Cascade Rifles & Gunsmithing

Cascade Rifles & Gunsmithing Gunsmith able to perform general repair and cleaning, private transfers, and new and used sales.

07/05/2026
Wishing everyone a safe 4th of July. We started the celebration today by being in the parade
07/05/2026

Wishing everyone a safe 4th of July. We started the celebration today by being in the parade

Another Re*****on speedmaster 552 in the door for a light refresh, been in the guys family for a long time. We'll get it...
06/27/2026

Another Re*****on speedmaster 552 in the door for a light refresh, been in the guys family for a long time. We'll get it going for him again.

Browning X-bolt 2 in 6.8 western all set up for a trial run to see if it's coming to deer/elk camp this year. If it's a ...
06/27/2026

Browning X-bolt 2 in 6.8 western all set up for a trial run to see if it's coming to deer/elk camp this year. If it's a keeper it will get a better scope down the road but the vortex will work for now.

Superlite barrel swapped to T3, headspace checked. Cleaned up and ready to go for the customer!
03/08/2026

Superlite barrel swapped to T3, headspace checked. Cleaned up and ready to go for the customer!

Swapping a Tikka superlite barrel onto a customer's lite. Both spun off with little fuss and no marks were left that nee...
02/28/2026

Swapping a Tikka superlite barrel onto a customer's lite. Both spun off with little fuss and no marks were left that need to be cleaned up. One of these actions has a barrel chambered in 35 Whelen in it's future...

Congratulations Chad! Chad completed AGI’s 1911 pistolsmith course and is now certified. Come see us for your 1911 needs...
07/12/2025

Congratulations Chad! Chad completed AGI’s 1911 pistolsmith course and is now certified. Come see us for your 1911 needs.

Installed a new grind to fit recoil pad on my personal Savage 99 in place of the poorly fit, very hard old one. I'm look...
02/15/2025

Installed a new grind to fit recoil pad on my personal Savage 99 in place of the poorly fit, very hard old one. I'm looking for more experience with these, I'll do the next 3 for cost of parts only.

Just finished an older savage 111 in 7mm Rem mag. Refinished the stock after steaming out some dents. Did a little bluin...
08/04/2024

Just finished an older savage 111 in 7mm Rem mag. Refinished the stock after steaming out some dents. Did a little bluing touch-up, has a fresh recoil pad and a one piece scope base. Almost ready for a new home!

Just finished installing night sights and ambidextrous safety on a Kimber ultra carry II.
07/28/2024

Just finished installing night sights and ambidextrous safety on a Kimber ultra carry II.

Address

Estacada, OR

Website

Alerts

Be the first to know and let us send you an email when Cascade Rifles & Gunsmithing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category