Dear Students,
In light of COVID-19 pandemic and the unsure nature of the re-opening of schools in Trinidad and Tobago, AIMS is temporarily suspending all courses until further notice. Registration for new students will not be accepted during this period.
Please stay safe in this unsure time.
Advanced Intelligent Modeling Solutions (AIMS)
AIMS
Share
AIMS is an Autodesk Authorized Training Center, and is the only fully local 3D Laser Imaging Company in Trinidad and Tobago.
3D Laser Scanning in Trinidad and Tobago is now available from Advanced Intelligent Modelling Solutions Limited. AIMS is currently the only fully local 3D Laser Imaging Company based in Trinidad and Tobago. An Autodesk Training Center, AIMS also provides Training for Autodesk products including AutoCAD, Revit, 3ds Max and Civil 3D, and well as other training including CadWorx Plant Professional, CadWorx P&ID and Caesar Pipe Stress Analysis.
13/03/2020
Next cycle of classes begins March 31st!
AutoCAD 2D Modelling (Levels 1 & 2)
MONDAYS AND WEDNESDAYS
April 1st - May 13th
5:00pm-8:00pm
SATURDAYS
April 4th - May 9th
9:00-3:00pm
Autodesk Revit Architecture
TUESDAYS AND THURSDAYS
March 31st - May 7th
5:00pm-8:00pm
Send us a message or give us a call! 377-2467
Dear students, please be advised that our Training Center will be closed until Saturday 21st March as mandated by the Government.
22/01/2020
Ready, set, GO!
Autodesk Training at AIMS kicks off Feb 1st!
SATURDAYS
AutoCAD 2D Modelling (Levels 1 & 2)
February 1st - March 14th
9:00-3:00pm
MONDAYS AND WEDNESDAYS
AutoCAD 3D Modelling (Level 3) with Fusion 360
Feb 4th - March 16th
5:00pm-8:00pm
TUESDAYS AND THURSDAYS
Autodesk Revit Architecture
February 3rd -March 17th
5:00pm-8:00pm
Send us a message or give us a call! 377-2467
31/10/2019
Last chance for 2019 Autodesk courses!
AutoCAD (2D Modelling - Levels 1 & 2)
Mon/Wed/Sat
Nov 25th - Dec 21st
Revit (Revit Architecture)
Tues/Thurs/Sat
Nov 26th - Dec 21st
Send us a message or give us a call at 377-2467.
AIMS is an Autodesk Authorized Training Center.
25/09/2019
Our 2nd-to-last cycle for 2019 starts October 12th!
Secure your seat by sending a message or giving us a call at 377-2467.
Autodesk Revit Architecture
Oct 19th-Nov 23rd (Saturdays)
AutoCAD Levels 1&2 (2D Modeling)
Oct 14th-Nov 20th (Mondays and Wednesdays)
AutoCAD 3D/Fusion 360 (last for the year)
Oct 15th-Nov 21st (Tuesdays and Thursdays)
26/08/2019
Did you know? Our next cycle of classes starts in one week!
Send us a message or give us a call at 377-2467 for more information.
BACK TO SCHOOL!
...Software Training that is 🙂
AutoCAD Levels 1&2 (2D Modeling)
Marabella
Date: September 7th - October 12 (Saturdays only)
Time: 9:00am-3:00pm
Cost: $3000
Pre-requisite: None
Revit Architecture
Marabella
Date: September 2nd - October 9th (Mondays and Wednesdays)
Time: 5:00pm-8:00pm
Cost: $4000
Pre-requisite: AutoCAD Levels 1&2 (done at any institute)
Kelly Village
Date: September 3rd - October 10th (Tuesdays and Thursdays)
Time: 5:00pm-8:00pm
Cost: $4000
Pre-requisite: AutoCAD Levels 1&2 (done at any institute)
Send us a message or give us a call at 377-2467 for more information!
AIMS is an Autodesk Authorized Training Center.
08/08/2019
BACK TO SCHOOL!
...Software Training that is 🙂
AutoCAD Levels 1&2 (2D Modeling)
Marabella
Date: September 7th - October 12 (Saturdays only)
Time: 9:00am-3:00pm
Cost: $3000
Pre-requisite: None
Revit Architecture
Marabella
Date: September 2nd - October 9th (Mondays and Wednesdays)
Time: 5:00pm-8:00pm
Cost: $4000
Pre-requisite: AutoCAD Levels 1&2 (done at any institute)
Kelly Village
Date: September 3rd - October 10th (Tuesdays and Thursdays)
Time: 5:00pm-8:00pm
Cost: $4000
Pre-requisite: AutoCAD Levels 1&2 (done at any institute)
Send us a message or give us a call at 377-2467 for more information!
AIMS is an Autodesk Authorized Training Center.
19/07/2019
Check out the upcoming class schedule! Send us a message or give us a call at 377-2467 for more information.
Summer time! 🌞
AutoCAD Levels 1&2:
Marabella
July 22nd-August 28th
5:00pm-8:00pm (Mon & Wed)
July 27th-August 31st (Saturdays)
9:00am-3:00pm
Kelly Village
July 23rd-August 29th
5:00pm-8:00pm (Tues & Thurs)
Price: $3000
Look out for another week-long summer CAD in July and August!
Send us a message or give us a call at 377-2467.
17/07/2019
Who should take this SUMMER course?
- Secondary school students (Form 4+)
- In particular, students pursuing Technical Drawing or BMED
- Tertiary Level Students (Mechanical, Civil, Electrical Engineering students)
- Any student with interest in Engineering
- Any young person interested in learning how to draw using CAD (Computer-Aided Drawing)
AutoCAD Fundamentals (2D Drawing)
July 29th - August 2nd
Time: 9:00am-3:30pm
Cost: $3000
Send us a message or give us a call at 377-2467.
17/07/2019
Summer time! 🌞
AutoCAD Levels 1&2:
Marabella
July 22nd-August 28th
5:00pm-8:00pm (Mon & Wed)
July 27th-August 31st (Saturdays)
9:00am-3:00pm
Kelly Village
July 23rd-August 29th
5:00pm-8:00pm (Tues & Thurs)
Price: $3000
Look out for another week-long summer CAD in July and August!
Send us a message or give us a call at 377-2467.
11/06/2019
Who should take this SUMMER course?
- Secondary school students (Form 4+)
- In particular, students pursuing Technical Drawing or BMED
- Tertiary Level Students (Mechanical, Civil, Electrical Engineering students)
- Any student with interest in Engineering
- Any young person interested in learning how to draw using CAD (Computer-Aided Drawing)
AutoCAD Fundamentals (2D Drawing)
June 24th - 28th
Time: 9:00am-3:30pm
Cost: $3000
Send us a message or give us a call at 377-2467.
Want your business to be the top-listed Gym/sports Facility in Marabella?
Click here to claim your Sponsored Listing.
Click here to claim your Sponsored Listing.
Location
Contact the business
Telephone
Website
Address
#90 Union Road
Marabella
Opening Hours
| Monday | 08:00 - 17:00 |
| Tuesday | 08:00 - 17:00 |
| Wednesday | 08:00 - 17:00 |
| Thursday | 08:00 - 17:00 |
| Friday | 08:00 - 17:00 |