Luxon MX

Luxon - Motocross Products Engineered for Performance

Operating as usual

Photos from Luxon MX's post 08/28/2021

Off to a good start for @teamprmx in the @triplecrownseries SX series: @tylergibbs146 goes 1-2 in 250 and @caseykeast takes 4-3 in the 450 class. Our red GasGas triple clamps are looking pretty good with that red number plate!

#Supercross #Motocross #TripleClamps #MadeInUSA #GasGas #GetOnTheGas

Photos from Luxon MX's post 08/21/2021

We’re doing special anodize runs of all our triple clamps in “Kashima” bronze, “raw” clear anodize, and @ClubMX blue colors. Clamps are electropolished prior to anodize for that extra shine. If you want a set, pre-order on our website and type Bronze, Silver, or ClubMX Blue in the customer notes section of the shopping cart. These special runs of clamps will ship in 4-6 weeks. This is a limited opportunity and we may not run these colors again for quite a while, so get on it while you can!

#MadeInUSA #Motocross #Supercross #TripleClamps #Yamaha #twostroke #2stroke #BluCru #Honda #RideRed #Kawasaki #TeamGreen #GasGas #GetOnTheGas #KTM #Husqvarna #Engineering #Optimized #GenerativeDesign #FEA

Photos from Luxon MX's post 07/24/2021

Are you a Yamaha 2-stroke fan? We’ve got you covered! Triple clamps and ignition/clutch covers are in-stock and ready to ship now. The clamps are a major upgrade: they drop nearly a pound of weight, feature our anti-twist rubber mounts for reduced vibration, have a 22mm offset for sharper cornering, and are split for plush suspension action. And our billet aluminum covers give your bike that factory look and increased strength without adding a bunch of weight. Custom laser etching is available too. All engineered, designed, and made in the USA. Check out our website for all the details.

#Yamaha #twostroke #2stroke #BluCru #TripleClamps #Supercross #Motocross #MadeInUSA #Performance #Engineering #GenerativeDesign

Photos from Luxon MX's post 07/17/2021

There’s no such thing as a “one size fits all” performance link. Every rider is different: different weights, heights, skill levels, bike setup, etc., and each will benefit from a different length linkage arm. That’s why we’ve made our pull-rods adjustable. If you try one length and don’t like it, all you have to do is adjust it and try again until you find a setting that works well for you. Honda and KTM/Husky/GasGas all in stock now, other brands and 2021+ Honda 450 are in the works!

#Motocross #Supercross #Engineering #Suspension #Linkage #Honda #RideRed #GasGas #Husqvarna #GetOnTheGas #KTM #ReadyToRace #husqvarnamotorcycles #MadeInUSA

Photos from Luxon MX's post 07/10/2021

New products! We just wrapped up a few new items available now: Billet CNC oil filter covers for most 09+ Austrian four strokes and bar risers for Luxon MX triple clamp bar mounts (risers also fit stock KTM and Husqvarna rubber-mounted bar mounts). Check out the website for pricing and all the details.

#Motocross #Supercross #GasGas #GetOnTheGas #KTM #ReadyToRace #husqvarnamotorcycles #MadeInUSA

Photos from Luxon MX's post 07/03/2021

With the racing at Red Bud today and the Fourth of July coming up, it seems appropriate to show off our Made in USA Honda triple clamps in Red, White, and Blue! “White” is really electropolished clear anodize, but close enough!

#MadeInUSA #Motocross #Supercross #Honda #RideRed #TripleClamps #Engineering #Optimized #GenerativeDesign #FEA

Photos from Luxon MX's post 06/19/2021

We’ve been making lots of chips in the machine shop lately. Many of the parts that are out of stock will be available again soon, plus a few new ones!

#Motocross #Supercross #KTM #Husqvarna #GasGas #ReadyToRace #CNC #MadeInUSA

Photos from Luxon MX's post 06/08/2021

Snuck away to @cahuillamx for a private ride day last week with some good friends. Always a good time riding Cahuilla with your buddies, and there was a lot of Luxon represented as well! 1st 📸 @197steve

#Motocross #TripleClamps #MadeInUSA #Engineering

Photos from Luxon MX's post 05/29/2021

@phil_nicoletti and @clubmx are putting the Luxon MX triple clamps through their paces in the premier class today @foxraceway @promotocross.

#Motocross #Yamaha #BluCru #TripleClamps

Photos from Luxon MX's post 05/29/2021

Who's ready for some racing?! Here's @stankdog726 representing us in the 250 class today @promotocross

05/16/2021

@baronaoakssportscenter is prime today!

@baronaoakssportscenter is prime today!

Photos from Luxon MX's post 05/01/2021

One of our customers wanted some custom red Kawasaki triple clamps. What do you think about red on a Kawi? And if you’re disappointed that these are for a Kawi, don’t worry, red Honda clamps are coming next week!

#Supercross #Motocross #Kawasaki #TeamGreen #TripleClamps #MadeInUSA #Engineering #Optimized #GenerativeDesign #FEA

Photos from Luxon MX's post 04/07/2021

The back and bottom sides of our parts often aren’t visible when the parts are installed, and they’re usually not shown in our product photos. But that doesn’t mean we skimp on those details. Swipe ➡️ to check out the rarely seen side of a few of our parts.

#Supercross #Motocross #TripleClamps #CNC #Billet #Details #MadeInUSA #Engineering #Optimized #GenerativeDesign #FEA

04/04/2021

Felt good to get some moto therapy today. Back at it tomorrow, though, Gen2 Honda clamps are on the CNC!

Felt good to get some moto therapy today. Back at it tomorrow, though, Gen2 Honda clamps are on the CNC!

Photos from Luxon MX's post 03/21/2021

Our long awaited Honda triple clamps are getting closer… Stronger, yet much lighter than stock, with increased torsional stiffness for cornering precision, and more longitudinal compliance for comfort and smoother suspension action. Choose from 1 1/8” bar mounts or @renthal_moto Fatbar36 mounts. Available soon!

#Supercross #Motocross #Honda #RideRed #TripleClamps #MadeInUSA #Engineering #Optimized #GenerativeDesign #FEA @tilubehondaracing @jwr_honda_racing

Photos from Luxon MX's post 03/14/2021

Check out these detail photos of our Kawasaki Gen2 triple clamps that @teamprmx is running in @amasupercross. These clamps are 0.85 pounds lighter, yet stronger than stock. They’re stiffer in torsion for steering precision, but the split design is more compliant front to back for more comfort and feel reducing suspension binding. The 21.5 mm offset sharpens the steering and really wakes up the handling of the Kawasaki. Pre-orders drained our stock, so we only have a couple left, but more are in the works. Get your orders in now to secure a set as soon as possible! Available in both green and black with bar mounts for either 1 1/8” or @renthal_moto Fatbar36 size for the ultimate performance combo.
 
#Supercross #Motocross #Kawasaki #TeamGreen #TripleClamps #MadeInUSA #Engineering #Optimized #GenerativeDesign #FEA

Photos from Luxon MX's post 02/20/2021

Our Gen2 Yamaha triple clamps feature improved handling, comfort, and strength over stock, while saving nearly a full pound (420 g) of weight! And our anti-twist bar mounts eliminate twisted up bars from a minor tip-over. Titanium fasteners come standard and they’re in stock and ready to ship for your YZ125, YZ250, YZ250F, or YZ450F.
 
#Yamaha #BluCru #TripleClamps #NoDrillingRequired #Supercross #Motocross #MadeInUSA #Performance #Engineering #GenerativeDesign #FEA

Photos from Luxon MX's post 02/11/2021

@teamprmx has great momentum with some solid finishes in Supercross lately. Both @simonson_70 and @lukeneese125 finished top ten in the 250 class and @cadeclason made another 450 main-event in a stacked field! Congrats guys and keep it going! Our Kawi triple clamps are on the CNC right now and pre-orders will be ready to ship soon. Check out the website for all the details!
 
#Supercross #Motocross #Kawasaki #TeamGreen #TripleClamps #NoDrillingRequired #MadeInUSA #Engineering #Optimized #GenerativeDesign #FEA

Luxon MX updated their website address. 02/07/2021

Luxon MX updated their website address.

Luxon MX updated their website address.

Photos from Luxon MX's post 02/07/2021

Today was a good day. We got to get the bikes dirty and test some product. And now we're ready for some good supercross racing!

Photos from Luxon MX's post 01/27/2021

2021 Honda development starts now!

#Motocross #Supercross #Honda #RideRed

Photos from Luxon MX's post 01/23/2021

Our red triple clamps are looking good for your new GasGas! We’ve got black too if you want something a little more subtle. Or you can run orange or blue if you’re looking for something a little different; KTM, Husqvarna, and GasGas clamps are all the same fitment.

#Motocross #Supercross #GasGas #GetOnTheGas #KTM #Husqvarna #TripleClamps #MadeInUSA #Engineering #Optimized #GenerativeDesign #FEA

01/14/2021

We just wrapped up our pre-production run of Kawasaki triple clamps and initial feedback is very positive. These clamps feature a 21.5mm offset for improved handling, a split lower clamp for better suspension action and more comfortable ride, anti-twist bar mounts, and weigh in at 357g (0.85 lbs) less than stock! Our production clamps will be offered in black and green anodized finish and will be shipping soon; pre-orders are available now on our website!

#Motocross #Supercross #Kawasaki #TeamGreen #TripleClamps #MadeInUSA #Engineering #Optimized #GenerativeDesign #FEA

We just wrapped up our pre-production run of Kawasaki triple clamps and initial feedback is very positive. These clamps feature a 21.5mm offset for improved handling, a split lower clamp for better suspension action and more comfortable ride, anti-twist bar mounts, and weigh in at 357g (0.85 lbs) less than stock! Our production clamps will be offered in black and green anodized finish and will be shipping soon; pre-orders are available now on our website!

#Motocross #Supercross #Kawasaki #TeamGreen #TripleClamps #MadeInUSA #Engineering #Optimized #GenerativeDesign #FEA

01/05/2021

What do you think of these all-black clamps ready for the @mxrevival Project Disruptor build? Custom laser etching adds the finishing touch on these Gen2 Yamaha two-stroke split clamps.
 
#Yamaha #BluCru #TripleClamps #Supercross #Motocross #MadeInUSA #Performance #Engineering #GenerativeDesign #FEA

12/25/2020

Just got this lot of black clamps back from the anodizer. Monday we will laser etch these, then assemble, and ship out the KTM/Husky/GasGas and Yamaha orders that are currently back ordered! Other colors coming soon, followed by Kawasaki, then Honda. It's a busy end of the year!

12/23/2020

If you’re upgrading to the Renthal Fatbar36 to drop some weight from your bike, don’t bolt them up with some heavy bar mounts! Our anti-twist mounts are lightweight, yet strong, and prevent twisted up bars after a tip-over. CNC machined in the USA and Titanium hardware is included standard. Available for all major brands and also available in standard 1 1/8” size.

#Motocross #Supercross #FatBar36 #Engineering #Optimized #GenerativeDesign #MadeInUSA #Kawasaki #Honda #Yamaha #Suzuki #KTM #Husqvarna #GasGas #Kawi #BluCru #RideRed #RMArmy
#GrabLifeByTheBars

12/09/2020

What do you think about Monster Green Yamaha triple clamps? Don’t worry, we’ll have blue and black clamps available too!

#Yamaha #BluCru #TripleClamps #MonsterEnergy #Supercross #Motocross #MadeInUSA #Performance #Engineering #GenerativeDesign #FEA

11/26/2020

The latest Yamaha triple clamp prototypes are ready to hit the track for some testing!

#Yamaha #BluCru #TripleClamps #Supercross #Motocross #MadeInUSA #Performance #Engineering #GenerativeDesign #FEA

11/25/2020

It's time for our annual holiday sale for Black Friday/Cyber Monday. This year we're offering 20% off on srlect product by applying promo code 2020 in the shopping cart. Click the link in our bio to visit our Black Friday page for all the details!

11/23/2020

Fresh off the CNC: three different Yamaha triple clamp variations for testing.

11/16/2020

It's desert season! Let's hope it rains out there soon for some epic conditions.

11/02/2020

Blue, Orange, Black, and Clear anodized Gen2 KTM/Husky/GasGas triple clamps are all currently in-stock and ready to ship! We’ll be running a batch of red next round to be ready for the new GasGas bikes as well. Swipe ➡️ for more

#Motocross #Supercross #KTM #Husqvarna #GasGas #TripleClamps #MadeInUSA #Engineering #Optimized #GenerativeDesign #FEA

11/01/2020

Some new colors just in time for Halloween! Orange and black Gen2 KTM/Husqvarna triple clamps are in stock and ready to ship! (We have blue too, but they didn't go with the Halloween theme.)

#Halloween #KTM #Husqvarna #Motocross #Supercross #TripleClamps #MadeInUSA

10/21/2020

We’ve had lots of requests for Kawi clamps... Here’s a rendering of the initial design; they’re still a ways out, but we’re working on it! ETA is December, just in time for supercross.

#Motocross #Supercross #Kawasaki #TeamGreen #TripleClamps #MadeInUSA #Engineering #Optimized #GenerativeDesign #FEA

10/10/2020

We didn’t spend a few hours copying the KTM factory clamp design like one of our competitors… Luxon MX was the first company to apply generative design to motocross triple clamps over seven years ago. And our Gen2 triple clamps are the result of thousands of hours of real engineering, testing, design, and analysis. Lighter, yet stronger than the KTM factory clamps, our Gen2 clamps are stiffer in torsion for more steering precision, but more compliant longitudinally for rider comfort. The split lower clamp smooths the suspension stroke for plusher action, and our anti-twist bar mount fixes the stock bar mounts problems. Titanium fasteners are included standard. ➡️ Swipe right to see details!

#Motocross #Supercross #KTM #Husqvarna #GasGas #TripleClamps #MadeInUSA #Engineering #Optimized #GenerativeDesign #FEA

Videos (show all)

A quick data acquisition test and a sneak peak at our test rig in development. Plus some Notorious B.I.G. Mixed with Sin...
Knocking out some testing at Pala today. New parts in the works!
Great day for some Supercross!
Running the final setups on this batch of clamps, avaliable soon!
In-process inspection is just one of many details increasing the quality of our triple clamps.
Our advanced engineering software reveals the optimal material layout for our products. Check out our website for more i...
A short clip of our accelerometer datalogging from over the weekend. Good data makes for good engineering!

Location

Products

Aftermarket Motocross Components

Telephone

Address


9825 Carroll Centre Rd, Ste 300
San Diego, CA
92126
Other Outdoor & Sporting Goods Companies in San Diego (show all)
MĀVIN Hockey Co. MĀVIN Hockey Co.
San Diego, 92109

Tired of paying $300 for a hockey stick? If you're looking to save some money without compromising performance, give us a follow.

WolfPack Armament WolfPack Armament
San Diego, 92126

God, Country, and the 2nd Amendment

Moss Research Surfboards Moss Research Surfboards
3035 Moore St
San Diego, 92110

Making high performance, sustainable surf crafts using Eco-Flex technology and locally sourced materials. The final products are called Aquatic Oddities.

OEX San Diego OEX San Diego
7718 Clairemont Mesa Blvd
San Diego, 92111

Located in beautiful San Diego, OEX features the best in Kayaks and Kayak Fishing Supplies sales and service since 1995.

Escusame Escusame
Los Santos
San Diego, 92057

Canvas Skateboards Canvas Skateboards
San Diego

Canvas Skateboards DESIGN - PERSONALIZE - CUSTOMIZE - DISCOVER SKATEBOARDS, LONGBOARDS & CRUISERS

ModiX ModiX
San Diego, 92126

Twitter: @GoModiX Instagram: @Go_Modix

Keyan Kiteboarding Keyan Kiteboarding
San Diego, 92110

Survival Cave Survival Cave
10620 Treena St
San Diego, 92131

Survivalcave.com is the ultimate place to find all of your camping and survival needs. Long term emergency survival foods at the best prices. FREE SHIPPING

TASCO MTB TASCO MTB
3132
San Diego

Mountain Biking apparel to keep you stoked on and off the trail

IDive Housing IDive Housing
San Diego

Welcome to the official iDive page, your source for news and conversation about iDive products

American Optics Pro American Optics Pro
5694 Mission Center Rd Ste 602-144
San Diego, 92108-4312

The Place for Optics, Magazines, Lasers, Red Dot, Accessories, Tactical Gear & much more. THE BEST PRODUCTS AT THE BEST PRICES CONTACT US FOR A QUOTE