Climate is a manufacturer of stainless steel, glass fused to steel, epoxy, weathered finish, powder PERMASTORE® tanks are built and tested to “zero defects”.
Climate Incorporated is ‘An Engineered Solutions Provider’ manufacturing Climate Tanks�, Halcyon Assembly�, SeeLevel Blue�, PosiFill�, MaxAccess�, and distribution of Permastore Silos and Tanks. We give you the assurance and dedication to the highest quality associated with our brands. We use high quality raw materials, which meet or exceed the requirements of relevant tank design standards and ap
plicable International Standards: American Water Works Association (AWWA D103), European Union (EN 10025, EN 10149), American Society for Testing and Materials (ASTM A1011), National Fire Protection Association (NFPA 22), etc. Using proprietary technologies we provide architects, engineers, and distributors with an engineered solution that will meet and exceed their specifications which encompasses tanks that embed into the concrete foundation, have a steel panel bolted floor, or mount to the foundational sub-straight that is provided and designed by others. Climate Tanks™ are manufactured with steel panels and are attached together with bolts. The tank is either sealed with mastic on the vertical and horizontal panel seams or lined with a PVC liner that is fixed to the top of the tank through reinforced eyelets. Tanks with liners use polyester geo-textile matting, which is placed on the tank floor and walls to protect the liner from damage during installation and use. Our tanks typically have these roof designs:
PERMADOME® Geodesic Dome Roofs
Tapered Beam and External Beam Roofs
Trough Deck Roofs
Single and Double Membrane Roofs
PVC Covers
Climate Incorporated partnered with PERMASTORE® to provide four separate and distinctive glass grades of glass-fused-to-steel technology: TRIFUSION® PLUS, TRIFUSION®, ISOFUSION®, and ECOFUSION® and FUSION® V1100 epoxy bonded tank technology across the globe. We serve the above ground steel bolted storage tank markets throughout the world with the highest quality standard offering long life, low maintenance, and low lifetime cost. Modular construction of bolted steel tanks allows benefits such as: rapid installation, construction in remote and restrictive environments, factory quality control, and cost competitiveness. If there is a bolt in every hole, a nut on every bolt, and mastic in every joint, the structural integrity of the storage tank is insured. With over 60 years experience, Permastore is recognized as one of the world’s leading tank manufacturers dedicated to glass-fused-to-steel technology, a material able to withstand the rigors of the construction site and provide a lifetimes protection in almost any water/wastewater application. Permastore has over 300,000 tanks in operation in over 110 countries and have been accredited with a 30 year design life. Our clients choose either stainless steel, glass fused to steel, epoxy finish, powder coated, weathered finish, or galvanized coated tanks for several different types of liquid treatment processes and applications: Activated Sludge; Aeration; Anaerobic Digestion: Biogas & Biofuels; Borehole & Drilling Water; Bulk Material; Chemicals & Liquids; Chlorine Contact; Coagulation/Flocculation; Disinfection; Dosing; Equalization; Filtering; Filtration; Firewater; Industrial Effluent; Mining; Permeate; Potable Water; Process Water; Rainwater & Stormwater Harvesting; Reverse Osmosis; Seawater Desalination; Settling; Sedimentation; Silos; Slurry; Wastewater; amongst others.
03/15/2025
Climate Fire Suppression Tanks are designed for each specific application, global geographic location, and are governed by the National Fire Protection Association (NFPA) code under Section 22. This specific tank we designed and manufactured for one of our clients for a distribution center project within a matter of weeks. Our tanks exceed both (AWWA) American Water Works Association, Texas Commission on Environmental Quality (TCEQ), and NFPA Standards. All of our steel bolted tanks are 100% factory finished and crated to protect them from any damages during shipping around the world; easy to transport with lower freight costs and neatly organized so assembly is simpler. Climate LLC manufactures tanks with liners that are galvanized or powder coated, mastic sealed and non liner bonded epoxy, glass-fused to steel (GFS), and stainless steel tanks with ladders, platforms, and safety cages; nozzles, SeeLevel Blue™️ level indicators, Halcyon Assembly™️ vortex inhibitors, top access hatches that are locking, hand railings and walkways, and side wall bulkheads and manways. For product and solutions contact us: www.ClimateTanks.com
06/01/2024
Climate Tanks™️ glass-fused-to-steel tanks and epoxy-coated tanks are both types of bolted steel storage tanks that are commonly used for water storage, wastewater treatment, bulk storage, effluent, chemicals, and other applications. There are a few key differences between the two types of tanks: One of the main differences is the materials used to construct the tanks. Glass-fused-to-steel tanks are made by fusing a layer of glass (Fritz) to the steel surface of the tank, creating a strong and durable finish with a design life of 50 years. Our Epoxy-coated tanks, on the other hand, are made by applying a layer of epoxy to the steel surface of the tank. This creates a smooth and corrosion-resistant finish. We electrostatic test our panels with voltages of 1500v so that our clients have a peace of mind that they have ZERO discontinuity on every panel before we ship from the factory. Contact us at ClimateIncorp.com or ClimateTanks.com for assistance.
Climate Tanks™️ glass-fused-to-steel tanks and epoxy-coated tanks are both types of bolted steel storage tanks that are commonly used for water storage, wastewater treatment, bulk storage, effluent, chemicals, and other applications. There are a few key differences between the two types of tanks: One of the main differences is the materials used to construct the tanks. Glass-fused-to-steel tanks are made by fusing a layer of glass (Fritz) to the steel surface of the tank, creating a strong and durable finish with a design life of 50 years. Our Epoxy-coated tanks, on the other hand, are made by applying a layer of epoxy to the steel surface of the tank. This creates a smooth and corrosion-resistant finish. We electrostatic test our panels with voltages of 1500v so that our clients have a peace of mind that they have ZERO discontinuity on every panel before we ship from the factory. Contact us at ClimateIncorp.com or ClimateTanks.com for assistance.
05/08/2024
I’m extremely proud of her!
04/09/2024
Another island expanding its potable water system with a Climate Tanks™️ glass fused to steel above ground storage tank.
03/17/2024
Happy St. Patrick’s Day
03/10/2024
Climate Fire Water Tanks are designed to the specific application and are governed by the National Fire Protection Association (NFPA) code under Section 22. Our tanks exceed both (AWWA) American Water Works Association and National Fire Protection Association (NFPA) Standards. All of our steel bolted tanks are 100% factory finished and crated to protect them from any damages during shipping around the world. Tanks for fire protection are in high demand due to increased regulations and insurance industry requirements. Climate Tanks™️ can create individually engineered tanks to serve as dedicated reservoirs and water supply configurations for commercial, industrial and municipal applications. We are the trusted name in the steel bolted tank industry worldwide. www.ClimateTanks.com or www.ClimateIncorp.com.
Most above ground storage tanks used for fire protection are commonly one of three designs; bolted steel, welded steel or concrete. Bolted steel cost is 40-60% lower than concrete or welded steel. Bolted tanks also offer a much lengthier warranty period. Bolted tanks are manufactured in sizes from 550 to 6,000,000+ gallons. Climate bolted steel tanks are precision fabricated: Fire protection tanks are designed to the specific application and are governed by the National Fire Protection Association (NFPA) code under Section 22. Our tanks exceed both AWWA and NFPA standards. Climate offers a full line of manufactured tanks with liners that are galvanized or powder coated, mastic sealed and non liner epoxy, glass-fused to steel, and stainless steel tanks with ladders and safety cages; flanges and vortex inhibitors, top access hatches that are locking and hand railed platforms, and side wall bulkheads. For additional product and solutions please contact us at: www.ClimateIncorp.com.
03/15/2025
06/01/2024
05/31/2024
05/08/2024
04/09/2024
03/17/2024
03/10/2024
03/08/2024