Powertek

09/18/2018

https://www.powertekuk.com/phasemeter

SD1000 phase meter for measurement of phase angle, precision phase angle meter with voltage and current inputs, isolated inputs

08/22/2018

https://www.powertekuk.com/iprobe-ip520

I-Prober 520 Non clamp current probe suitable for measurement of ac and dc currents in pcb tracks, PCB track touch & measure and high bandwidth.

07/06/2018

https://www.powertekuk.com/coaxial-shunt

These non inductive high frequency coaxial shunts allow measurement of electrical current from DC to 100s of MHz, practically eliminating phase angle uncertainty. Often called current viewing resistors or CVRs, they are used for extending the current range of power analyzers, high speed power electronics and RF power applications.

The Series A range are non inductive high frequency current coaxial shunts designed to operate over a wide bandwidth, with both AC and DC power systems, especially where phase angle is a consideration.

06/11/2018

Our New PAV1010A Phase Angle Voltmeter is developing well, especially for those needing to measure phase angle AND voltage amplitude

12/04/2017

Powertek's new PAV1010A Phase Angle Meter

Features:
- 5mV to 500Vpk range
- 2 galvanically isolated channels
- 0.5Hz to 140kHz, 500kHz with external
- All PAV measurements including ratios
- Null meter, waveform display and THD
- Wattmeter and power factor option

For more information please visit:
https://powertekuk.com/pav1010a-pav-phase-angle-voltmeter.html

Phase angle voltmeter PAV1010A, PAV, Total Vrms, fundamental, quadrature, phase angle, null meter from Powertek

11/13/2017

Powertek's PA2553 Three Phase Power Analyzer

Product Features:
- Measures and displays power, frequency, harmonics, THD, CF, K-Factor, Triplens and Inrush
- Up to 1500 volts peak, 40amps peak internally and up to 10,000 amps with the use of External Current Transducers
- DC and 20mHz - 80kHz Frequency Range
- Graphics Display shows numerical results, waveforms bar graphs and history plots
- PCL/Test printer output, IEEE488 interface included
- A 200ms to 10-Day historical logging feature
- Built in supply for Hall Effect CT's
- Transducer applications
- 6-key front panel has four soft keys with toggle menus

For more information please visit:

Powertek's PA2553 three phase power analyzer with harmonics

11/08/2017

Powertek's CWT and CWT LF Wideband current probes for high frequency high current measurement

Product Features:
- Bandwidth 1Hz to 16 MHz (see bandwidth spec for each model)
- CWT LF models available with extended LF bandwidth

Our range of CWT current probes consists of wideband, high frequency, current sensor, rogowski coil, current sensor, transducer, flexible core

10/30/2017

Introducing Powertek's UPC Three Phase Power Sensor for Measurement of kW and HP of AC and DC motor loads

Product Features:
- Measures kW
- Pump or Fan Flow
- Mixture Viscosity
- Optimum Feed Rate
- Tool Condition
- Beginning of End Process
- Obstructions
- Overload
- Loss of Load

For more information please visit:

Shunts suitable for ac and dc currents, insulated, current shunt, coaxial, high frequency, non-inductive and high bandwidth

10/18/2017

Powertek's PA2801 and PA2802 Wattmeters
Single Phase Power Analyzers, 1 or 2 channels

Features:
- Accurate with all AC/DC waveform types
- High performance-to-cost ratio
- Measures, W, VA, VAr, V, A, PF crest factors and harmonics
- Base accuracy

PA2801 and PA2802 single phase power analyzers, 1 or 2 channels, wattmeter energy star functions AC/DC appliance testing and harmonic analysis

10/11/2017

Check out Powertek's Product Range of Differential Voltage Probes

Features:
- Supplied with input cables and probes
- Supplied with carry case
- Depending on model, supplied with battery and psu

For more information please visit:

Differential voltage probe, oscilloscope differential isolation, oscilloscope isolation, allowing isolated and floating measurments with oscilloscopes