Humble John's Gunsmithing

Status on our .308 rifle build. Brake threads are done and barrel is polished in addition to cerakote on the stock. Just need to blue the action and barrel next. More to come...

Rounds decided to get stuck which prevented proper cycling. No problem for Humble Johns! After we got the round out, we did a complete tear down to rid of burs and other issues and after a clean and oil she is ready to go.

Here is the status on our .308 build. Chambered and polished, greased up and ready to assemble.

Working on our 1st official rifle build for Humble John's. A Re*****on 700 chambered in .308 with a Douglas 1:10 barrel twist and a 5/8 - 24 thread for fun.

Time to bring an old Luger back to life...

Time to lap our bolt for proper fitment...

On our way to do our Humble John's rifle build!

Some work on a Bersa Thunder where the trigger did not decide to function properly. Completely, disassembled, replaced a part, cleaned, oiled, test fired and ready to go.

Heat shield install on a repro 1897 pump shotgun, also known as the trench gun. Made some adjustments and runs just like the original. Hello slam fire!

Hello everyone. Not too much longer and machine work here we go!

We are up and running! We can repair, modify and restore just about any firearm! Reach out for more info.