T & A Motorsports

Last night we raced at Tri-State Speedway with the 247 car with Dylan behind the new Superior Steering Wheels. And we also had our new set of AFCO Racing Shocks by RACE Shock Service
We fought overheating problems last time we raced so I spent the last few weeks going over things..put a new radiator in the car..made some modifications to my radiator screen so that all air that enters has to go through the radiator. Thought i had things good to go. Went out for the heat race and started 8th and finished 5th but came in and the car was at 235 degrees.
Pulled a plug and it was showing too much timing so we backed it off some for the feature. Went out for the feature and started 9th and after a couple of laps there was a caution and it ended up a very long caution and the temperature started climbing during it so Dylan decided to just pull it in and not risk it not coming back down once they went green again.
Tri-State is off this coming weekend so I am going to go over more things on the car to see if I can figure the overheating problem.
I (Taylor) also want to apologize to my drivers Dylan & Brian Williams and to all of the ones that make up our crew for not being able to provide cars good enough for them to do their job on the track since the Spooker last October.
Im starting to doubt my ability to get them front running cars ☹️

I want to thank the ones that continue to be a part and support our racing team

KRC Power Steering
Webb Auto Remarketing ( Scott Tricia Webb )
JRT Trucking Inc.
SG Performance Carburetors
Welch's Rods and Racing
Schoenfeld Headers
Williams Signs & Designs
Wheeler Metals
Kustom K*t Lawn Care
Bryke Racing
Midwest Automation and Custom Fabrication
Race Shock Service
Trick Fab
KR Performance Fuels LLC
D&D Construction
Maxima Racing Oils
Superior Steering Wheels

Photo credits to Hannah Willet

New radiator..new fan shroud..Gorsuch says fan in the shroud..i have the bottom and both sides blocked off so all the air that passes through the screen has to go through the radiator..hopefully this helps out

Brian Hicks Photography got a shot of me watching as Dylan was leading the A Feature at Tri-State Speedway last Saturday night

So for the ones that voted on our post a cpl weeks ago about the color. This is what your were deciding on. Another new Superior Steering Wheels for the Dylan Scott Reynolds number 247 car. I believe this is our 15th wheel since we started our racing program with the micros back in 2019. Only wheels I will run on my cars.

We get all of our aluminum sheets through Wheeler Metals .
They are a racing family and we fully believe in racers supporting racers

4' x 10' Aluminum sheets in stock at Wheeler Metals.

- .040 thickness
- 2 sided colors
- Great for signs, trailers, shops, race cars, fabrication, and custom projects

Muskogee, OK: 918-682-1083
Rogers, AR: 479-986-8736
Springfield, MO: 417-862-5291