AN ADULT AT ALL TIMES WHILE BEING OPERATED.

Price on request

Hand Pump rated 300 bar with female quick coupler

Ships with spare O Rings, Silicon Grease and Parts required for Maintenance.

Made out of Stainless Steel which would help prevent rust formation and gunk in your Hand Pumps.

Longer life and durability due to better quality of materials used for manufacture.

Rated and fills up to 300 bar.

Self Service, wear and tear parts included so you can fix the pump at ease and without any dependencies.

New longer and flexible hose so you don't have to keep your expensive airguns onto the ground.

Female Coupler attached to the hose end which is compatible with most airguns and air pistols in the market.

Some air guns may require additional adaptors to attach the male probe/fill adapter onto the quick coupler at the hose end.

Diana P1000/Walther 1250 Dominator 300/200 BAR DIN Male Adapter

Fill your Diana P1000 or Walther dominator 1250 air tanks form a Scuba or SCBA tanks with the 300/200 BAR DIN male adapter.

This is all you would need to get started if you have a SCUBA or SCBA Tank with DIN Female adapter on the tank.

These are tested to 300 BAR and can handle way more than 5000 PSI.

Made out of high grade of steel, never rust and least sucestible to wear and tear.

Would last you a lifetime.

Price on request

Airforce Brass Valve Guide

Airforce Brass Valve Guide.

Comes with o-ring pre-lubed with silicon grease and installed.

Fluted Breech

The custom fluted breech replaces the Airfoce Standard Breech.

Made from higher grade of delrin with higher Anti friction properties for smoother and better performance.

Important Note:- Remember to check the model of your airgun shown along with the Fluted Breech pictures, as this is only compatible with the older version.

Price on request

Heavy Steel Hammer (90 g)

Used in Conjunction with custom condor valve !

The custom heavy steel hammer is used in conjunction with custom valve for more fpe.

The standard AirForce hammer weighs approx 49 grams. An add on weight weighing approx 19 grams is used in-line on the AirForce Condors, summing it upto 68 grams.

The above custom heavy steel hammer with custom delrin guides weigh 93 grams and replaces the standard AirForce hammer for delivering more power and consistent performance.

This custom steel hammer is corrosive resistant and least susceptible to wear and tear.

Important Note:- These are now compatible with both the older versions and newer models.

Price on Request

Heavy Brass Hammer (95 g)

Used in Conjunction with custom condor valve !

The custom heavy brass hammer is used in conjunction with custom valve for more fpe.

The standard AirForce hammer weighs approx 49 grams. An add on weight weighing approx 19 grams is used in-line on the AirForce Condors, summing it upto 68 grams.

The above custom heavy brass hammer with custom delrin guides weigh 95 grams and replaces the standard AirForce hammer for smoother and consistent performance.

Important Note:- These are now compatible with both the older versions and newer models..

Heavy Brass Hammer (70g)

he above custom heavy brass hammer with custom delrin anti-friction guides weigh 70 grams and replaces the standard AirForce hammer and extra weight for smoother and consistent performance.

The standard AirForce hammer weighs approx 49 grams. An add on weight weighing approx 19 grams is used in-line on the AirForce Condors, summing it upto 68 grams.(Reference Pic Shown Above)

The Custom brass hammer consolidates both airforce hammer and extra weight into a single part and reduces wear and tear as the 70 grams hammer rides entirely on the anti-friction delrin guides, unlike the Airforce extra weight.

Important Note:- Remember to check the model of your airgun shown along with the hammer pictures, as this is only compatible with the older version.

Price on Request

Kalibr Fill Probe / Adapter

Kalibr Fill Probe / Adapter for filling its air reservoir

Comes with dowty washer and male foster fill.
Dowty washers help provide a seal fit without too much torque. Having male foster fill helps provide quick disconnect solutions, you must have the female foster fill on the end of the hand pump hose or filling end of your scuba or scba tank rigs.
Not sure about how you connect the coupling fittings, kindly contact us and we shall be happy to help.
Made from high grade steel.
Corrosion free and tested to higher fill pressures. (300 BAR)

Imp Note : Do NOT fill above the recommended pressure on your airguns.

Fits the following models of Kalibr :
Kalibr Cricket Carbine
Kalibr Cricket Bullpup

Price on request