Singular Cycles NZ

  • Home
  • Singular Cycles NZ
Call Directions Website Contact the business

Singular Cycles NZ Singular Cycles - Steel is Real

28/01/2022
Perhaps the most singular Singular, the Peregrine is back!  The Mk1 Peregrine was a classic, considerably ahead of it’s ...
24/01/2021

Perhaps the most singular Singular, the Peregrine is back! The Mk1 Peregrine was a classic, considerably ahead of it’s time a “gravel” bike before the category existed. The Mk3 will no doubt achieve the same status. The key changes are contemporary axle and disc brake fitment, better cable routing, refined tubing spec and fork design. What hasn’t changed is the classical styling, the lugs, the ebb to adjust BB drop for different wheel sizes or singlespeed chain tensioning, the extra clearance for bigger tires that pushes the Pergrine slightly outside of what we have come to recognise as the standard “gravel” format. It was never an easy bike to explain or catergorise, those that got it loved it, plenty of others really did not get it and I suspect the same will still apply. Best I leave it to Sam to explain:

http://www.singularcycles.com/our-products/peregrine/

As far as I am aware there are currently eight Mk1/Mk2 Peregrines in New Zealand, I would like to hope we can do a bit better than that with the Mk3. Historically I just took a guess with respect to sizes, I imported a selection and hoped I got the mix about right. Invariably this was not the case and I would run out of some sizes whilst having an excess quantity of others. With respect to the new Peregrine this is further complicated by two colour options and more sizes. So, on that basis if you are at all interested in getting your hands on one of these magnificent frames please get in touch with me. Obviously formal pre-orders and deposits are great but even if you are not in a position to make a commitment just yet or would like to see/ride a Peregrine before a possible purchase I would love to know what size and colour you would most likely be interested in. Given the current state of the global bicycle industry supply chain I suspect we’re only going to get one shot at this in the foreseeable future so if possible I want to make sure I get the frames that you, the Singular fans are looking for.

Pricing will be in line with the UK pricing including VAT/GST. Our GST rate is slightly lower but our shipping costs are slightly higher which makes up the difference. When the frames arrive, if you want to buy one from stock they will have a recommended retail price of $1890.00 (frame, fork, ebb insert and all bolts and cable clips) including NZ GST.

As per the UK we are going to offer pre-orders at a reduced price of $1600.00. Please contact me to confirm timing and to make a deposit if you wish to secure a frame at the pre-order price.

Puffin, an endangered species!Okay, we’re down to our lucky last Puffin frame (excluding my personal Puffin).  I realise...
06/12/2018

Puffin, an endangered species!

Okay, we’re down to our lucky last Puffin frame (excluding my personal Puffin). I realise that the requirement for 135mm front / 170mm rear hubs is a barrier for some so with this last frame we will throw in a pair of quality hubs for free:

Puffin Frame incl EBB size Large
Puffin Touring Fork
Fatback Hubs and Skewers with Sram XD Freehub Body
Free Shipping within NZ

$550 - Waaaaay below cost. Get yourself a bargain for Christmas!

I hate to use phrases like “Stock Clearance” and “Blowout”, but in this case it’s an accurate description.  It looks lik...
16/09/2018

I hate to use phrases like “Stock Clearance” and “Blowout”, but in this case it’s an accurate description. It looks like Sam at Singular HQ is gearing up for another production run so in preparation we need to clear out any remaining stock we have in the shed, hence we are offering the following to our loyal followers, at “crazy below cost prices”:

Puffin Frame and Fork - $550 + shipping - Medium and Large Available (can also supply appropriate hubs at very good price)

Osprey Frame and Fork - $550 + shipping - Medium Available

Feel free to message with any questions, we can possibly also help with parts for complete bike builds.

Singular Puffin Review and Special PricingSingulars are by definition niche bikes, steel, generally rigid, sometimes sin...
19/02/2017

Singular Puffin Review and Special Pricing

Singulars are by definition niche bikes, steel, generally rigid, sometimes single speeds, they represent a very small slice of the overall bicycle pie. The Singular Puffin is a wafer thin sliver of that pie, a niche within a niche within a niche. Steel, rigid, EBB, and the capacity to take really, really big tires (26 x 4.7, 29 x 3.0) on first inspection it looks to be a very specific tool for a very specific type of riding. Except, as I discovered, it’s not, it’s actually just a really nice mountiainbike.

I’d always pegged the current version of the Swift as the ultimate allrounder, with the capacity to run either 29er or 27.5+ tires it’s a great mountainbike either with multiple gears or just one, and it is great bikepacking bike, particularly with the optional touring fork. I’ve spent a ton of time on the Swift with 29er wheels and of late I’ve been enjoying the added traction and comfort of 27.5+. That experience of the 27.5 x 3.0 tires piqued my interest in 29+ and therefore the Puffin, and so I took the plunge and built up a Puffin with a 29+ wheel set and Maxxis Chronicle 29 x 3.0 tires. I’ve been riding the Puffin as my primary mountainbike for the last 4 months, I still love the Swift but I’m not going back to my smaller wheels any time soon.

Clearly this is all highly subjective, but for me the larger diameter wheels offer real advantages. I’m tall, I ride a large frame and that no doubt does bias me towards the bigger wheels. I was also a very early adopter of 29er wheels so I’m already sold on the general principle that larger diameter wheels and the benefits they offer in terms of roll-over ability and a bigger tire contact patch. I liked the benefits that the 27.5 x 3.0 tires on the Swift offer in terms of traction, comfort and the ability to run lower tire pressures but in terms of diameter they are no larger (actually slightly smaller) than the 29 x 2.4’s that I was running previously. The 29 x 3.0 Chronicles (on a 45mm rim) on the Puffin offer all the traction and comfort advantages of the 27.5+ tires but the additional diameter makes for an altogether different riding experience, not surprisingly it reminds me of the way I felt when I moved from 26 to 29 inch wheels. Faster rolling, smoother, more comfort, stability and more traction, corrugations on gravel roads are erased. Get the tire pressure just right and the ride is fantastic.

I also own a dedicated 26 x 4.0 fatbike, it is great in sand, snow and super technical chunky rocky terrain but there’s no denying that all of this comes with the downside of a ton of rolling resistance. To be fair the tires I have on my fatbike are biased towards maximum traction. There are faster rolling options, but the simple fact is that on less technical terrain the fat bike feels slow. On the other hand the 29 x 3.0 Chronicles on the Puffin feel fast, even on pavement they they roll quickly and as far as I can tell they give very little up to a 29 x 2.4. Personally, and in particular for bikepacking 29+ is my first choice.

The Puffin would make a great singlespeed, it has an Eccentric Bottom Bracket for single speed chain tensioning and it also allows you to adjust the BB height when running gears. Unlike the Swift it has a tapered steerer tube to add some stiffness to the front end given the extra loads imposed by bigger wheels, but this also opens up options in terms of suspension forks (29+ Pikes are available…). Puffin downsides, there’s no denying that 100mm bottom brackets and 170/135mm hubs are not always easy to find. We have hubs in stock and the upside is that they build into very stiff and reliable wheels. The 100mm BB does put some people off, popular wisdom suggests that the wide “Q-factor” will give some riders issues. Whilst this may be the case for smaller people, personally it was never an issue for me. I actually came to enjoy the wider stance and was comfortably swapping back and forth between my Puffin and my Kite (68mm BB) with no issues.

Of course the other important point is that the Puffin can also be set up as a conventional fat bike, with 26 x 4.0 - 4.7 tires. It will take a Rock Shox Bluto suspension fork and I would hazard a guess that it would probably also take a 27.5 x 3.8 tire. With two wheelsets, 26 fat and 29+ it is effectively two bikes, if you live near the snow you could go 26 fat in the winter and 29+ in the summer.

Normal MSRP on the Puffin frame and fork is $1199. In light of my own Puffin experience I would like to see some others enjoy one too so while stocks last we are running a special on the Puffin Frame and Touring Fork, available in sizes Large and Medium for $899 incl GST and delivery within NZ. We also have hubs, wheels and complete build kit options so send us a message if you’d like a quote on a complete or partial Puffin build.

Singular Kite V2 ReviewGravel bike, cyclocross bike, fast brevet / light touring bike, yep, all of the above.  I’m a big...
09/10/2016

Singular Kite V2 Review

Gravel bike, cyclocross bike, fast brevet / light touring bike, yep, all of the above. I’m a big fan of this type of bike, they’re incredibly versatile, comfortable and fun on all sorts of surfaces. They’re also fast, really fast. With the appropriate tires the Kite gives up very little to a conventional “road” bike, but when the road turns to gravel the disc brakes and the ability to run higher volume tires give the Kite a significant advantage. Personally I was a bit surprised by Sam’s decision to move to a carbon fork on the new Kite, to date Singular has been an all ferrous brand, both frames and forks. The original V1 cantilever brake Kite came with a lovely supple steel fork with a straight steerer, it had a nice ride quality but it was kind of heavy. The new Kite comes with carbon fork with the tapered steerer and the frame has a very elegant tapered head tube which in turn is welded to a oversized thin wall steel down tube. What this means is that whilst the new Kite frame and fork is considerably lighter that the cantilever Kite and the resilience and smoothness is still there it is matched with new level of solidity and precision in terms of handling. Having had a good amount of ride time on the new Kite with the carbon fork I now completely understand Sam’s motivation to move in this direction, the modern oversize steel frame and carbon fork are very well matched.
It is also worth noting that in this era of emerging standards for bottom brackets and thru axles with the V2 Kite Sam has taken a conservative approach with a conventional threaded BB and quick release dropouts. I love the threaded BB and to date I have found no fault with the open dropouts (IMHO if you use Shimano or Campagnolo QR skewers then the argument for thru axles on this style of bike is considerably lessened). I built my bike with a wide range 2x10 drivetrain (11-36 cassette, 50/34 chainrings), cable actuated hydraulic brakes and some light XC mountain bike wheels (with various tires). It has carried me to the top of the Col du Tourmalet (pictured at the summit) and on some sketchy gravel backcountry adventures and has become my go to bike for most of my riding over the last six months. I loved the original V1 cantilever Kite, and this new V2 Disc Kite is a big step forward. Furthermore at $1200 for the frame and fork it’s a bargain. Medium, Large and XL frames in stock. Contact us if you would like a quote on a complete bike.

In the spirit of competitive cooking television and the alarming concept of "Cauliflower Done Five Ways”, I present “Sin...
06/06/2016

In the spirit of competitive cooking television and the alarming concept of "Cauliflower Done Five Ways”, I present “Singular Swift Done Five Ways”. One of the hallmarks of the Swift has been it’s versatility and these latest frames take that even further in terms of the options with “Plus Sized” rubber. Forgetting drop bar / flat bar / Jones bar options, and singlespeed / 1x/ 2x / 3x / IGH and just focusing on the frame fork and wheels (or else we end up with "Swift Done Seventy Five Ways" and we explode the internet), yields some interesting options. Thus I present (in order):

“Regular” 29er Wheels Front and Rear - Industry Nine Trail Rims (23.4mm inner width), WTB Vigilante 2.3 Front Tire, Schwalbe Rapid Rob 2.1 Rear Tire - Centre of BB 302mm above ground

27.5+ Wheels Front and Rear - Derby 650b AM Rims (36mm inner width), Schwalbe Nobby Nic 2.8 Front Tire, WTB Trail Boss 3.0 Rear Tire - Centre of BB 294mm above ground

29+ Front Wheel, 27.5+ Rear - Derby 29er AM Front Rim (29mm inner width), Derby 650b AM Rear Rim (36mm inner width), Maxxis Chronicle 3.0 Front Tire, WTB Trail Boss 3.0 Rear Tire - Centre of BB 304mm above ground

29+ Front Wheel, “Regular” 29 Rear - Derby 29er AM Rims (29mm inner width), Maxxis Chronicle 3.0 Front Tire, Maxxis Ikon 2.35 Rear Tire - Centre of BB 305mm above ground

And just for the sake of comparison, the same frame but fitted with a 120mm travel suspension fork…

“Regular” 29er Wheels Front (Suspension fork) and Rear - Industry Nine Trail Rims (23.4mm inner width), WTB Vigilante 2.3 Front Tire, Schwalbe Rapid Rob 2.1 Rear Tire - Centre of BB 327mm above ground

Comments:
- 27.5 x 2.8 and 27.5 x 3.0 are quite different animals. They’re quite similar in terms of diameter but the 3.0 WTB is substantially wider. The 2.8 Schwalbe looks like a big regular tire, the 3.0 WTB looks massive, almost fat bike massive. I had intended to use a WTB 3.0 on the front as well but I leant it to a friend in need, so that waits for another day.
- All the BB heights were measured with the EBB in the “low” position. If you’re running gears you can adjust the EBB to take the BB height on the smaller wheels up to match that of the bigger wheels.
- All of the combinations shown fitted with good clearance. A 29er plus (3.0 Chronicle) would not fit on the back, but that said the 2.35 Ikon on the wide Derby rim is very big for a “regular" 29er.

Next step is to build the bike and begin testing all of the options. I must admit I’m probably most intrigued by the 2 options that feature the Chronicle up front but I will concede I’ve always been a sucker for big wheels.

Time to build a Swift demo bike. Let's try something new.
01/06/2016

Time to build a Swift demo bike. Let's try something new.

Address


Alerts

Be the first to know and let us send you an email when Singular Cycles NZ posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Singular Cycles NZ:

Shortcuts

  • Want your business to be the top-listed gym/sports facility?

Share