Walberg Precision LLC

Specializes in Long Range Precision Rifles, and Custom Machine work. I have an Associate's degree in Gunsmithing. I also hold several armorer certificates from several manufacturers.

Come see me at the Sioux Falls Gun Show if you are in town. Saturday 9-5, Sunday 9-3.

Come and check out the booth at the Aberdeen Gun Show at the DEC. Today 9-5 and Sunday 9-3.

Here is a build done for a customer getting into the PRS shooting. Impact action. Bartlien M24 Contour barrel chambered in 6mm Dasher. Triggertech Diamond trigger set at 1 lb. All that tucked into a Masterpiece Arms chassis with the vertical grip and all the adjustments you want. Customer already has the optic. I also chambered a second barrel so the customer will have a barrel ready to go when the first one gets shot out.

This build was done on a Rem 700 Left Hand. It is chambered in 220 Swift Ackley Improved. Action was blueprinted. Tactical bolt knob installed. External bolt release was installed. Bolt was fluted with a diamond pattern to match the barrel. Triggertech Primary trigger set at 2 lbs. The barrel is a Lilja cut to 20" and threaded with Diamond fluting. AG Composites carbon fiber stock. Pillar bedded with Titanium Devcon. Badger DBM bottom metal. Sitting on top is a Leupold VX-5HD 4-20x52. It was built on a long action to accommodate seating the long heavy bullets out passed what the short action magazine is capable of. Duracoating was done by Montstr Specialities. The red and grey was mixed to match the stock colors.

Just finished this full build. It started as a straight bolt Austrian Mauser 98. Bolt handle was cut and rewelded to allow for scope and threaded for bolt knob. Receiver was drilled and tapped to mount a Picatinny Rail. Action was blueprinted. Chambered in 257 Roberts with a Lilja barrel. Mcmillan A3-5 Stock in Coyote Ambush. Installed a Limbsaver recoil pad instead of the decelerator pad. DBM bottom metal to use standard AI mags. Aluminum pillar bedded. Timney trigger set at 2.5 lbs. Mounted a Burris Eliminator 3 on top. Duracoating was done by Montstr Specialties.

Come see me at the gun show in Rapid City, SD.

Here was a Rebarrel job. Rem 700 Blueprinted. Proof Research Carbon Fiber Sendaro 24" chambered in 300 Win Mag. Installed a Triggertech Primary trigger in it also.

This Build was an all out build. Curtis Axiom custom action. 20" Proof Research Carbon Fiber Barrel. Chambered in 22-250 Ackley Improved. Manners Elite Tactical Carbon Fiber stock. Hawkins Detachable Magazine Bottom Metal. Pillar Bedded using Titanium Devcon. Triggertech Diamond trigger set at 8 oz!

Here is a Rem 700 Bolt that I did the Sako Extractor modification on it. As you can see in the pictures of the original bolt face, the front of the bolt is cracked. So I machined the bolt to accept the Sako Extractor setup.

This build was a fun one. It is a Mauser 98. Blueprinted, Receiver was drilled and tapped for scope rail. Lilja barrel chambered in 264 Win Mag. Aluminum Pillar Glass bedding.

This build was a Rem 700 in 300 Win Mag. Blueprinted action, Proof Carbon Fiber barrel, Aluminum pillar bedded with full barrel channel bedded for rigidity, Tactical bolt knob installed, Muzzle brake timed and taper machined to match to barrel, Triggertech trigger.

Pretty basic job but I enjoy the detail in it. The customer wanted the pistol threaded, sight moved back, and a smooth protector. So I made it look like part of the barrel as best as I could.

Just finished up another rifle. This was a complete package build. The caliber is a 6.5-06 Ackley Improved. On top is a Burris Eliminator III. The barrel has diamond fluting. The metal is HK black with the diamonds left shiny so it stands out more. It has a McRee chassis and the grip was swapped out to the hogue. Not pictured but is included in my package builds is a Storm rifle hardcase.

Here is a Tikka T3 that I just rebarreled in 6mm Rem Ackley Improved with a Bartlien barrel. The extra picture shows how when I blueprint the action, the 1.200 barrel size fits flush to the receiver instead of having that step or needing to use a smaller barrel.

Here is a video showing how tight the threads fit to the action when I do a chamber job. As you can see there is no axial wiggle of the action.This was for a Tikka T3.

Machined an external bolt release into a Rem 700 action today. Another option that can be done.

Did some blueprinting on Remington 700 actions today. Got a notice that some barrels shipped today so getting these ready to go.

Aluminum Chassis Build

I decided that I would make a chassis for one of my builds that I am currently waiting on the barrel for.

I decided that I would make a chassis for one of my builds that I am currently waiting on the barrel for.

I did a little slide machining on a customer's Glock today. The two side cuts are machined to match each other. Had to stay away from the stampings but it turned out good.

Blueprinted Rem 700 Action

I have had people ask about what is all done when I blueprint an action. Every shoulder and bearing surface is recut so it is perpendicular to the bolt axis. I dial everything in down to the 0.0001 of an inch. That is 30 times more precise than the thickness of a piece of printer paper. I can do this to any action not just a Rem 700.

I have had people ask about what is all done when I blueprint an action. Every shoulder and bearing surface is recut so it is perpendicular to the bolt axis. I dial everything in down to the 0.0001 of an inch. That is 30 times more precise than the thickness of a piece of printer paper. I can do this to any action not just a Rem 700.

Aluminum Chassis Build

I decided that I would make a chassis for one of my builds that I am currently waiting on the barrel for.

I decided that I would make a chassis for one of my builds that I am currently waiting on the barrel for.

Machining Services

Here are some interesting machining services that include rebarrel work, threading muzzles, and much more

Here are some interesting machining services that include rebarrel work, threading muzzles, and much more

Custom Rifles

Custom Rifles

Machining Services

Here are some interesting machining services that include rebarrel work, threading muzzles, and much more

Here are some interesting machining services that include rebarrel work, threading muzzles, and much more

Tools

Tools

Threaded Bolt Knob

Threading bolt to accept different knobs.

Threading bolt to accept different knobs.

[01/29/19]   Hello Everyone, I finally started a page for my business to help show the cool things I do and build. I will keep posting pictures here soon. Thanks.

Walberg Precision LLC

Walberg Precision LLC's cover photo

Want your business to be the top-listed Gym/sports Facility in Aberdeen?

Click here to claim your Sponsored Listing.

Videos (show all)

Location

Telephone

Address


39296 129th St.
Aberdeen, SD
57401
Other Sport & Recreation in Aberdeen (show all)
Aberdeen Pheasant Coalition Aberdeen Pheasant Coalition
10 Railroad Ave SW
Aberdeen, 57401

The Aberdeen Pheasant Coalition (APC) is a group of local businesses and organizations working to raise $100,000 to be used to provide a sign up incentive for farmers and landowners enrolling land into the CRP program and public Walk In program.

East River Guide Service East River Guide Service
416 16th Ave NE
Aberdeen, 57401

East River Guide Serivce of South Dakota - Featuring Hunting and Fishing Trips

Richmond Lake and Mina Lake Recreation Areas Richmond Lake and Mina Lake Recreation Areas
37908 Youth Camp Rd
Aberdeen, 57401

Montstr Specialities Montstr Specialities
1603 S 7th Street
Aberdeen, 57401

Certified Duracoat finishing service for firearms, automotive, snowmobile, motorcycles, or hobby items. An extremely durable, versatile sprayed on finish.

Biegler's C&S Motorsports Biegler's C&S Motorsports
1502 6th Ave SW
Aberdeen, 57401

Biegler's C&S Motorsports is your local Yamaha, Kawasaki Powersports and Country Clipper Mowers Dealer. We carry a full line of factory and aftermarket accessories as well as specialize in powersports service work.

Fowled Up Outfitters Fowled Up Outfitters
2009 16th Ave SE
Aberdeen, 57401

Guide service dedicated to bringing sportsmen great opportunities to hunt and fish. "Putting you on the hunt of your life"

Hepper's Sport Center Hepper's Sport Center
501 N US Highway 281
Aberdeen, 57401

HuntFishSD.com -  South Dakota Hunting & Fishing HuntFishSD.com - South Dakota Hunting & Fishing
10 Railroad Ave SW
Aberdeen, 57401

HuntFishSD.com

Snow Boys Allowed Snow Boys Allowed
109 N. Washington St.
Aberdeen, 57401

This page is dedicated to the women of snowmobiling! Find the latest fashion for the female adrenaline junkies & meet other ladies who share your passion!

Storybook Land, Aberdeen South Dakota Storybook Land, Aberdeen South Dakota
2310 24th Ave NW
Aberdeen, 57401

Storybook Land is open for the season. Gift Shop, Concession and Ride Hours will vary depending on the time of season. Admission to Storybook Land and the Land of Oz is FREE!!! Ride Tickets are for $2.25 each or a punch card of 10 rides for $17.50.

Dakota Outdoors Dakota Outdoors
402 Main St N
Aberdeen, 57401-2838

Dakota Outdoors

The First Tee of South Dakota at Moccasin Creek CC & Lee Park GC The First Tee of South Dakota at Moccasin Creek CC & Lee Park GC
4807 130th St NE
Aberdeen, 57401

Location: 4807 130th Street NE Aberdeen, SD 57401 Phone: 605-226-0900 Website: www.thefirstteesouthdakota.org