AntTech Airsoft Studios

APS UAR…. All in all it was actually pretty straight forward considering it’s just an AK internally! Still, not a build I’d recommend for beginners!

I actually built this a while ago, but didn’t post it for some reason. Well, it came back to have the battery connector re-routed to the mock PEQ on the top rail!

- Retro Arms V3 Shell
- Retro Arms V3 Motor Cage
- Jefftron V3 Leviathan
- Paragon Armory Short BLDC Motor
- Retro Arms AK HopUp
- AntTech TDC Rotary Kit for RA AK HopUps
- PDI 6.01 360mm Barrel R-Hopped
- Elvish Tac Patch
- EMG Atlas Bucking
- Modify Flat Nub
- Prommy J-Cage Bearings
- Rocket 13:1 ss3t
- AntTech High Speed Delay Chip
- ASG ARL
- Airsoft Mutations Jaeger Prime Piston
- FPS AOE POM Piston Head
- FPS “D” Cylinder
- FPS x Brill Cylinder Head
- EPeS 19.8mm Nozzle
- Retro Arms V3 Tappet
- AntTech Improved Tappet Spring
- Guarder SP-120 Spring
- Misc OEM AK Selector Plate & Components (The APS ones were of course very off spec!)
- PTS EPM-1 Short (Decorated for LARP)

CYMA DD MK18 Brushless |

- Retro Arms VFC Spec Shell (Yes, it fits and is totally tunable for alignment!)
- Jefftron Leviathan V2
- Solink Advanced Plus 31k
- JVAN 13:1 (ss 3t from pickup)
- AntTech High Speed Delay Chip
- JVAN Pinion
- FLT 8mm Bushings
- Real Deal Piston
- ASG POM Piston Head
- Real Deal Cylinder
- FPS x Brill Cylinder Head
- Real Deal Tappet Plate
- EPeS 20.7mm Nozzle
- AntTech Improved Tappet Spring
- ASG ARL
- Guarder SP-120 w/ 5mm Spacer
- Maxx M4A
- Custom Fit Inlet Adapter
- PDI 6.05 303mm R-Hopped
- Elvish Tac Patch
- Maxx Concave Nub
- PTS EPG
- AntTech Rear Alignment Spacer for RA Shells to CYMA Platinum Receiver

A&K PKM Turned PKP-M 6P41M | Brushless, Full Send

- BullGear CNC SAW Gearbox Shell
- Solink V5 (30k, 70%)
- AntTech Flat Faced Endbell Cap for Solink Motors
- Solink REVISED 18:1 Full Helical (ss 3t from pickup)
- AntTech Delay Chip
- FLT 9mm Bushings
- New Switch
- Jefftron MOSFET II wired with AlphaWire EcoWire, coated in thick layer of silicone conformal coating, inside of sealed heatshrink
- LCT OEM FMR Piston (Long Story)
- FPS Softair AOE POM Piston Head
- FPS Softair Full Cylinder
- FPS Softair x Brill Cylinder Head (Very Based)
- EPeS 20.7mm Nozzle
- Retro Arms V2 Tappet Plate, modded fin profile
- AntTech Improved Tappet Spring
- ASG ARL
- Guarder SP-130 Spring
- Retro Arms M249 Spring Guide
- BullGear PKM HopUp
- Amped PDI 6.05 375mm Inner Barrel (R-Hopped)
- Elvish Tac Patch
- EMG Atlas Bucking
- BullGear PKM Box Mag Insert “Automatic” Feed Version
- Custom Printed and Built “PKP-M (6P41M) or PKZT Short Barrel for A&K PKM” Designd by JOMARRE (Cult 3D). Printed in PETG-CF, and modified to replace the plastic muzzle threads with a manually machined melt-threaded in metal 14mm CCW muzzle thread adapter.
- Custom Printed and Built “PKZ Stock (A&K PKM)” Designed by FSBALPHA (Cult 3D)
- AntTech Custom Fabricated parts to solidify the entire front GasTube Assembly

Review of Solink’s new prototype NGRS Gears!

TLDR: Excellent Gearset, no issues with Bevel spec, but my specific sample set had a couple of defects that aren’t reflected in any other Gearset I have used from Solink. Other testers have also reported to not have the same defects in their samples as I had. Despite the small defects in my sample set, they shimmed up and run beautifully!

When these are finished and released, these will be my go-to for every NGRS Build.

New Video Dropped! Check it out on YouTube!

New YouTube Video Dropped! Fine Tuning | Maxx Hop Conversion Kits

This video covers all of the basic tuning parameters when installing a Maxx Hop, whether it’s a conversion kit or not!

Unusual Repairs | King Arms Gr***de Launcher

This guy came in with a very stuck latch. It couldn’t open. I disassemble the whole thing to find the issue is a broken arm attached to a cam on the underside of the latch. I cutoff the arm shaft, used the lathe to make a new one with threads at the end, drilled and Tappet a hole in the arm connector. What was one a broken pot metal rod is now a fastened steel rod. I also went ahead and polished some of the latch components to make it a bit easier to open/close.

End result, it opens, closes, and fires!