Alpha Fitness

Smh…today is the day for people to contact me for the following…and truthfully it’s a shame these folks won’t do this during office hours…because that is where you will go if I don’t get some help here…

First….HYGIENE…I will state this…I did walk in the gym and could smell the funk. Not sure why you could not smell that…but others could and it lingered.

Don’t wait to apply deodorant…you already smell…applying deodorant after defeats the purpose.

I have gotten more feedback…. that I have to go to the gym at that time and have a conversation….just understand if I walk up to you and spray you down with Axe which I despise WE have hit nuclear level…wash your asses and clothes folks…

Next is dropping and slamming weights…for me…this screams I need attention and I want everybody to look at me…you will not get the attention you are seeking but I will validate your feelings when I speak with you…

This is simple lifts…dropping dumbbells, letting go of handles that the carabiners and rubber stops are damaged…now we have a snapped cable on a brand new piece…smh. There is no point in dropping weights from the high point…this makes you a c**t…nothing more. So please stop. It is enough.

Firing up a different canoe…it will still be the do**he canoe but if you don’t want me to go diabolical you will stop…

It is a small ⭕️ of people. I do need your help to eliminate this behavior…so in this case my snitches will be rewardrd with no smell and no do**hes…

kerbear rant over…I hear your voices and I will handle your concerns…

Feedback…Open Gym Day…

We are looking for a date in the future where we can slap on our hoodies and be comfortable…

October/November (A Saturday)…time frame…example…10-3pm or whatever. Normal Saturday hours are 9-1pm. Let’s hear your feedback…On date and time frame…

The goal is to bring in vendors/booths/maybe some surprise guests…

Vendors…please reach out for vendor support…I will be doing the same.

This is dependent on some new equipment dropping as well…with Maxpump entering the chat again…

The day is to allow outside guests to enjoy a workout after signing a waiver liability…bring a friend, family or just drop in and see for yourself…

Staff…surprise…😂

Once we soldify a date I will make a flyer…I personally will not but we got people who will 😂.

Rumor time…😂 don’t start none. We don’t need anymore of those…we are simply doing an event to showcase who we are…

They don’t know yet…but they do now…❤️💯 love this family… Marys Burritos will be doing some catering…

What say you….

Software Update;

For those who have been affected by the old software company Club Automation and the equity firm Daxko please contact them directly with issues concerning the continued drafting of my members after them failing their own agreement.

Once again….these genius’s actaully sent out a default letter from another gym….only to follow up with another letter which stated disregard without ever notifying ME. After they had been fired…for drum roll…NOT being factual with what they can and can not offer.

We are working behind the scenes correcting corrupt data which they did with purpose.

We will be releasing a new App. Stay tuned…

We will be releasing a new webpage. Stay tuned…

We are actually involved with designing a new software to help us help you…the member.

I am extremely proud of staff and the help…🙏

The good news…we have new equipment coming in…

We will have an open gym day…we are looking at October sometime….HOODIE TIME….for cooler weather…

If you are a vendor…would like a booth for the event…reach out…

And I am open to ideas…

Please please verify the double charges or mishap with a paper copy. No screen shots. I need the paper validation…

Thank you…

Members…first let me say I have tried my best to work with Club Automation/Daxko on the double draft situation and data transfer.

First…I will do what is right. Please. I do not need money…I need to return yours. Club Automation nor Daxko the parent company will validate what they have done with drafts and those they stated they refunded.

Their is no way for me to validate the information. I need your help two fold. One to print a copy of the over charge. I WILL CUT A CHECK…and return your money. That will then be forwarded to my attorney for action.

Folks. Please. With my personality I need you to understand I only want what is rightfully due. To prove a point, stay tuned for our next purchase. It has already been done and paid for.

🙏thank you to everyone and this is 98% the whole membership to keep the funds. As much as I would like to…I can’t.

I got the answer from Club Automation and Daxko I was expecting. They did not honor their own terms and violated the agreement…

I will share facts…the fact is the software faulted and I never signed off…

Gyms…If you are looking for a software company Club Automation nor Daxko is the answer.

If you are a gym looking for software Daxko nor Club Automation is the answer…

Final Note…you can’t just call or show a screen shot. Print it out…not pending or processing…it has to show the process as finalized.

Thank you…the bear…

Hey…the new software I am learning…I’m not efficient 😂…I even got from some kids yesterday that were getting a day pass…how long have I worked here 😂🖕🏼…😂 it was 💯% funny…

First…I lost the pending job list. 💯% my bad…

With that we will be adding new staff to the gym flow…

If you are looking for part time job we just may be a match…

DM the instagram account or stop by and speak with staff…

Software Update: I am aware of a doubling billing situation. Today Is the day.

We entered into an agreement with Club Automation/Daxko. In simple terms they use words to have you sign an agreement that does not uphold the words and function of the system.

We have switched software companies and have moved our platform to Visual ClubMate. Outstanding company and are working hard to fix what Club Automation and Daxko has created which has been nothing short of predatory practices based on their lack of a feasible software platform.

We officially switched and went live with Visual ClubMate on June 24th. Unfortunately the old software company continued to draft accounts after violating their own agreement.

We are well aware of the situation and I work on this everyday. We are asking for a moment to work through the mishap while Club Automation and Daxko continue to be a rouge company and circumvent the direction we have asked for.

If we have double drafted you we will get the funds back to you. For those being understanding…thank you…it is a stressful situation and I do appreciate the thoughtful support…now for those who decided to go at the situation, staff. This behavior does not help you get your money back.

I know it has messed up accounts. I know it placed some of you in situations that is not your fault and no one feels worse than me…I will take care of you…

All I am asking is to let me figure a cost effective way to correct the situation without costing me additional funds that are not nessecary to spend.

I want that money for equipment 😂❤️

Software Update…I am very aware of a system glitch between the old software company and new software company.

The new software company did as I had directed for a successful transtition…the old software company did no favors and showed exactly why we changed…

If you find a mishap with your account please bring your documentation to the office for verification and we will handle the rest.

You have my apologies if you have been affected…I am thankful for an understanding membership…

Kerry

We got news and we got great news…

First and foremost is the new Prime high and low row will drop Monday…that is the great news…

The additional good news is…Maxpump adjustable smith machine has entered the conversation…

It can be adjusted from 0 degree to 5 and 7 degree angles. Yea Boy…

Has just been ordered…10-12 weeks….

Ladies…I am looking…for a new good girl bad girl piece…abductor and adductor…just haven’t found what I am looking for…ideas?

Some great NEWS….The final deposit has hit the mail and we will be seeing this within the next couple weeks.

As always respect the equipment that helps you with your health and wellness needs. It is that respect that keeps the club clean and functional. It allows us to keep expanding the badass equipment that continues to drop…

I will begin to work on our equipment that is old school but needs to be refurbished…we will be sending a few pieces out shortly…

The treadmill maintenance was done yesterday just in time for you to drop tears…

The ice cream has been a hit…I have been my own best customer…its protein…💀

Stay tuned for our member appreciation day…I got you…Fall and hoodie weather…is the plan…