SJ & J Heavy Equipment Parts Trading

KOREAN FACTORY
100% MADE IN KOREA

SUNJIN Vibro hammer - Top Gripper

Fit to you 3/4 size excavator

Can install maximum of 12 meters sheet pile

✔Free delivery

✔Free installation

✔Free operator training

✔1 year warranty

●MODEL : S250
●EXCAVATOR CLASS (Operating Weight, ton) : 18~24
●VIBRATION RATE (vibrations/min) : 2000~2500
●OPERATING HYDRAULIC PRESSURE (bar) : 180~200
●HYDRAULIC FLUID FLOW RATE (L/min) : 130~180
●SWING ANGLE (degree) : 360
●CLAMPING JAW (mm) : 65
●MAIN HAMMER WEIGHT (kg) : 1600
●EXTENSION BOMM WEIGHT (kg) : 600
●DIMENSION Lx W x H (mm) : 1870 x 1040 x 750

FEATURES

Robust
Rock Grinders(Drum cutters) are reliable and long lasting because the drive train is over-engineered and the attachment of the cutter drums is very secure. They are designed to be low maintenance.

Strong
Cutter heads from Rock Grinders(Drum cutters) are designed to provide the optimum cutting power at the recommended cutting speeds. They guarantee a smooth cutting action while providing each pick with the maximum cutting power to pe*****te the rock.

Reliable
High torque hydraulic motors drive extremely large spur gears to turn the cutter drums. The gear wheels are so robust the drum cutters can be used in the most difficult conditions without risk of failure.

Quitet and Low Vibration
With low vibration and quiet operation, rotary drum cutters can work in environmentally sensitive areas.

SUNJIN Vibro Ripper

The SUNJIN Vibro Ripper is an exceptional tool for demolition, excavation, slag recycling, dredging, trenching, underground mining, and even underwater applications, due to an enclosed pressurized chamber in the attachment head that does not need an air supply, as traditional hydraulic hammers require.

The SUNJIN Vibro Ripper has developed to meet client’s needs for increased performance and production output in rock excavation and demolition, lower maintenance costs, less down time, and better warranty conditions.

The SUNJIN Vibro Ripper’s closed energy chamber is fully protected from dust, water, and dirt, providing trouble free performance under the most severe conditions

Side gripper Vibro Hammer

MACHINE FEATURES

• G30 is Robotic Pile Drivers enabling you yo drive sheet piles, steel tubes, timber piles, h-i beams, cheaper, safer, quicker than traditional pile drivers.
• G30 is Robotic Pile Drivers With Side Grip and Bottom Clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile.

ADVANTAGES

• Drive Steel Sheet Piles , Steel Tubes , Timber Piles, H-I Beams.
• No Manpower Needed except excavator operator resulting less cost . • Quick Change of Hands Suiting Your Pile Type and Size.
• Special Design resulting No Over Heating Problem.
• Carrier : 18-25 tons class excavators.

Vibro Hammer
MACHINE FEATURES

• Outstanding workability and mobility.
• Easier operate when there is not enough vertical clearance above the foundation to permit use of a conventional pile hammer such as downtown area, bridge area and the vicinity of high-voltage electricity power lines than crane hammer does.
• Equipped with bigger vibration force powered by hydraulic motors and optimal bearings for high frequency vibration.
• Install vibro-isolating rubber for high frequency purpose.
• Easier connect and disconnect hydraulic hose lines to hammer from excavator.
• 360-degree swing for operator convenience.
• Comfortable driving and extraction of sheet pile, H-pile and tube pile with wire hanging method. • The clamping lug can handle and move construction materials easily.
• Pile driving power improved by 20% compared to the existing equipments.
• Rigid clamping by Hardox inside.
• Lower cost of maintenance than crane hammer.