NTHU Racing - 清大賽車工廠

FSP 2026 🇵🇱｜0829｜Day 5

波蘭賽程迎來最終日。上午賽場天候驟變、雨勢不斷，原定的耐久賽被迫延後起跑，也讓現場氣氛一度緊繃。

然而面對挑戰，賽車依然穩定跑完全程，並順利通過賽後車檢！這一次，我們不僅彌補了德國賽留下的遺憾，更證明了團隊這一年來的堅持與韌性。

屬於我們的這個賽季正式畫下了最圓滿的句點。感謝所有一路相挺的贊助夥伴、師長與支持者，也感謝每一位並肩作戰的隊友——這趟征途，我們做到了！

帶著滿滿的收穫與成長，我們下個賽季見！

The final day in Poland brought heavy rain and a delayed Endurance event, but our car delivered a solid run and successfully cleared post-race scrutineering!

This finish made up for Germany and proved our team’s dedication all season long.

Huge thanks to our sponsors, advisors, supporters, and teammates. We did it!

See you next season!

FSP 2026 🇵🇱｜0828｜Day 4

波蘭賽第四天，萬眾矚目的動態項目正式開跑！

為了拿下動態賽的入場券，團隊一早便全力投入車檢，在順利通過所有項目後，隨即投入緊湊的動態賽程。

上午首先迎來直線加速與八字繞環。儘管現場路面抓地力偏低，加速表現未能完全重現先前在德國賽的水準，車手依然頂住壓力，穩穩繳出 4.03 秒的穩定成績！午後團隊也順利完成了計時賽賽事。

明日將迎來最終挑戰——耐久賽，期盼車況穩定、發揮實力，全力衝刺！

Day 4 in Poland, and dynamic events are finally underway!

We sailed through all the scrutineering checks and jumped straight into a packed schedule.

This morning kicked off with Acceleration and Skidpad. The track friction was pretty low, so while we couldn't quite match our FSG pace, we still laid down a super solid 4.03s run. We wrapped up the afternoon by completing Autocross without a hitch.

Tomorrow is the big one: Endurance. Fingers crossed for rock-solid reliability so we can give it everything we've got!

FSP 2026 🇵🇱｜0827｜Day 3

波蘭賽事正式進入第三天，當前首要目標是盡速通過各項車檢，確保能順利出戰所有動態項目。

早晨便傳來振奮人心的好消息——我們首次在歐洲賽事中挺進設計報告決賽，穩守前四強的席位！負責的成員隨後依據初賽評審的回饋迅速調整策略與簡報細節，全力備戰晚間的決賽。

車檢進度方面，車隊在上午順利通過傾斜測試與電池箱檢查，並正式進入電檢程序。

晚間長達兩小時的設計報告決賽中，隊員們各司其職、沉著應對，流暢解答評審針對車輛工程架構、設計理念及團隊組織能力的多方考驗。

期待明天動態項目登場，全隊齊心發揮最佳表現！

Day 3 of Formula Student Poland marked a major milestone for the team.

For the first time in our European competitions, we advanced to the Engineering Design Finals, securing a top-4 finish after defending our concept through an intense two-hour questioning session with the judges.

On the technical front, we successfully passed both the Tilt Test and Accumulator Inspection this morning, allowing us to proceed directly into Electrical Scrutineering.

We look forward to bringing this momentum into tomorrow’s dynamic events and delivering our best performance on the track!

FSP 2026 🇵🇱｜0826｜Day 2

波蘭賽第二天，除了持續進行車輛檢查，三項靜態賽事也正式登場。一早，我們順利通過機械檢查，讓團隊稍微鬆了一口氣，也為接下來的賽程爭取到更多準備時間。

今日第一個進行的靜態項目是商業報告。從德國賽一路走到現在，負責的成員根據評審回饋重新調整、升級了報告內容，希望這次能把我們的想法呈現得更完整。

下午，成本報告與設計報告接連登場。各技術組分別向評審介紹這一年多來的設計理念、開發過程，以及最終呈現在 TH11 上的成果。而就在設計報告進行的同時，我們也收到了一個令人振奮的消息——商業報告成功晉級決賽！

當晚，我們登上賽方的主舞台，繼去年捷克賽後，再次站上國際賽事的決賽。

結束一天緊張的賽事後，夜晚則是屬於各國文化的 Cultural Night。來自世界各地的車隊紛紛端出家鄉美食，讓整個會場變成一場小型的國際美食交流。我們也帶來了台灣的味道，邀請各國隊伍一起品嚐高粱、臭豆腐與鴨血，讓大家用最直接的方式認識台灣。

從賽道上的競爭，到夜晚的文化交流。這就是 Formula Student 最迷人的地方，我們因為賽車相遇，也因為文化而更了解彼此。

Day 2 in Poland. Scrutineering continued, and the three static events got underway. We cleared mechanical inspection in the morning — a small relief for the team, and more time to prepare for what came next.

First up was the Business Plan Presentation. Since Germany, the members running it had worked through the judges' feedback and reworked the whole thing, hoping to lay out our thinking more completely this time.

In the afternoon, the Cost and Engineering Design events ran back-to-back. Each sub-team presented a year and a half of design thinking, development work, and how it all came together on TH11. While the design presentation was still running, word came through: we had made the Business Plan finals.

That evening we went up on the main stage — our second international final since the Czech competition last year.

After a long day of competition, the night belonged to Cultural Night. Teams from around the world brought out food and traditions from home, turning the venue into a small international food exchange. We brought Taiwan: kaoliang liquor, stinky tofu, and duck blood curd — the most direct introduction to Taiwan we could offer.

Racing by day, culture by night. That's what makes Formula Student what it is. We came here for the cars, and leave knowing each other better.

FSP 2026 🇵🇱｜0825｜Day 1

波蘭賽正式進入第一天的賽事。今天的主要任務，是完成機械檢與電池箱檢。為了爭取有限的車檢名額，團隊一早便前往車檢區排隊，面對有限的時間與車檢機會，團隊持續確認車況、整理文件，並利用等待的時間再次檢查車輛，為下一次進場做好準備。

除了車輛檢查外，我們也完成了車手裝備檢查，並進行車手逃脫測試，確保車手在面對緊急狀況時，能夠在規定時間內順利離開車輛。

傍晚，來自世界各地的車隊齊聚賽道，在夕陽下完成全體車隊的大合照。當三十台賽車與來自各地的車隊站在同一片賽道上，也讓我們再次感受到，這場比賽正式開始了！

第一天還沒結束我們的挑戰，明天繼續。

The Poland competition officially entered its first day. Today's main tasks were to complete the Mechanical Inspection and Accumulator Inspection. To secure one of the limited scrutineering slots, the team headed to the inspection area early in the morning to queue up. Facing limited time and limited inspection opportunities, the team kept checking the car's condition and organizing documents, using the waiting time to go over the vehicle once more and prepare for the next attempt.

Besides the vehicle inspections, we also completed the driver equipment check and carried out the driver egress test, making sure our drivers can get out of the car within the required time in an emergency.

In the evening, thirty teams from around the world gathered on the track and took a group photo of all teams under the sunset. Seeing thirty cars and teams from all over standing on the same track made us feel it once again: the competition has officially begun.

Day one hasn't ended our challenge. Tomorrow, we continue.

FSP 2026 🇵🇱｜0824｜Day 0

結束德國的賽事後，我們沒有太多時間停下腳步。經過短暫的整理與調整，TH11 再次啟程，前往波蘭，迎接本賽季的最後一場國際賽事 Formula Student Poland。

一大早，我們從華沙市區出發，抵達賽場後，大家立刻投入營地的架設，將接下來幾天所需的裝備一一就定位。

傍晚時分，伴隨著夕陽，我們正式進入 Pit，從設備、工具到車輛，每一個細節都必須確認到位。因為從明天開始，這裡將成為我們與 TH11 並肩作戰的地方。

夜晚，賽場迎來熱鬧的 Welcome Party，各地的車隊齊聚一堂，也宣告著波蘭賽正式拉開序幕。雖然氣溫比想像中還要低，但這份寒冷擋不住我們最後一場比賽的熱情。

最後一戰，即將開始。

After the German competition, there wasn't much time to stop. A short reset, and TH11 was on the road again — heading to Poland for the final international event of the season, Formula Student Poland.

We set off from central Warsaw early in the morning. As soon as we arrived at the circuit, everyone went straight into setting up camp, getting everything we'll need over the next few days into place.

By evening, with the sun going down, we officially moved into the pit. Equipment, tools, the car — every detail had to be checked and in position. From tomorrow, this is where we'll be working alongside TH11.

At night, the paddock filled up for the Welcome Party. Teams from all over gathered together, marking the official start of the Polish competition. It was colder than we expected, but that didn't take anything away from our last race.

The final round is about to begin.

｜贊助商感謝｜— 源創立體科技股份有限公司

在賽車研發的緊湊時程中，將設計快速轉化為實體的能力是決定競爭力的關鍵。感謝源創立體科技提供專業的積層製造技術支援，協助車隊製作包含 PLA、碳纖尼龍等多種材質的 3D 列印件與模具。從空力套件、電控箱體結構到車上各處的細部構件，3D 列印打破了傳統加工的限制，大幅降低了組件重量與開發週期。這份支持讓團隊能在有限的時間內，針對各項關鍵系統進行多次迭代與測試，確保每一處細節都能以最輕量、精準的狀態呈現在賽道上。

源創立體科技由車隊校友林晏弘學長創立，深耕積層製造領域，從 3D 列印機台的開發，到碳纖尼龍、PETG、PLA 等多樣化工程材料的應用，都累積了完整的實務經驗。秉持對品質的堅持，源創立體近期更投入自動化線上服務系統的開發，以數位化轉型大幅提升製造效率。學長從車隊走向創業，對於團隊每一個賽季的開發節奏有著更深入的理解，這份支持因此格外貼近團隊實際的需求。再次感謝源創立體科技對清大賽車工廠的信任與支持，期待未來能持續攜手前進！

In race car development, the ability to turn a design into a physical part quickly is what keeps a team competitive. We sincerely thank Orinovate for providing professional additive manufacturing support, helping us produce 3D-printed parts and molds in a range of materials, including PLA and Carbon Fiber Nylon. From aerodynamic body components and electronics enclosures to smaller fittings throughout the car, 3D printing lifts the constraints of conventional machining and brings down both component weight and development lead time. That support allows our team to iterate and test key systems repeatedly within a limited schedule, so that every detail reaches the track in its lightest and most precise form.

Orinovate was founded by team alumnus Yen-Hung Lin and specializes in additive manufacturing, with hands-on experience spanning 3D printer hardware development and the application of diverse engineering mater

｜贊助商感謝｜— 模記齒輪工業有限公司

特別感謝模記齒輪在本賽季對清大賽車工廠的支持與贊助！本次模記齒輪協助我們製作齒輪箱內的行星齒輪組，以及轉向系統的傘齒輪。齒輪系統是賽車動力傳遞與操控表現的核心，從馬達輸出的高轉速動力，到車輛在彎道中的精準轉向，都仰賴高精度齒輪的穩定運作。有了模記齒輪在核心傳動零件上的支持與協助，我們得以讓整車系統順利運轉，持續向極限性能邁進。感謝模記齒輪成為我們在賽道上全力衝刺的重要後盾！

模記齒輪長期深耕於精密齒輪製造領域，專精於各式高精度齒輪加工與傳動元件設計，包含行星齒輪、傘齒輪及各式特殊齒形齒輪。在機械傳動系統中，齒輪是不可或缺的核心零件，而在高性能賽車中更是決定動力效率、可靠度與操控反應的關鍵。憑藉豐富的製造經驗與嚴謹的品質控管，模記齒輪為各類精密機械與工業設備提供穩定可靠的傳動解決方案，也讓我們的賽車能在高負載與極端賽事環境下依然維持最佳表現。模記齒輪不只是贊助商，更是我們逐夢賽道的重要夥伴。感謝你們的支持，讓清大賽車工廠能持續挑戰速度與工程的極限！

Special thanks to MODELMARK for supporting NTHU Racing this season! MODELMARK helped manufacture the planetary gear set in our gearbox and the bevel gears in our steering system. Gear systems sit at the core of a race car's power transmission and handling, and everything from the motor's high-speed output to precise control through a corner relies on high-precision gears running stably. With MODELMARK's support on these critical drivetrain components, our car can run as a complete system and keep moving toward the limits of its performance. Thank you to MODELMARK for standing behind us as we push hard on track.

MODELMARK has long specialized in precision gear manufacturing, covering high-precision gear machining and transmission component design, including planetary gears, bevel gears, and custom tooth profiles. Gears are indispensable to any mechanical drivetrain, and in a high-performance racecar they are decisive for power efficiency, reliability, and handling response. Backed by extensive manufacturing experience and rigorous quality control, MODELMARK delivers dependable transmission solutions for precision machinery and industrial equipment, and that same standard is what keeps our car performing under heavy loads and demanding race conditions. MODELMARK is not only a sponsor but a genuine partner in our journey on the track. Thank you for helping NTHU Racing keep pushing the limits of speed and engineering.

｜更多關於 模記齒輪｜
▲網站：https://www.modelmark.com.tw/

｜關於我們 More About Us｜
▲ 團隊官網：https://www.nthuracing.com/
▲ Youtube頻道：http://www.youtube.com/c/FSAENTHURacing清大賽車工廠

｜贊助商感謝｜— 晟鈦股份有限公司 Cheer Time

在學生方程式的研發中，所有電子系統的穩定度皆建立在高品質的 PCB 基礎之上。特別感謝晟鈦股份有限公司（Cheer Time）持續與清大賽車工廠並肩作戰，在第十一代賽車開發期間，持續提供高精度車用 PCB。今年團隊對電源管理系統（BMS）與電控單元（ECU）等模組進行升級，晟鈦的 PCB 以高製造精度與穩定性承載了這些複雜的電路設計，讓團隊在提升車輛效能的同時，也能維持系統在賽道嚴苛環境下的可靠度。這份長期支持，是我們能持續挑戰電子系統緊湊化與高效化的關鍵。

晟鈦股份有限公司專精於印刷電路板製造，擁有多項國際認證，包括多層板 UL、ISO 認證，以及最嚴謹的車用 IATF-16949 認證，並具備 HDI（高密度互連）生產能力。產品應用涵蓋 GPS、LED、數位監控、工業電腦等高科技領域。公司透過企業資源規劃系統與靈活的生產管理，建置出高效且即時的產線，以專業技術和嚴謹品管成為客戶信賴的長期夥伴。車規認證所要求的可靠度標準，也正是賽車電子系統必須具備的條件。再次感謝晟鈦六年來的信任與支持，期待未來能持續並肩前行。

In Formula Student, the stability of our electronic systems rests entirely on high-quality PCB foundations. We sincerely thank Cheer Time Co., Ltd. for six consecutive years of partnership with NTHU Racing, and for supplying automotive-grade certified PCBs throughout the development of our eleventh-generation race car. This year, as we upgraded our battery management system (BMS), shutdown circuit (SDC), and electronic control unit (ECU), Cheer Time's manufacturing precision carried these complex circuit designs, allowing us to improve performance while maintaining reliability under demanding track conditions. That long-term support is what lets us keep making our electronics smaller and more efficient.

Cheer Time specializes in PCB manufacturing and holds international certifications including UL and ISO for multilayer boards and the demanding automotive IATF 16949 standard, alongside HDI production capability. Its products serve fields from GPS and LED to digital surveillance and industrial computing. Through ERP systems and flexible production management, it runs an efficient, responsive line, earning trust through technical expertise and rigorous quality control. The reliability standards demanded by automotive certification are exactly what race car electronics need. Thank you again to Cheer Time for six years of trust and support.

｜更多關於 晟鈦股份有限公司 Cheer Time｜
▲網站：https://www.cheer-time.com.tw/

｜關於我們 More About Us｜
▲ 團隊官網：https://www.nthuracing.com/
▲ Youtube頻道：http://www.youtube.com/c/FSAENTHURacing清大賽車工廠