Pedro's

Directions Website Contact the business

Pedro's Bicycle tools, l***s, cleaners, and accessories. We strive to bring our customers superior solutions to each task, from simple to complex.

We are committed to offering innovative, quality tools that last, and safe, high performance bike care that keep your bike running right, so you enjoy every ride. Quality, Innovation, and Customer Focus:

From the beginning, our philosophy has focused on quality, innovation, customer focus, grassroots support, and an easy-going attitude. Our tools are constructed employing the best materials available to give you superior performance and quality we are proud to back with a lifetime warranty. Designed and engineered in-house in the United States, our tool lineup offers true innovations that enhance the art of bicycle mechanics. We believe the right tools lead to better rides, safer rides, and more fun on every ride. Our bike care has led the way since 1989 with innovative lubricants, cleaners, and cleaning tools that make maintenance quick and easy. You won't find rebadged off-the-shelf formulas here. Our chemists have been innovating since day one with unique solutions engineered specifically for the task at hand. From formulas that were revolutionary in 1994, and still are today, to lubricants that perform at the highest levels using safe plant-based ingredients, we focus on offering solutions that not only make your bike run and look like new, but are safe for you, your family, and the environment. We believe the right bike care lead to better rides, safer rides, and more fun on every ride.

Quick link pliers make fast work of pesky or stubborn chain master links (especially with an assist from the Chain Check...
09/15/2026

Quick link pliers make fast work of pesky or stubborn chain master links (especially with an assist from the Chain Checker Plus II). The laser cut, heat-treated jaws feature a dual-function design allowing both installation and removal of master links. Cushioned grips provide comfort and control. Compatible with most 6-13 speed derailleur chain master links including SRAM® Eagle 12-speed and Flattop chains.

Our Demi Torque Wrench II & Bit Set is designed for left-hand or right-hand thread 3-15Nm torque settings required for c...
09/14/2026

Our Demi Torque Wrench II & Bit Set is designed for left-hand or right-hand thread 3-15Nm torque settings required for critical components such as handlebars, stems, and controls. The new design features an integrated bit holder for storage of 8 bits on the wrench for convenience and versatility and the small overall size and low profile head are perfect for tight spaces and easy handling. The Demi Torque Wrench II is quickly set using a micrometer-style dial and simple locking mechanism. Accurate to within +/- 4 percent. Includes custom tool roll for wrench and bit storage.

Included bits and adapters:
Hex: 2.5, 3, 4, 5, 6, (25mm), 4 & 5mm (50mm)
Torx: T10, T15, T20, T25, & T30 (25mm), T25 (50mm)
Crowfoot: 7 & 8mm Flare Wrench
Drive Adapter: 1/4″ square to 1/4″ hex
|
|
|

The 80g Pack Chain Tool fits anywhere but performs like a full size chain tool and doubles as a tire lever making it per...
08/28/2026

The 80g Pack Chain Tool fits anywhere but performs like a full size chain tool and doubles as a tire lever making it perfect for trailside repairs or a travel tool kit. The chain tool is made from high strength and long lasting alloy tool steel and fits 1-13 speed chains, including SRAM® Flattop, while the integrated tire lever handle features Pedro's proprietary plastic blend for unmatched strength & performance you can trust.

Functions:
> 1-13 speed chain tool
> chain hook
> 3.23, 3.30, 3.45, and 4.40mm spoke wrenches
> presta valve core tool
> quick link storage
> integrated tire lever handle


The new Disc Wrench II combines versatility and precision for work on hydraulic disc brakes. It features 7mm and 8mm fla...
08/26/2026

The new Disc Wrench II combines versatility and precision for work on hydraulic disc brakes.

It features 7mm and 8mm flare-style box wrenches, ideal for delicate hose fittings.

A new 1/4" square drive transforms it into a crowfoot for accurate torque application with a torque wrench.

Additionally, dual disc rotor truing slots (2.0mm and 2.3mm) offer precise adjustments.

Made from precision laser-cut tool steel, this compact wrench is built for durability and performance.

Tubeless tires and the use of tire liners has made removal and installation tougher than ever. Try these steps to get th...
08/25/2026

Tubeless tires and the use of tire liners has made removal and installation tougher than ever. Try these steps to get things rolling!

1. DEFLATE TIRE: Remove the wheel from bike and deflate tire completely.
2. PUSH BEAD TO CENTER: Rims have a smaller diameter in the center. Pushing the bead into the center reduces tension making removal easier. Starting 4-5 inches from the valve stem, work your way completely around 1st side of the tire pushing the bead towards the center of the rim. It may require high force to initially push the bead into the center.
3. INSERT TIRE LEVER UNDER BEAD: Using one tire lever, insert the tip of the lever under the bead of the tire at a point a few inches to one side of the valve stem.
4. PRY BEAD: Pry the bead of the tire over the edge of the rim by rotating the lever towards the center of the wheel.
5. SLIDE LEVER: With lever still prying bead over the edge of the rim, attempt to slide the lever along the rim. If unable to slide lever, move to step 6. If step 5 is completed, move to step 7.
6. TWO TIRE LEVER METHOD: If sliding lever is unsuccessful, try the following:
a) Remove tire lever and run fingers around bead again to ensure bead is at low
point in rim.
b) Using 2 tire levers, insert first lever under a few inches to one side of the valve stem. Leaving the first lever under the bead, insert the second lever under the bead on the opposite side of the valve stem.
c) Using both levers at the same time, carefully pry the bead over the edge of the rim as done with single lever. This technique spreads the force out over both levers and pulls a large section of bead off the rim.
d) Hook one lever onto a spoke, then follow step 5 above with the other lever to remove remaining bead.
7. REMOVE SECOND TIRE BEAD: Flip wheel to other side and attempt to remove 2nd bead using your hands only. The partially removed tire may allow easy removal of 2nd bead. If unable to remove 2nd bead using hands, repeat steps 2-6 as needed to remove 2nd bead.

The Pro Cassette Lockring Socket with Pin features a unique dual function design with 5mm pin and removable magnetic 12m...
08/23/2026

The Pro Cassette Lockring Socket with Pin features a unique dual function design with 5mm pin and removable magnetic 12mm pin, extra-deep precision machined splines for superior engagement, and quick-spin knurling provides speed and control. Use on your 3/8" drive Grande Torque Wrench or use with our new slim and trim 24mm Pro Socket Handle 3.0, just back from weight watchers, to remove stubborn lockrings requiring a little extra leverage.

Hold tight to CenterLock rotors with confidence. Even those ones that are even thinner 🤔🤪😎
08/22/2026

Hold tight to CenterLock rotors with confidence. Even those ones that are even thinner 🤔🤪😎


As drivetrains push the envelope chain tools must evolve to keep pace. The new Tutto Chain Tool II has done just that wi...
08/20/2026

As drivetrains push the envelope chain tools must evolve to keep pace. The new Tutto Chain Tool II has done just that with big updates, and small, including an updated main body, a new replaceable bridge, and updated bearing-backed pin with revised tip geometry for easier flashing removal.

The Tutto II was designed with season after season of professional service in mind featuring heat-treated tool steel construction for superior strength and lasting performance, and simple disassembly to make servicing and part replacement easy.

It features patented innovations in the Fit Dial and RPG and novel additions like the Peening Bit for Campagnolo® 11, 12, and 13-speed chain assembly, ergonomic set-back handle design, and Guide Pin Shear Slot.

These unique features make the Tutto II the most versatile chain tool available, compatible with almost any chain from single speed to 13-speed and beyond.

The original Pedro's Chain Keeper has been a favorite in the wash buckets of mechanics for decades. The Pro Chain Keeper...
08/19/2026

The original Pedro's Chain Keeper has been a favorite in the wash buckets of mechanics for decades. The Pro Chain Keeper carries this heritage forward to new levels featuring one-handed installation, shifting across all gears, professional duty stainless-steel and aluminum construction, a heavy-duty solvent resistant plastic pulley, and 12mm thru axle compatibility.

Our Pro TL II wrenches feature an updated handle shape with slimmer profiles and full long-leg coverage for enhanced com...
08/18/2026

Our Pro TL II wrenches feature an updated handle shape with slimmer profiles and full long-leg coverage for enhanced comfort and control, improved tip clearances, easy-to-read size markings, and color bands for quick identification. The set is housed in a custom storage pouch and includes hex and torx sizes used day in and day out; 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches, and T10, T25, and T30 torx wrenches. Each wrench is crafted from premium S2 tool steel to ensure the strength and lasting performance. Extra length on each leg of the wrench offers better leverage and easy access to hard-to-reach bolts.
|
|
|

Address

Boston, MA

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Alerts

Be the first to know and let us send you an email when Pedro's posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Pedro's:

Shortcuts

Share