Team Pogi Bike Shop Main

Sold Via Lalamove ELITEWHEELS DRIVE II ❤️ with big discount message us

Elitewheels Drive 65D sold salamat bossing from Alabang ❤️🤝

Elitewheels six spokes for road or gravel 69,999

Marvel G36 Gravel Wheels

Msrp:46000 15% off promotional special offer:39100php

Inner Width:25mm
Rim Height:36mm
Lightweight

Rated 5.00 out of 5 based on 2 customer ratings
The Marvel G36 has been designed especially for long-distance and competitive gravel riding. It features lightweight rims with 25mm inner widths, making it perfect for wider tires. The rear hub has been specifically designed to reduce rolling resistance and to be easy to maintain. The wheelset has race-ready Sapim CX-Ray spokes and ceramic bearings. The G36 is lightweight, weighing just 1420 grams for the pair.
– Intended Use: Gravel / Road
– Brake Interface: Center Lock by default
Rim
Wheel Size 700c
Tire Compatibility Clincher/ Tubeless
Bead Type Hooked
Rim Depth 36mm
Inner Width 25mm
Outer Width 31mm
Hub
Front Hub Spacing 12x100mm
Rear Hub Spacing 12x142mm
Bearings Ceramic
Brake Compatibility Disc (Center Lock)
Freehub Type 4 Pawls
Freehub Compatibility Shimano / SRAM XDR / Campagnolo
Spoke
Front Spoke Pattern 2X/Radial
Rear Spoke Pattern 2X/2X
Spoke Count 20F/24R
Spoke Type Sapim CX-Ray
Ni**le Type Sapim Secure Lock
Other
Rim Finish UD Glossy
Extras Rim Tape(Installed), Tubeless Valves(Installed)
Weight (Pair) 1420±30g (Standard Hub) (without tubeless valves and rim tape)
Rider Weight Limit 275lbs/125kg
Recommended Tyre Sizes 700 x 30-50c
Certification UCI Approved
www.elite-wheel.com

Marvel II 65D
Msrp:48800 To 40000php💯

65d 1580g🔥
Inner-23mm Outer-31mm 🔥
Compatible Tire Sizes 700 x 28-40C🔥
Certification UCI Approved🔥
Front Spoke Pattern 2X/Radial (2:1)
Rear Spoke Pattern 2X/1X (2:1)
Spoke Count 21F/24R
Spoke Type Alpina Ultralite Aero
Ni**le Type Alloy Secure Lock

After years of research and development, our engineers have made advancements in maximizing a rim’s durability and responsiveness while reducing material, allowing for the next generation of Marvel wheels to be significantly lighter, despite increasing inner and outer rim widths to support wider tires.
The Marvel 50D II was designed to be an all-round wheelset, that performs well on the flats, hills, and mountains. The wheelset weighs just 1500 grams for the pair, making it a serious upgrade over alloy wheels for the amateur rider. The U/V-shaped rim profile improves lateral airflow, increasing stability on fast descents and in windy conditions.
In addition to optimizing the rim design, the second generation of Marvel wheels comes with several upgrades, namely ETRTO-compliant reduced hooks to offer better aerodynamics, comfort, and traction, Alpina Ultralight Aero spokes, and lighter rims

RIMS
When engineering a new wheelset, the first consideration is always the rims. For the Marvel II series, we started from the ground up. After listening to valuable feedback from our riders, we decided to create rims with wider tires in mind. Marvel II’s 31mm external rim widths are aerodynamically optimized for 28c and 40c tires. To take things further, we chose inner rim widths of 23mm, leading to an ideal tire shape that maximizes grip and comfort, while minimizing rolling resistance. We design, manufacture, and test our own resin, carbon pre-preg, and rims, allowing us to ensure our rims are of the highest quality and are free of voids and wrinkles.
What makes our clincher, tubeless-ready rims unique is that we use a reduced hook design. We see the benefits and drawbacks of standard hooked as well as hookless rims and have found a way to offer the best of both worlds. Our ETRTO-compliant reduced hooks allow for the aerodynamic, durability, and optimal tire shape that hookless rims provide with the security, tire compatibility, and ability to run higher pressures that a clincher can offer.
Additionally, our rims feature in our exclusive UNI technology. It offers wider and more modern inner widths, making them compatible with wider tires for enhanced performance and versatility.

SPOKES
In the Marvel II wheels, we are using Alpina Ultralight Aero steel spokes, which provide a significant weight savings over the last generation of Marvel wheels. They are some of the lightest racing spokes available, while offering added benefits such as excellent durability, longevity, and improved aerodynamics.

PERFORMANCE HUB
The Marvel 50D II uses our Motion hub, which features pawls-ratchet freehub mechanism, that has been tried and tested by our sponsored UCI pro cycling teams in World Tour races like the UAE Tour. It offers low rolling resistance and excellent longevity.
Just like all of our other designs, the Motion hub is made by us using 5-axis CNC machines. High-grade precision S&S ceramic bearings were chosen to improve their lifespan and reduce rolling resistance, saving you precious watts. While having high quality bearings is important, a perfect bearing seat fit is essential for optimal performance. Our CNC machines precisely machine bearing seats to 0.02mm tolerances, guaranteeing exceptionally low rolling resistance and improving longevity.

TESTING
At Elitewheels, we see value in ensuring what we offer not only performs well but has excellent durability and longevity. Each wheelset undergoes more than 20+ laboratory tests at our factory including various durability, longevity, and stiffness tests. We also ensure each wheel passes the UCI Vertical Impact Test, which gives the green light for wheels to be used at the top levels of professional racing.
Besides the laboratory tests, we put a strong emphasis on aerodynamic and real world testing. Our engineers run CFD (Computational Fluid Dyamics) programs for hundreds of hours during the design phase to aerodynamically optimize wheelsets before even producing the first prototype. After our engineering team is satisfied and the prototype is ready, we conduct wind tunnel testing to verify the results as well as real world testing by our staff and our sponsored UCI pro cycling teams, getting as much feedback as possible. The pro riders offer a unique perspective due to their hundreds of thousands of kilometers of riding experience with a large number of wheelsets.

Rim
Series Marvel 50D II
Wheel Size 700c
Tire Compatibility Clincher/Tubeless
Rim Depth 50mm
Inner Width 23mm
Outer Width 31mm
Hub
Front Hub Spacing 12x100mm
Rear Hub Spacing 12x142mm
Bearing S&S Ceramic
Brake Compatibility Disc (Center Lock)
Freehub Type 4 Pawls
Freehub Compatibility Shimano / SRAM XDR

Other
Rim Finish UD Glossy
Weight(pair) 1500g±30g (without tubeless valves and rim tape)
Extras Rim Tape(Installed), Tubeless Valves(Installed)
Rider Weight Limit 270lbs/120kg

www.elite-wheels.com

Drive 50D II

Msrp:72000 April Summer discount Limited Less 15%
To:61200php

Hooked Inner-23mm Outer-31mm Weight:1300g
Compatible Tire Sizes:700*28-40c

After years of research and development, our engineers have made advancements in maximizing a rim’s durability and responsiveness without adding material, allowing for the next generation of Drive wheels to remain lightweight, despite increasing inner and outer rim widths to support wider tires.
The Drive 50D II was designed to be the perfect all-round racing wheelset, balancing weight and aerodynamics. It weighs just 1300 grams for the pair. The U/V-shaped rim profile improves lateral airflow, increasing stability on fast descents and in windy conditions.
In addition to optimizing the rim design, the second generation of Drive wheels comes with several upgrades, namely ETRTO-compliant reduced hooks to offer better aerodynamics, comfort, and traction, quality S&S ceramic bearings, 4.5mm carbon spokes, and our one-of-a-kind Kinetic hub, which features a conical ratchet design

RIMS
Drive II wheelsets feature wider, 23mm inner widths and 31mm outer widths, making them aerodynamically optimized for 28c and 30c tires. Wider tires allow for a more comfortable ride, as they can be run at lower pressures. The wider inner rim width gives wider tires a better shape, improving grip and comfort, while the 31mm external widths improve the overall aerodynamics when paired with 28mm or 30mm tires, which are now the norm in road cycling.
What makes our clincher, tubeless-ready rims unique is that we use a reduced hook design. We see the benefits and drawbacks of standard hooked as well as hookless rims and have found a way to offer the best of both worlds. Our ETRTO-compliant reduced hooks allow for the aerodynamic, durability, and optimal tire shape that hookless rims provide with the security, tire compatibility, and ability to run higher pressures that a clincher can offer.
Despite the increase in widths, we were able to keep the same weights as the original Drive wheelsets. This was accomplished in part due to our new advancements in our UNI carbon fiber layup technology.

SPOKES
In the Drive II wheels, we are using 4.5mm aero bladed carbon spokes. As opposed bonded carbon spokes, ours are as easily replaceable as their steel counterparts. Each spoke weighs roughly 3 grams each. In our laboratory testing, they have proven to be 8% more laterally stiff than steel spoke, leading to more efficient power transfer when riding, saving you watts.
The carbon spokes on the Drive II wheelsets do not experience spoke twist, meaning they will always remain in the most aerodynamic position, guaranteeing you always get the same high level of performance. Our carbon spokes have been proven reliable and durable for over three years in the pro peloton by our sponsored UCI ProTeam and Continental teams.

KINETIC RATCHET HUB
The Drive II road wheelsets features our brand new, Kinetic hub, which uses a 50T star ratchet mechanism,instead of the previous pawl-ratchet mechanism. Kinetic’s ratchets are machined in a conical shape, allowing for increased engagement surface area which increases longevity. A new, stronger spring reduces the likelihood of skipping and slipping, ensuring a consistent riding experience.
The hub also features a new waterproof seal reducing the likelihood of ingress. A stronger spring has also been chosen, which significantly reduces the incidence of ratchets slipping and skipping when pedaling.
Just like all of our other designs, the Kinetic hub is made by us using 5-axis CNC machines. High-grade precision S&S ceramic bearings were chosen to improve their lifespan and reduce rolling resistance, saving you precious watts. While having high quality bearings is important, a perfect bearing seat fit is essential for optimal performance. Our CNC machines precisely machine bearing seats to 0.02mm tolerances, guaranteeing exceptionally low rolling resistance and improving longevity.

TESTING
At Elitewheels, we see value in ensuring what we offer not only performs well but has excellent durability and longevity. Each wheelset undergoes more than 20+ laboratory tests at our factory including various durability, longevity, and stiffness tests. We also ensure each wheel passes the UCI Vertical Impact Test, which gives the green light for wheels to be used at the top levels of professional racing.
Besides the laboratory tests, we put a strong emphasis on aerodynamic and real world testing. Our engineers run CFD (Computational Fluid Dyamics) programs for hundreds of hours during the design phase to aerodynamically optimize wheelsets before even producing the first prototype. After our engineering team is satisfied and the prototype is ready, we conduct wind tunnel testing to verify the results as well as real world testing by our staff and our sponsored UCI pro cycling teams, getting as much feedback as possible. The pro riders offer a unique perspective due to their hundreds of thousands of kilometers of riding experience with a large number of wheelsets

Restock Best V Brake Wheelset In Phil🇵🇭
RIMBRAKE MARVEL ELITE-WHEELS 50mm 40mm
One of Budget Meal's strongest training wheel sets

Msrp:32000 🔥🔥

Series:Marvel RimBrake 🤟
Rim Tape:Tubeless Compatible
Rim DepthAvailable:50mm
Inner Width:17-18.5mm
Outerwidth:28mm
Spoke
Front Spoke Pattern:Radial
Rear Spoke Pattern:Radial/Two-Cross
Spoke Count:18/21
Spoke Type:Pillar PA 1423
Ni**le Type:Sapim Secure Lock
Hub
Front Hub:QR Ceramic Bearing
Rear Hub:QR Ceramic Bearing
Hub Type:4Pawls
Cassette Body:Shimano
Other
Assembly Method:HandBuilt
Extras:Rim Tape
Type Pressure:120Psi Recommended Max
System Weight Limit:275lbs/125kg
Recommended Type Size:700*25c-700*28c
Weight:50mm 1595g+-
FEATURE:
Marvel is the most representative wheel set of Elitewheels, which can meet your competition needs with the least budget. Marvel has a highly balanced rigid adjustment that can meet the comfort of daily riding, and is also capable of long-term sawing and sprinting at critical moments. A variety of rim sizes with different heights are available. Climbing, breaking the wind, triathlon and more.
The Marvel standard is matched with ceramic bearing, and the high-moisturizing ceramic bearing can also save you more energy.
If your budget is limited, then Marvel is your best wheel choice
Elitewheels road bike carbon wheelset rim brake.
Versatile, sensitive, racing wheel, standard use of ceramic bearings. The best wheel set for you who have the dream of champions.
has 40mm, 50mm, 55mm, 60mm and other different width wheel options.
The shaft center and hub shell with ultra-high machining accuracy maximize the rolling coefficient of the ceramic bearing
Stronger Performance Ceramic Bearing

Ph Version Warranty:2Years Factory Limited Warranty

Visayas Service Center:JM Bike Shop
Luzon Service Center:ELTP Bike Shop

Msrp:32000📸

Sold via Ap Cargo ❤️

Marvel 60/82V Rim Brake Available

Msrp:37000

The Marvel 82V wheelset is designed for those who want an all-rounder that performs best on the flats, especially in time trials and triathlon races where every second counts. While they are our entry-level wheels, don’t let that fool you. They are tried and tested and come with Pillar spokes and high-precision, ceramic bearing hubs. The wheelset has been aerodynamically optimized for 25-28mm tires and comes in at only 1873 grams for the pair.
Optional upgrades to Sapim CX-Ray spokes and DT Swiss hubs are also available.
–Custom option for different rim depths (Refer to FAQ for more information)
*It is recommended that you check with your frame and brake caliper brands for maximum tire clearance.

Rim
Series Marvel
Wheel Size 700c
Tire Compatibility Clincher/Tubeless
Rim Depth 82mm
Inner Width 18.5mm
Outer Width 28mm
Hub
Front Hub Spacing QR x 100mm
Rear Hub Spacing QR x 130mm
Bearing S&S Ceramic
Brake Compatibility Rim Brake
Freehub Type 4 pawls
Freehub Compatibility Shimano / SRAM XDR / Campagnolo
Spoke
Front Spoke Pattern Radial
Rear Spoke Pattern 2X/Radial (2:1)
Spoke Count 18F/21R
Spoke Type Pillar PA 1423
Ni**le Type Sapim Secure Lock
Other
Weight(pair) 1873g±30g
Extras Rim Tape(Installed), Tubeless Valves, Quick Releases, Brake Pads(2 Sets)
Rider Weight Limit 285lbs/130kg
Recommended Tire Sizes 700 x 23-33C
Max Tire Pressure 120psi Inner 25c

RIMS
At Elitewheels, we design our Marvel wheels to match the needs of recreational cyclists. As opposed to alloy rims found on most road bikes, Marvel wheels are stronger, stiffer, much more more aerodynamic and significantly lighter. In fact, wheels play the biggest role in aerodynamics on a bicycle. As opposed to reducing weight elsewhere, a lighter rim saves rotational weight, making for a more agile feel and faster accelerations.

SPOKES
Choosing the right spoke to build a wheel is essential. We specifically selected Pillar PA 1423 aero bladed spokes. They are cold forged making them strong, allowing them to be able to withstand over 300kgf of tension.
Optional Upgrade: (Sapim CX-Ray spokes) and (Pillar Wing 20) spokes can be substituted for an extra cost, saving more than 90 grams off the complete wheelset.

PERFORMANCE HUB
To get the most out of this carbon wheelset, we specifically designed the hub with high flanges to further increase lateral stiffness and improve handling. Elitewheels manufactures its own high precision hubs with Fanuc CNC machines, which can machine to tolerances of just 0.02mm. This not only allows for lower rolling resistance but also increases bearing longevity.

CERAMIC BEARINGS
The Marvel 82V’s front hub uses two 6803 mixed ceramic bearings. The rear hub uses one 6903 and three 6803 mixed ceramic bearings. These large bearings offer better durability over standard size ones. The use of large mixed ceramic bearings will allow you to have a more efficient bike, saving you precious watts.
Read more about ceramic bearings.

BRAKE SURFACE
The Marvel 82V uses a blend of 270 ℃, high-temperature resin, developed by Elitewheels, and Japanese Toray T800 carbon fiber for the brake surface. This heat resistance ensures excellent braking performance even on long, steep descents. The brake track also features laser-etched grooves to clear water away, giving safe, consistent braking in wet conditions.

Elves Nandor Pro 29 carbon 43,000 ❤️

Elitewheels DRIVE 50v rim brake carbon wheelset carbon spokes ceramic hubs big discount sold via lalamove❤️

Sold ELITE MTB 29er CARBON WHEELSET microspline Sapim Spokes big discount message us 📧