KGCB KG's Custom Bowstrings

to assure the servings are tight and will not separate. Without mentioning any names, I recently purchased a new bow. I pulled it back 3-4 times just to test the draw weight of the bow. The serving unraveled near the bottom cam. Needless to say I had to re-serve the string and hadn't fired one shot out of the bow. What can you expect when strings are being mass-produced by the larger companies by a machine. I've been shooting for approximately 35 years. I've shot for Hoyt USA, Alpine, Clearwater-Storm, Mathews Bows, Custom Shooting Systems and now Martin Archery. It doesn't matter on how much they praise their bows. It all depends on the string and cables on the bows. The string must be tuned along with the cables to obtain maximum efficiency from the bow. This also reduces noise. With my new innovation in string making will get the most out of your bow. Whether its 3D or bow hunting, this is the string for your bow. THE CHOICE OF A WINNER! I use the finest materials to make my strings and cables. I use BCY materials. I fully pre-stretch all strings up to 90 inches for a 24hr period at a high torque that equals the constant pull a bow places on the string. By doing so this eliminates peep rotation. My patented G-Twist, I incorporate on every string at the ends to prevent the string or cable(s) from separating and causing the bow string to fail. The string ends are woven into the string, which reinforces the end servings so no failure of the string or cables will occur. As we know this is one of the main areas where failure of the string and cable(s) will occur. Without giving you more information on my trade secrets of making strings. The new G-Twist! A string you must have on your bow. You will pay up to $100.00 or more from some of the top manufacturers of bowstrings. None offers this quality of string or cables. Lets face it. How many times have you been disappointed with a string you purchased that promised you no string stretch, and later to learn the string stretched over an half inch or more. Of all the strings I've made for customers. The most that was reported to me was 1/16 of an inch string stretch. His bow was maxed out at 90 lbs.That shows the quality of my strings. In addition to my custom bowstrings, I offer custom built strings puffs to enhance the colors of your string. My string puffs will not slow the speed of your bow, but will silence the vibration of your string. Try plucking your string pryor to installation of the string puffs. Once installed again pluck your string. You will notice the reduced vibration of your string. Plus they look great. For placing orders of my Custom Bowstrings or Custom String Puffs. Call 717-756-3631, or e-mail: [email protected]